*My new awesome gas tank **kzbin.info/www/bejne/eX3VfamsobtkaM0** Don't forget to subscribe, I'll upload soon one more great paint job*
@silkboxing44543 жыл бұрын
Incredible Work. Mad Skills. What paint are you using Bud ? SUBSCRIBED
@Z11KUSTOM3 жыл бұрын
@@silkboxing4454 thanks for subscribing man, here I use ordinary car paint, it's non-metallic nitro paint
@ncstonecrew3 жыл бұрын
Watched it again for the 5th time. This guy doesn’t need a two stage airbrush. Basic badger single, hit the trigger paint/air, boom at once. Knows his gun, paint consistency, air pressure. Results are PERFECT!!! ✨
@Z11KUSTOM3 жыл бұрын
Thanks a lot bro🤝
@westcoastrider30083 жыл бұрын
I love watching you do paint work! I'm still learning techniques and layering. I paint model cars for my practice, once I'm ready ill go to work on my "ready for paint" flat black Harley Davidson.
@Z11KUSTOM3 жыл бұрын
Thanks man! Just do it and I'm sure you will succeed
@tarmac2454 жыл бұрын
Wow. Extra good.
@Z11KUSTOM4 жыл бұрын
Thank you man!
@bradwarner494 Жыл бұрын
Mannnnnnnnnnnnnn you killed that!!! Absolutely beautiful
@Z11KUSTOM Жыл бұрын
Thank you bro!!
@marcuspaniagua72404 жыл бұрын
So sick man!!!
@Z11KUSTOM4 жыл бұрын
Thank you bro!
@agallegoscooltipsntricks Жыл бұрын
excellent. thanks for the cool tips
@Z11KUSTOM Жыл бұрын
Thank you!
@maxwellgreenfield41173 жыл бұрын
that's sick! reminds me of a crustacean.
@Maclaud453 жыл бұрын
Отлично получилось, ещё флейки добавить и ваше супер!
@Z11KUSTOM3 жыл бұрын
Спасибо!
@Vladoz114 жыл бұрын
why it's so dazzling, so shine, it's unbelievable
@Z11KUSTOM4 жыл бұрын
Thanks I tried my best
@ClasssicAri3 жыл бұрын
An artist at work
@Z11KUSTOM3 жыл бұрын
🙏
@neightzindustries4 жыл бұрын
thats so awesome. the clear was so smooth and clean.
@Z11KUSTOM4 жыл бұрын
thanks, yup, I like it too
@neightzindustries4 жыл бұрын
@@Z11KUSTOM i wish i could make mine that clean too. Always having problems with my clear. 😂
@Z11KUSTOM4 жыл бұрын
@@neightzindustries I also do not always do everything perfectly, but I strive for it)
@tarmac2454 жыл бұрын
Had another look. You are very clever with your designs.
@Z11KUSTOM4 жыл бұрын
Thank mate, I appreciate the feedback 🤝
@jdsimons32222 жыл бұрын
Super helpful! I've thrown my metal flake on the tins, looking to add some interest and you've shown me how!
@Z11KUSTOM2 жыл бұрын
Thanks bro! Glad you found it helpful. With flakes, everything looks much better!
@silkboxing44543 жыл бұрын
Mad Skills. Raw Talent.
@kentdixon57163 жыл бұрын
That looks amazing! wish you could paint my car!
@Z11KUSTOM3 жыл бұрын
Mate.. thanks a lot! Your car is awesome, really, but I am too far
@lonesometinman31473 жыл бұрын
I'm gonna try it but I have to find a place to buy patience first. Excellent job my friend.
@Z11KUSTOM3 жыл бұрын
Thanks a million. Yes, of course you need to try, I'm sure you can do something like that
@NicMac4 жыл бұрын
Woah! Love seeing this!!! Great result!
@Z11KUSTOM4 жыл бұрын
Thank you!! I appreciate it!
@highvolts66203 жыл бұрын
Wow....just Wow. Your one hell of an artist. Great design and colors. Thanks for showing your talent.👍
@Z11KUSTOM3 жыл бұрын
Hi bro! Thank you, I am very pleased to read that, thanks for the feedback, I appreciate it 🤝✌️
@garethjones6320 Жыл бұрын
Beautiful work 👌
@Z11KUSTOM Жыл бұрын
Thanks
@mohammadrasoulfard-habibi30663 жыл бұрын
Holy fuck, that's brilliant. Great job mate.
@Z11KUSTOM3 жыл бұрын
Thanks, man, thanks for support, I appreciate it!
