Custom Hotwheels 83 Chevy Silverado Truck

Follow Me on Instagram * Diecast_Customs_164
Thanks to wheelsinc. for the decals & wheels used in this video. Please check out their online shop for more awesome designs
Website: wheelsinc.co.za
Thanks to Organised Pixels for the awesome intro designs. Visit their website for more information regarding any graphic design work.
organisedpixel...
--------------------------------------------------------------------------------------------------------------------------
BASIC TOOLS LIST
DREMEL ROTARY TOOL - www.dremel.com...
HAND PIECE FOR DREMEL (FLEXIBLE SHAFT) - www.dremeleuro...
DREMEL TOOL CHUCK - www.dremel.com...
DREMEL DRILL BITS USED - www.dremeleuro... THE SANDING AND MILLING BITS ARE ALSO AVAILABLE ON DREMEL'S WEBSITE
AIR BRUSH COMPRESSOR - www.alibaba.co...
AIR BRUSH (LOCAL TOOL SHOP) - www.adendorff....
-------------------------------------------------------------
GENERAL TOOLS FOUND AT LOCAL HARDWARE SHOP
SIDE CUTTERS
PLIERS
METAL RULER
CRAFT KNIVES
PAINT BRUSHES
-------------------------------------------------------------
CONSUMABLES
ALTECO A+B EPOXY PUTTY
PAINT STRIPPER
SUPERGLUE GEL
SUPER GLUE LIQUID
SANDING PAPER - GRIT 320 TO 2000
BRAS TUBE FOR WHEELS - FROM LOCAL HOBBY SHOPS
PAINT TAMIYA
THINNERS
OVEN CLEANER TO REMOVE CHROME

[@edimusprime]

I like how you took the time to fill the gap from the saw blade. That's dedication right there

[@diecastcustoms8512]

Thank you. I made a bad cut and the lines looked terrible. I had to fix it for my sanity 😝😝

[@danschopshop7939]

pretty ride....nice work

[@diecastcustoms8512]

Thank you😁

[@davidneilson3508]

Awesome custom build 👍👍😊

[@diecastcustoms8512]

Thank you😁

[@customwheelsdiecast]

superb work man. super quality finish on the truck

[@diecastcustoms8512]

Thank you😁🤘

[@MetalMania3DTV-TAS-AUS]

Mad looking ride gr8 job mate cheers KC Tassie 🇦🇺👍😎👊🇦🇺

[@diecastcustoms8512]

Thank you brother🍻

[@MetalMania3DTV-TAS-AUS]

@@diecastcustoms8512 my pleasure cheers 🍺🍻🥂👍😎🇦🇺

[@MidIslandCustomDiecast]

Sick looking custom. Love the engine.

[@diecastcustoms8512]

Thank you😁🤘

[@nucollector5597]

So clean love this build🤙🏽

[@diecastcustoms8512]

Thank you😁🤘

[@vincevince7168]

I like 👍 , just the black colors i don't like but just grey with the red ink is just perfect for me 😁 , i see the red Candy 😊 , again a great job with the engine and the capot in french 😊 , sorry for the capot , i don't writting with Google translate , i'm on the phone , but good job again 👍

[@diecastcustoms8512]

Thank you VV. You must see the car in the sun. The black really pops of. I will send you a pm on Instagram. She was a difficult car to paint. Capot is a hood or bonnet in english😝 now I also learned some new words😁🤘

[@vincevince7168]

@@diecastcustoms8512 😁 , thanks for the bonnet or hood 👍 , yes it's true that in the sun the painting doesn't have the same reflection , you want other French word ? Hayon , pare-chocs , jantes , échappement , good translation 😁😉

[@shortersdiecast4130]

Wow, she turned out beautiful. Love those old square body Chevys. Especially love the engine and the wheels. Awesome job with this one my friend. Hope you and your family are doing well, everything is going well over here. Thanks for sharing, take care and stay safe my friend.

[@diecastcustoms8512]

Hi G. Thank you my friend. I'm glad to hear everything is good your side. Stay safe my friend. When are you doing another custom for us?

