CUMMINS NT 855 / N14 COMPLETE OVERHEAD INCLUDING ROCKER INSTALL

[@blakemason-hh7rd]

I’ve watched for awhile now I don’t usually comment but I felt the need to say. I’m amazed the wealth of knowledge,Hes forgot more than most people will ever know. And the best part is he takes the time to show the right way/why he does what he does on every video.As a younger guy in the trade this is exactly who you look up too

[@DunelFrancoi]

❤

[@davidsanders6957]

Miss & love my DAD !! Good memories !!!! XOXO

[@paulcaliendo9402]

Thank you for showing all the steps on setting and adjusting injectors and valves. That's why I enjoy watching all your videos!! CHEERS

[@donaldcampbell5277]

Some of the old guys didn't need the book. Experience is a book in itself.

[@terryfromsouthcarolina4601]

Man that is one sweet Cummins! This video was long but it brought back memories of younger years, some of which I had forgotten. You need to give your talented helper a raise....or at least a hug! Just make sure she puts some rocks in her pockets the next time you have her stand on the rocker boxes, LOL! Great job my friend! Cheers Terry

[@ChicagolandConcrete]

I hope your customer knows how lucky he is to find a gem like you. Wish you were in our backyard!

[@FromLandVegemiteSamich]

Watching your videos is how I enjoy watching great tradesmen at work you can tell by how they do things if they give a damn compared to slip slip slap and out the door cya

[@richardhoneywell7411]

Great video Mr & Mrs J.C.Smith nicely done . Sounds great looks like its running smooth. Thanks for sharing stay safe Mr & Mrs J.C.Smith.

[@Carcrafter7165]

That’s a Night and Day difference on the Cummins. It runs so much smoother than it did before. This is a very detailed video of how to. Love the work you do.

[@cullenmiller8170]

Nice video and great explanation on the overhead. That brought back memories. I haven’t worked on one of those since the late 90’s. Now I feel old. 😂😂

[@michaelhartloff3833]

I love watching professionals work

[@randydobson1863]

hello J.C & Mrs. Smith & it's is Randy and i like yours video is cool & Thanks J.C & Mrs. Smith Friends Randy

[@gregolson1824]

Just an FYI when tightening the rocker shaft up it's best to tighten both sides at the same time. I put an Allen in a vise balance the rocker box on it and tighten up the other side with another Allen. This gets both sides tight and also prevents you from snapping off the oiling set screw, ask me how I know. 17:30

[@j.c.smithprojects]

hard believe a 70lb ft of torque could break that hardened pin. wonder if someone used an impact on them before. i have never broken one.

[@gregolson1824]

@@j.c.smithprojects I'm sure an impact would do some damage. After having one break on me, could have been cracked already, and finding multiple snapped off ones. I've decided it's best, for me at least, to take them apart and put them back together with two Allens. A little piece of mind for myself I guess, it a really PITA to get the rocker shaft out with the tip of the set screw snapped off in it.

[@greggb1416]

Excellent video..! Thank you sir.

[@brianherron5400]

The truck sounds good 👍, probably the best it's ran in a while. Nice job. Have a great evening, JC and Mrs Smith

[@Prariedog]

Great video ,thanks for sharing . Happy new year 🎉

[@scotthultin7769]

Hi JC thank you for sharing 😅

[@tonypatrick9362]

Awesome job to both glad to see it up and running hopefully back to work soon making money LoL

[@chrishigdon1070]

nice work love the tubing flare tool next purchase for me, i have the old hand held manual

[@ricklakes9405]

Very nice job there J.C. Engine sounds good.

[@Stickerstacker]

You guys are great, I like the heavy truck videos you make, thanks.

[@charliecurry6249]

Excellent Work

[@lonnieblackwell9215]

Very good video. Quality work, I hope that your customer appreciates the work that you put into their equipment.

[@SunShyne_Culture]

He's a master mechanic with OCD 😂 very exceptional ❤

[@HODGEPODGEDODGEGARAGE]

Nice job with the video J.C 🙂👍 Very informative 🔧🔩 I hope life is treating you and Mrs. S well

[@ydocproductions5593]

I can see how you would need to stay focused on the task at hand cause it would be real easy to loose track of what you’re doing. Great job explaining how the overhead adjustment works J.C. the engine sounds really nice after all that work👍

[@j.c.smithprojects]

now you can do it on your big cam when you get one.