@ncstonecrew3 жыл бұрын
Like a jewel.
@Z11KUSTOM3 жыл бұрын
Thanks!
@zizipainting3 жыл бұрын
Beautyfull gastank😍
@Z11KUSTOM3 жыл бұрын
Thanks Bro 🤝😃
@GUE5TPA553 жыл бұрын
I'm only hear for the chill beats.....
@Z11KUSTOM3 жыл бұрын
Welcome!
@jamiepalzeaird30133 жыл бұрын
Yep that was awesome 🤘
@Z11KUSTOM3 жыл бұрын
Thanks 💪🏻🤝
@BrusHstroKeZ4 жыл бұрын
Nice job man!
@Z11KUSTOM4 жыл бұрын
Thanks!!
@ekimandersom44783 жыл бұрын
I love this one
@joaoxufre92963 жыл бұрын
Love the design and the colours great job 👍
@Z11KUSTOM3 жыл бұрын
Thanks man!
@johnsmith-qz4bv3 жыл бұрын
nice work looks awesome
@Z11KUSTOM3 жыл бұрын
Man, thanks for support, I appreciate it
@lloydschultz87483 жыл бұрын
That is wild. Nice work
@Z11KUSTOM3 жыл бұрын
Bro, thanks for feedback!
@EZrider13 жыл бұрын
Nice work man. Very clean lines and smooth shading!
@Z11KUSTOM3 жыл бұрын
Thanks man 🤝 I appreciate it!!
@ChadwickRider3 жыл бұрын
Really nice work!!! Keep it up buddy!
@Z11KUSTOM3 жыл бұрын
Thanks a lot, Bro!
@Z11KUSTOM4 жыл бұрын
*Don't forget to subscribe, I'll upload soon one more great paint job. Another my awesome gas tank **kzbin.info/www/bejne/Y3WxZpR6dsuFqKM*
@chrisferguson19113 жыл бұрын
Could a sworn the title said something about SIMPLE.🤯Magnificent paint job sir!🇺🇸👍🇺🇸
@Z11KUSTOM3 жыл бұрын
Chris, thanks a lot man. I appreciate that 🤝✌🏻
@raullopez62822 жыл бұрын
Eres un genio!
@Z11KUSTOM2 жыл бұрын
¡Muchas gracias! ¡Aprecio tu apoyo!
@rothhuge50764 жыл бұрын
Great job, no doubt
@Z11KUSTOM4 жыл бұрын
Thnx
@veronikalugitsch3 жыл бұрын
10:14 i like the backyard
@Z11KUSTOM3 жыл бұрын
:)
@anthonysantos3629 Жыл бұрын
That is SO. FUCKING. CLEAN!!!!🤌🏼🤌🏼🤌🏼
@Z11KUSTOM Жыл бұрын
Thanks! 🙏
@MrSWUSH3 жыл бұрын
Great Job! Looks like u have good adhesion...what kind of paints are you using?
@Z11KUSTOM3 жыл бұрын
thank you man! it's ordinary cheap auto paint, nitro paint
@210cuervo63 жыл бұрын
Badass carnal how long you been at it? Where you from? I’m in 210 Texas
@Z11KUSTOM3 жыл бұрын
Hi Bro, thanks a lot! I've been doing this for about 10 years. Texas.. Yes, I know, I was some years ago at Houston
@robertrodriguez24123 жыл бұрын
Man that is some talent! Looks nice! Where are you located?
@Z11KUSTOM3 жыл бұрын
Thanks a lot, your feedback means a lot to me🤝
@Gotfaz Жыл бұрын
How long does the base coat need to cure before you can lay down pin stripe tape?
@Z11KUSTOM Жыл бұрын
At the right temperature a few minutes are enough, in general I start 10-15 minutes after painting
@PFDarkside7 ай бұрын
Is the orange opaque? Thinned?
@Z11KUSTOM7 ай бұрын
Yes opaque
@chrisberard69229 ай бұрын
What was this orange paint you used? Was it candy or transparent?
@Z11KUSTOM9 ай бұрын
It's not candy paint
@koltonkrohn73213 жыл бұрын
If you don't mind me asking, what kind of tape are you using? I've been using JTape, but I'm having constant problems with it living in tight curves. Thanks in advance!
@druedudley78703 жыл бұрын
You’re stretching your tape too tightly. When your laying your lines don’t pull on your tape just let it lay down naturally.
