Custom DIY $10 2018 Harley Fat Bob LED Tail light / Brake

[@hozurdaddy]

This is probably one of the best tutorial videos I've seen!!!! I was going to cut new turn signals in my saddle bags but after seeing this I might run the same system

[@roadking155]

I hope Harley sees your video so they will improve their bikes. The led lights look so much better. Great job!

[@PaulAlexandro]

This really helps! I'm still getting a full yellow light when I press the break. Turn signals and running light work fine. Added the diode to the red cable just like your video/diagram. Still get yellow with either break. Soooo frustrating. I would truly appreciate your help! 🙏🙏

[@livetubing]

And this ladies and gentlemen is how you do a real installation video tutorial. It’s all in the Details. 👍

[@joelpinay6725]

Great content thinking about getting this same bike but also dislike all the exact same things you mentioned in first video I believe, can’t wait to see future mods

[@peacewithyou503]

Thanx. One of the best installation vids on led tail lights.

[@saddle8bag]

Great job AGA! You should email China your instruction and have them build them for you for a buck a piece. You can sell them for $199.

[@markman63]

saddlebag china paid attention, you can buy these now for $15 on ebay

[@SWhite-hp5xq]

By the time you’ve sent the first 3 lots back due to being made in reverse, suited for ac power and in white, it’s probably best just make your own and save the hassles!

[@ringo4419]

That was cool, but I personally would prefer separate indicators (blinkers) pretty much like the originals, the rear light was great, changed the bikes personally in an instant!

[@Jon_Erickson_Official]

Thank you so much for this video. I just did the same thing with my Harley. This video was exactly what I needed 🤘🏼

[@MrDilarius]

Hello sir, please explain your license plate parts and how do you have that light, how did you achieve it the way it is now ? Thank you much !

[@doulos77]

great job AG

[@xavierwatson8682]

Good video. But I think your schematic at the end is backwards from what is shown in the video. In the video there is only the purple wire running from the left side (the gray terminal) and connecting to the yellow wire. But in your schematic the blue, black, and purple wires are all running from the gray terminal. I’m a little confused.

[@bobberguy1]

Good video and you do a great job narrating. Avoid the dealer and use the savings for gas money!

[@likeketeanio6011]

Appreciated your video on the R/B/T rear light installation, extremely helpful. Can I ask what is the item #, product #, or model # of the tail light itself? Thanks. Your assistance is greatly appreciated.

[@mekongman3339]

Harely is always over-charging/pricing their Loyal customers. Lol GJ Love it.

[@MBCITB]

Really cool. I worry a bit that its a bit hard to distinguish which direction you are turning. With the flashing I dont get a good indication of left or right. But looks great overall.

[@mustbescud]

how do you make the diode splitter?

[@serviceproper]

thanks for the video. Link to the LED strip? Thanks

[@delta2cid]

Hello. can you send me a link of the amazon product? i see a couple of them. Im wondering if they are all the same. Also my second question is have you figured out how to get the tail light to light up the whole bar and not just the middle. I'm not sure if its just the wiring. But in the pictures of the ones i saw on amazon. The pictures for their tail light shows the whole bar light up for the tail light and it gets brighter for the stop light and the turn signals work the same way. which is independent. Thank you. Great video by the way. tnx

[@silverado123]

nice video. next time hold paper up against the back of the fender and trace on the shape of the fender onto the paper. have a good one

[@satudave3728]

Looks awesome man. Great video 👍👍

[@juangonzalez3034]

That's pretty cool man good job

[@ericfraney7374]

Great mod! Have you seen the Blackmill Fat Bob license plate relocation kit?

[@averageguyantics409]

Just took a peak. Looks sweet, might be able to even get it in there with the LED's

[@Jonathan-L]

Nice neat job!

[@Doubledge]

I bought front blinkers for my Harley and the stock blinkers have 3 wires. But the led blinkers I bought have only 2 wires. They say it’s for my bike. Can I wire the 2 wires up to the one wire and then the other one is for ground? Thanks for your time.

[@averageguyantics409]

The three wires is because your front blinkers also serve as running lights. If you don’t care about running lights then just find the wire that has constant power and tape it off. Use the other power and ground wires to connect the blinkers. If you want to maintain running lights it can be done on a two wire blinker but requires a couple resistors and a couple diodes.

[@Doubledge]

Ok. I’ll look into on how to do that. Never done it before. Thanks for your time.

