Cummins ECM update

[@marshmellow1323]

Good info keep up the good work

[@dirtyassdieseltech6348]

Thank you

[@anewvisionforhaiti6467]

I have a big problem I am getting PSN 5248 FMI 14 can you help me please?

[@dirtyassdieseltech6348]

This reply is very late and I apologize. Not finding that code for Cummins. If you haven't already resolved the issue, please send my the ESN and the FC#

[@bcm20003]

Great info. My name is Brian. I hope you can help me with an issue I'm having with my 2013 freightliner m2 106 cummins 6.7. The issue I'm having is I realize I'm chasing my tale. It started with engine light on first repair pointing to the cam position sensor. Now after 4 sensor ( cam, crank, barometric, and Map) which Map did cut of light by it self for about 30 mile. replacement and reset light comes on and the last 3 checks it only the Barometric sensor. Any ideas would help. Seems as it run as normal.

[@dirtyassdieseltech6348]

Can you send me the engine serial number and fault code number?

[@bcm20003]

Engine # 73430414 Fault code 295

[@dirtyassdieseltech6348]

Can you double check the engine serial number? The number you sent me is bringing up a 4 cylinder off-highway engine

[@bcm20003]

@@dirtyassdieseltech6348 did you get it

[@bcm20003]

@@dirtyassdieseltech6348 can you help me

[@kennyp4967]

I have a ecm problem the darn thing keeps thinking the break pedal is pushed in and won't allow the bus to regen if I swap Ecm the bus works fine

[@dirtyassdieseltech6348]

Try reflashing the original. May need to order a fleet cal and recalibrate

[@ericjohnson9234]

What did you click on to see that page on quickserve?

[@dirtyassdieseltech6348]

On the left side of the screen open the my applications tab and go to ECM calibration revisions

[@ericjohnson9234]

Is that the paid version on quickserve?

[@dirtyassdieseltech6348]

It is. I work for a Peterbilt dealership, so we have full access. I do highly recommend paying for the fleet subscription.

[@AndersonAdibe-dz8kt]

My ECM is bad,what do I do?

[@dirtyassdieseltech6348]

Option 1- find a company that can repair the board Option 2- replace it yourself and try to obtain a fleetcal license Option 3- have a dealership replace it and calibrate it

[@mohammedaboobaid6449]

Hi I need download flash file Cummins

[@dirtyassdieseltech6348]

That is downloaded on insite and uploaded to the ecm