@Z11KUSTOM3 жыл бұрын
Hi! In this video, I am using the tape "EMM Colad". I too have sometimes problems with tight curves, therefore in such places, I press, smooth the tape several times. Sometimes, if I do a long break for some hours, I fix such places with wide tape, which I remove when I resume work
@shitindawoodsbear59563 жыл бұрын
I dig it
@Z11KUSTOM3 жыл бұрын
👍🏻🔥
@Yuhmuthasaho3 жыл бұрын
Daaaamn. Come paint my 20’ Vegas hydrostream
@Z11KUSTOM3 жыл бұрын
Thanks man that would be great but...
@Z11KUSTOM3 жыл бұрын
I live so far from you
@Yuhmuthasaho3 жыл бұрын
@@Z11KUSTOM Minnesota is great in the summer
@Z11KUSTOM3 жыл бұрын
@@Yuhmuthasaho )) I had no doubt
@adams13f6 ай бұрын
Did you sand at all?
@Z11KUSTOM5 ай бұрын
After clear coat? I didn't
@frogmanpipes95613 жыл бұрын
I'm new to painting. I've done a few little projects. Mostly just for artistic display. Do you ever sand before clear? But after grafix?
@Z11KUSTOM3 жыл бұрын
Hi, I always sand the primer to make the surface as smooth as possible. Before I start painting. And I also sand sometimes a clear coat, when it needs.
@Z11KUSTOM3 жыл бұрын
here kzbin.info/www/bejne/pX_ZqoyImpuEZ7c some info about that
@ernestojracaso34702 жыл бұрын
Whats name of tape did you use?
@Z11KUSTOM2 жыл бұрын
Man now I use JETA PRO tape
@ПетрЧерных-к9и4 жыл бұрын
Класные работы все
@realitylicker3 жыл бұрын
No gloves? I thought hand or finger oils would hurt the paint surface prior to spraying colours.
@Z11KUSTOM3 жыл бұрын
Hi bro! Yes, of course, you are right. It's advisable to work in gloves. But I'm not comfortable with them. In process of painting I degrease my hands very often, it's just not in the video
@Garagepowers Жыл бұрын
Привет!) зачет получается 💪А знаешь прикол с переводом картинки???
@Z11KUSTOM Жыл бұрын
Privet, spasibo, net
@AtharvaPawar-bo3cf3 жыл бұрын
What is that green adhesive tape called?
@Z11KUSTOM3 жыл бұрын
Hi! It's contour tape, line vinyl tape for painting
@AE-kq4wr4 жыл бұрын
Awesome job, thanks for sharing! How much time did you spend on this tank? 2-3 days?
@Z11KUSTOM4 жыл бұрын
Thank you, yes 3 days
@alfredozapata76633 жыл бұрын
What size air compressor do you use?
@Z11KUSTOM3 жыл бұрын
capacity of compressor - 50L, power - 1.5 kwt
@Kravchik263 жыл бұрын
Круто! Это со старого ижа бак? У меня на 56м такой же)))
@Z11KUSTOM3 жыл бұрын
Thanks, yup 👍🏻👍🏻
@Kravchik263 жыл бұрын
@@Z11KUSTOM круто. Теперь я обязан попробовать покрасить свой))) спасибо
@skamirul28514 жыл бұрын
Nyc
@Z11KUSTOM4 жыл бұрын
I am sorry.. What?
@Smallworldcycles3 жыл бұрын
How long are you letting the paint flash before taping?
@Z11KUSTOM3 жыл бұрын
In different ways, about 20-30 minutes
@Z11KUSTOM3 жыл бұрын
It all depends on the temperature in the workshop
@Smallworldcycles3 жыл бұрын
Appreciate it. Working on a project in the garage trying to figure out my strategy before I start.
@Z11KUSTOM3 жыл бұрын
Yes, that correct, just do it and I'm sure you will succeed 🤘🏻
@francismalang69653 жыл бұрын
What type of tape is that?
@Z11KUSTOM3 жыл бұрын
Hi bro! It's special contour tape, line vinyl tape. In this video I use 3M tape
@ywy2234 жыл бұрын
how many time to stick the line tape after painting white?
@Z11KUSTOM4 жыл бұрын
Hi! I can't say for sure, since in general, I was working on the tank for about 1-2 hours a day. And I didn't count the time. I think about 6-8 hours generally
@ywy2234 жыл бұрын
@@Z11KUSTOM thanks ! your works very wonderful. i'll often Come to see your masterpiece! 👍
@Z11KUSTOM4 жыл бұрын
@@ywy223 Thank you, friend, I really appreciate it