[@diegoantequera]

Awesome job! Do you have plans for the frontal turn signals too? I think it just make sense all lights be in a retangular led shape, following the headlights style

[@averageguyantics409]

I do actually. I found some really sweet rectangular led’s out of a company in Germany.

[@diegoantequera]

AverageGuyAntics m.ebay.com/itm/NEW-NEW-LED-Fittings-Indicator-Harley-Fat-Bob-from-2018-Chrome-Side-Lights/192314526451?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F192314526451%26rvr_id%3D0&ul_noapp=true&epid=2266074686 Like this one?

[@averageguyantics409]

That’s them.

[@SWhite-hp5xq]

It is pretty cool man

[@garyreynolds562]

Very nice looks great

[@t2miner]

Looks awesome!

[@danieldelgado3947]

Hey bud i was wondering where i could buy a diode for this light its the only part i could not find so my light isnt working as it should be

[@averageguyantics409]

This looks like a decent little kit tinyurl.com/y82dxcx4

[@chrismorris9065]

CIRO will probably have a light for that in a few months.

[@guylydia]

That is really good.

[@alozakk]

Good Work, buddy. Are these rear tires original? they look bigger!

[@averageguyantics409]

Totally stock

[@tarnishhero]

great video. thanks for the help.

[@D1cko888]

The indicator section, is it a red or an amber light? I only ask because I’d like to do a similar thing to one of my bikes but in Australia, the indicator lamps must be amber.

[@averageguyantics409]

It's Amber, heres the exact one I bought tinyurl.com/ycbteogt

[@markdavid801]

Do you think ABS (3D printed) mount would withstand the heat?

[@averageguyantics409]

Should be fine. No real heat to speak off

[@Sn0wdawgz]

Very nice. I like this.

[@srhintz]

Just tape over the tail and trace the fender from the inside.

[@josephhenry5134]

Awesome! What is the length of the LED Tail Light?

[@averageguyantics409]

This is the LED strip I used tinyurl.com/ycbteogt

[@abdulhussain424]

Will this modification void your warranty? Especially cutting odm harness? Just curious

[@noedits5390]

depends on where you are, and your dealership, but generally speaking it will only void your warranty in the case of there being a failure that could reasonably have been caused by your wiring. so for instance if your bike catches fire from an electrical failure of the lighting system, you're up shit creek. if the engine were to seize it would be really hard to justify. if your engine started leaking oil, there's not much they could blame on you

[@phabloagr]

How about your warrant man ?

[@shovel2683]

I'm glad to see you left in your mistakes

[@averageguyantics409]

If I make a mistake I'll always show it. That way hopefully someone else doesn't have to make the same one.

[@Boobtube.]

Plus it proves you are only human. We all make mistakes. Good job with your lighting project.

[@KnuckleRacketMan]

Good Job bro

[@havoc2125]

Awesome job, what type of diode did you use?

[@averageguyantics409]

Honestly I didn't look. I just rummaged my parts bins, but a 1N5399 should work fine.

[@AudriusN]

any 1N5xxx

[@igorcosta1734]

I love fat bob !!!

[@noedits5390]

anyone else wonder why the brake lights are yellow?

[@DavidAdiv]

Pretty awesome

[@kevinward5587]

Good job

[@e_skie2685]

Nice

[@RichDunn]

Instead of the wobbly calipers, why didn't you just put a piece of cardboard against the line you had and then draw around the top of the fender onto the cardboard,; and then cut the cardboard just beneath the line you'd drawn, to give you a perfectly flush fit curved template?

[@mannyguillen3603]

i am not sure why this is not an aftermarket item sold by anybody..

[@barackblows1942]

Check out Custom Dynamics for Breakout LED lighting.

[@Jrsjunkremoval]

Great video but did you just throw that digital caliper?? Cringe!!!

[@averageguyantics409]

Maybe not the gentlest set down, but they weren't thrown. Usually I have the case sitting on my bench but for some reason I left it under. Either way you're right, certainly not the way to treat some expensive calipers.

[@Jrsjunkremoval]

Lol for sure brother. I worked with machinists and that was rule number one at the shop. You can understand. Great job with the install. Looks great!

[@honestacehole6172]

Oh no!!! It’s not from Harley. There goes your warranty

[@silverado123]

with a pencil

[@igorcosta1734]

☻☹