[@shortersdiecast4130]

@@diecastcustoms8512 I was hoping to have one done for the Three blind mice 56 Flashsider invitational but my casting got lost during the process of moving to another house. So hopefully soon I will be able to post something. But until then I will be looking forward to seeing your next video. Take care my friend.

[@coupdegraceidn6361]

As usual you did a Goood jooobbb ! Big love from Indonesia!

[@diecastcustoms8512]

Thank you. I appreciate it😁🤘

[@neilcummings9939]

that is beyond insane. the hood opening tips were awesome. you did an amazing job and taught me a thing or 2. thx nice job

[@diecastcustoms8512]

Thank you😁 I am glad the tips can help a bit. Thank you for watching.

[@michaelescandon2600]

WOW! Awesome like always love that two tone color! Thanks for a great video! Stay safe 👍

[@diecastcustoms8512]

Thank you M!! You have too se her 8n the sun. I wish I had beter camera setup to show you guys. Stay safe my friend

[@Knasterman]

nice job.....

[@diecastcustoms8512]

Thank you😁

[@carlosdelgado614]

Awesome awesome job my friend

[@diecastcustoms8512]

Thank you😁🤘

[@earlware4322]

Awesome custom truck sir! I love all the details (at least those that you showed in this short 10min video) that you did to this one. The way this bed is from HW, seems to be a great opportunity to show off a detailed rear diff/suspension. Maybe a lowrider with custom rear end, or a drag truck...🤔 Anyway, love what you did with it, awesome job!! Thanks for sharing, stay safe and keep on keeping on!!

[@diecastcustoms8512]

Hi Earl. Thank you my friend. I try to keep the videos shorter since most poeple just skip to the end of the video if the video is to long. KZbin have alot of algorithms and if poeple skip to the end they assume the quality of the video is bad. I puts me in a bad situation since I want them to make the videos more accessible. I agree, The casting is really nice to work with. It is almost difficult since it is already so nice😝 Stay safe my friend. Till next time🍻

[@marcelubber]

Love that after Market Grill. Also Red fits nice..but At 10:29 I see a little Problem on the hood 😏 Well done anyways

[@diecastcustoms8512]

Haha. Jip. I ran out of time and assembled car before the clear coat was 100% dry. As I was about to film I dropped him and the hood went completely skew. I didnt want to bend it further. I was scared I ruin it😭😭😭

[@diecastcustoms8512]

I will fix it before it goes to the collection😁

[@saschagoretzki5504]

WHOOP! WHOOP!!!! Great man! Do you use a 3D Printer for the engine and the front grill?

[@diecastcustoms8512]

Haha. Thank you. Yes sometimes i do my own engines. But for this build I used a engine and grill for this build was designed by wheelsinc.co.za. it came out pretty awesome.

[@diecastcustoms8512]

The grill on the original silverado needed some love😝

[@GMO--ge4ir]

Woulda been nice to see ALL the work bein' done.

[@diecastcustoms8512]

Thank you. The video gets a bit too long. I try to show the most critical parts. I tend to show more if I do less to the car. But I do understand 👌

[@earlware4322]

Yeah, I agree. Would have loved to see the engine being made or if you had done anything to the interior. 😞 I am sure your fans would watch a 15~20 video if it had all of your detailed creativity in it. I know that I definitely would.

[@johnrodriguez489]

Niceeee

[@skyexclusive9930]

1

[@diecastcustoms8512]

Congratulations 😁

[@naminazakii]

Comments first dude .. great work 👏

[@diecastcustoms8512]

Thank you😁

[@lIIllIlIIIlIlllIIlI]

do a mclaren senna

[@StashJunkie]

Nice... how'd you change the color of the windows???

[@diecastcustoms8512]

Hi. I normally tiny them to a dark colour. There are nothing you can do to get rid of the yellow. In this case I cheated a bit. I messed up the window by cutting out the side windows and in the process messed it up. I managed to get a play worn Silverado and I stole his window😬🤘😁

[@diecastcustoms8512]

Tint*

[@itzelc2462]

Do you custom build? Or sell ?