Custom Brake Ducting and Brake Backing Plate Install | vlog 071

[@solid_spec]

Great find with the downspout adapters! That's being resourceful

[@danielsimpson8929]

I keep bits of 2x4 wood around for different things. One being to act as backing behind flimsy materials that I need to use a hole saw on. You could go as far as tacking the plastic down on either side of where the pilot hole will be with a couple wood screws. Thanks for sharing.

[@vmoutsop]

What type of ducting tube did you get and from where? Also, leave the other vent open, it will reduce the negative pressure that is created in the wheel well.

[@BlackFlagged]

I used this hose: www.condorspeedshop.com/collections/e30-parts/products/copy-of-3-neoprene-brake-ducting-hose

[@BlackFlagged]

And good to know about the other vent, thanks!

[@vmoutsop]

Thanks again for the link. That's a pretty good price. Having a hard time finding good tubing at a reasonable price

[@vmoutsop]

Came across that when dealing with canards. Canards have to to be 2/3 of the way up between bottom of front bumper & top of wheel well, so the air gets deflected into the wheel well to help disperse the negative pressure.

[@DefaultDC]

Hmm, U mounted to ducting like that. Great and smart (and ofcourse clean) but im thinking now. How does it moves when u turn?! Is the movement so small that it just ""stretches""? Would like to see it in *action*

[@BlackFlagged]

I made sure all the slack in the hose is by the backing plate (as opposed to under the car between the two holes), so there’s enough slack there to move with the wheel. I’ll try to get a video of it soon

[@DefaultDC]

Okay nice done :) Hope to see it :)

[@dannynewman2790]

Protect those thin hoses with a rubber coating so they don't get ripped in half from road rocks

[@agatinofortunato]

ever make it to Sema?

[@ATLRIOT]

I think we're going to get some of these for our RX8 enduro 24 hours of Lemons car. but I would think this would be overkill for a street. Don't get me wrong great vid, and DIY, sometimes its just fun to make stuff.

[@jermainesmith1333]

Great job!!! I love the way it all looks

[@BlackFlagged]

Thanks!!!

[@gregorykusiak5424]

Did the mod improve stopping distance, brake life?

[@vijendrasingh1076]

Wye u not hone in disk plate✌️

[@thanos7360]

need to see some 46 m3 i saw the e30 alot latly keep up the nice work

[@BlackFlagged]

I agree! I’ll start working on one

[@TheNastyboypro]

Question, will the brake backing plate fit the e46? GREAT video keep up the work

[@skipperrichman4278]

ya make it clean you'll go far

[@barfmeister8509]

Another great vlog 👍👍

[@BlackFlagged]

Thanks!

[@rusudarian]

you are my favorite youtuber 👍🏻

[@BlackFlagged]

Awesome, thanks!

[@takeo8478]

Love bears, others no longer manufacture, you take care of one, you have all my respect :P

[@LogitechXibanga]

6:51 when he learned the basics of drilling

[@jalalhad4645]

🇫🇷 Clean and cool ..

[@BlackFlagged]

Thanks!

[@jalalhad4645]

May be l m not an M BMW owner (i have a BMW 330d e46 2003 ) because of the gasoline price 1.50€ à liter ... but M BMW is my dream car ... 🇫🇷

[@BlackFlagged]

M or not, they’re all great cars! 👌

[@PlaytowinT]

Jalal Had it was 1.50 for the longest time here in the netherlands. Gasoline now costs 1.65. My 330ci loves it though😂

[@dennisvanderben2719]

little bit smoother talking in the future would be great, but still a great vid man!

[@BlackFlagged]

Thanks