[@GentlemanJack-o2g]

Thanks for information of Cummins unit injector calibration

[@waynep343]

Did you see all the N14 oil pumps with excessive end clearences right out of the box on jpaydirts channel. He finally took a new pump to a machine shop and had the housing lapped to reduce end clearance to 0.005" from 0.008" and greatly improved his oil pressure. 0.008 is max on a worn out pump. Yet brand new pumps come there. Somebody in a different video. Spun the pump with oil in it. The oil flowed back thru the pump instantly as soon as he stopped turning the drive.

[@j.c.smithprojects]

i watched jeffs video. its like everything else made today.....crap. this system is designed to run 35 to 45psi. we had 42 psi on the dash gauge. i put an oil filled manual gauge on the pump and it showed 47 psi at 160 degrees. i think its ok. however, i will be rebuilding the old pump for another big cam and it will be much tighter tolerance.

[@DependableAutoTruck]

So nice to see someone who likes to do things correctly

[@JamesPretty]

love doing cummins overhead

[@Eric.schmidt]

That thing sounds good.

[@ronrontordicillas5739]

❤

[@Ezrider359]

engine sounds like its running great.

[@RamBabu-ev9wl]

Good job 👍

[@aserta]

Looota work you put into this engine. Kudos to you for sticking through it all. I'm curious about how the engine will feel once you're done.

[@woody95124]

Darn good job bud

[@xPr1m3]

Great video, I was hoping to see the rocker boxes going on. We're installing the rocker boxes on our big cam 4 and if you get the pushrods in the adjusters correctly, some of them hold the rocker box up. Do you have to draw the boxes down with the bolts at some point? Or is there a spot on the cam that gives enough lash on all 6 pushrods that the box will sit down flat on the head? Edit: Your note at 23:44 seems to say no, you should be able to get the rocker box on flat. We backed out the adjusters enough that the pushrod cup was pushing on the arm itself and it still wouldn't go flat. We checked that the pushrods are in the cup of the cam followers. I'm a little perplexed at the moment.

[@j.c.smithprojects]

you should be able to back the adjusters off and get the boxes sitting flat. if not, i would check your push tubes. they are either not in the cup of the roller or the wrong ones in the wrong place. injector push tubes are different from valve push tubes.

[@nelsonmattoon150]

He is going to have a almost new motor when you get done

[@DependableAutoTruck]

Thanks for sharing

[@staym925]

Does that compressor put out more volume and does it work better then the original?

[@rossnolan2883]

Nice 😊

[@thomaslockley945]

Will this rocker n injecters setting procedure work for a 71 small cam nhc 250

[@normangallant9879]

Good job

[@james029318]

Anyway you can help me out this the governor part number. I’m currently changing my BC3 over from a Cummins 3024365 Show needing The governor Short coupler sleeve 199358 (or cut mine down) Compressor manifold, or air inlet tube (sn3711ab) are these numbers and parts correct for what you needed to switch?

[@PughFarms]

We have a Cummins L10 non STC internal balanced that we have to adjust valves and injectors would it be the same procedure as the 855 other than one head compared to the 3. Were not finding much info on the L10 non STC.

[@j.c.smithprojects]

cummins quick serve website. you can gat a manual for your engine by its serial number.

[@ianatkinson8464]

😎👍

[@paulstalcup3229]

i have a oil leak under my rocker cover box , number 1&2 , what i’m worried is can i make a gasket with the gasket material? i ordered a gasket but it wasn’t the right gasket my trouble with ordering stuff is my ID tag is missing so i don’t know the CPL and all the information the tag had , and i’m wondering how to replace the o rings in the end caps of the rocker box also mine do not screw in i guess i will have to punch them out? the rocker box did not leak until i replaced the water pump my help forgot to tighten the two bolts on the plate but when i did tighten them one side stop leaking but the lowest side on the slated engine didn’t ! i dont see how it ruined gasket with the bolts not being tightened

[@j.c.smithprojects]

the engine serial number is usually stamped on the driver side rear right below the top of the deck on a machine flat spot.

[@johnwarren-649]

This is a lost art. The way your doing the injectors is the way i was taught years ago my a old man for the big cams. Most don't realize you gotta go around twice to get all of the vavles an injectors.

[@jonathanmurphy4562]

I like seeing the old iron going still all these new pacar engines and other engines with emissions are just junk , simple is just way better

[@stacyrose9225]

I hope u meant. 6” inch pounds

[@j.c.smithprojects]

yeah., im sure i made that mistake because i dont do it that way and have not thought about that spec in a long time.

[@michaelhartloff3833]

Wassup