Custom FJ1200. Bleeding the Clutch

  Рет қаралды 10,365

Rider Japan

Rider Japan

Күн бұрын

Пікірлер: 10
@niclaswelander4509
@niclaswelander4509 Жыл бұрын
that bike looks awesome and the sound has alot of caractere
@jameshutchings2061
@jameshutchings2061 2 жыл бұрын
If your losing that much fluid then chances are that the slave cyclinder seals need replacing. This is a common fault with the FJ clutch slave cylinder, easy job to do and the seal kit is around £15 - £20.
@andrewgross7563
@andrewgross7563 2 жыл бұрын
If he makes a video I'd love to see it done, I've rebuilt mine twice and ended up folding it on the second one shearing the rubber off the seal and pissing all my fluid out on the test ride. Now I have to rebuild or replace the front brakes as the pistons got stuck and wouldn't return as I was riding without a clutch lmao. 14k miles, but time and old fluid ruined the poor thing, and I ended up buying another one to ride while I figure it out.
@Kent-ht4xg
@Kent-ht4xg 2 жыл бұрын
This video was exactly what I needed, thank you very much! :)
@reneverheij6938
@reneverheij6938 9 ай бұрын
Also you said the R1 has less clutch leaking problems. Could it be that's not because of a better design but because the FJ is on average five years older making the seal in the slave cylinder simply more likely to fail due to age? I'm wondering since some guys in the FJ1200 facebook group advertise aftermarket clutch slave cylinders for 170 euros which apparently have a better design but I don't think the metal part is the problem, just the seal that will need replacing every so many years. So then this upgrade wouldn't be worth the cost and I'd just use clutch rebuild kits. If however there is a design error in the metal parts of the clutch on the FJ the aftermarket kit may be worth it.
@riderjapan1731
@riderjapan1731 9 ай бұрын
Yes i did this plus changed the rubber gasket inside the reservoir and have had no problems since. Thank you!
@curiousottman
@curiousottman 7 ай бұрын
The clutch fluid is DOT 4 brake fluid?
@anthonysmith4618
@anthonysmith4618 2 жыл бұрын
How to put cams on a fj1200
@iangifford6368
@iangifford6368 2 жыл бұрын
With all that dirt in your master cylinder I would be re kitting master and slave cylinders, then you won't be constantly having tonre bleed
@riderjapan1731
@riderjapan1731 2 жыл бұрын
I recently did it! but yes you are right it was dirty in there
Yamaha XJR 1300:-  "Clutch Slave Cylinder Rebuild" ! (With Outtakes)
13:26
FJ1200 Complete engine refresh and rebuilt starter clutch
3:54
Half Fast Fred
Рет қаралды 13 М.
How to Fight a Gross Man 😡
00:19
Alan Chikin Chow
Рет қаралды 17 МЛН
Accompanying my daughter to practice dance is so annoying #funny #cute#comedy
00:17
Funny daughter's daily life
Рет қаралды 20 МЛН
Из какого города смотришь? 😃
00:34
МЯТНАЯ ФАНТА
Рет қаралды 2,6 МЛН
How To Bleed Motorcycle Brakes The Simple Way (NO SPECIAL TOOLS)
13:40
Nick Buchanan Racing
Рет қаралды 437 М.
1986 Yamaha FJ1200 Review - Sound, Specs, Acceleration - The Ultimate Air-Cooled Sportbike!
16:06
Jon's Motorcycle Rescue and Review
Рет қаралды 18 М.
How To Bleed A Hydraulic Motorcycle Clutch | The Shop Manual
5:04
How To Release the Clutch Correctly on a Motorcycle
10:20
Moto Control
Рет қаралды 425 М.
Yamaha fj1200 clutch service check part 1
12:42
Racer RR
Рет қаралды 8 М.
Reverse Bleeding How-To (SOOO EASY!)
8:31
Legit Racecraft
Рет қаралды 24 М.
FJ1200 Starter Motor Removal and Repair
10:21
Rider Japan
Рет қаралды 6 М.
Bleeding a Vmax clutch   HD 1080p
16:42
Kodokuna raida
Рет қаралды 2,6 М.
Yamaha FJ1200 New chain and sprockets
16:59
Andrew On my way
Рет қаралды 2,4 М.
How to Fight a Gross Man 😡
00:19
Alan Chikin Chow
Рет қаралды 17 МЛН