Custom Pen Making for Beginners- Making the Section

Thanks for watching!
Here are the specs as well as links to all the products!
Specs for the section:
Section measurements
30mm long
7.6 threads with 23 mm for front section
Drill bits
9/32 through the body
5/16 for 13.15mm deep
21/64 for 2.3mm deep
3/8 bit for 1.25 mm deep
Cap and body specs from the last video:
Blank sections were cut to these lengths:
Cap 3.42”
Body 4”
Section 1.75”
For the Cap:
12.2mm drill bit drilled 58mm deep
M13 tap
For the body:
9mm drill bit 73 mm deep
Cap threads on the body m13
Section threads on the body (for the section) M10x1
Links to products shown:
Top Choice Blanks:
www.turnerswar...
Drill Chuck:
www.turnerswar...
Drill bits:
www.turnerswar...
Niche System:
www.turnerswar...
Tap and Die:
www.turnerswar...
Tenon Cutter:
www.turnerswar...
Collet Chuck:
www.turnerswar...
Center Drills:
www.turnerswar...
Easy Wood Tools:
www.turnerswar...
Record Power Regent Lathe:
www.turnerswar...