Custom Unequal length headers | 1996 Toyota Camry

[@Jeremy_Hill_2020]

Imagine thinking its a Subaru until this Camry pulls up sounding exactly like a subaru lol

[@morgan123poirier]

Haha exactly! That’s the whole point of building these

[@Jeremy_Hill_2020]

@@morgan123poirier I have a '96 Corolla 1.8 & just recently found headers on ebay (the whole kit with the gaskets, etc) & now want to get custom made headers & make my corolla sound like a subaru lol also I want what a V engine (6, 8, etc) would sound like with UEL headers

[@sleeper.simulant7327]

6 cylinders with UEL’s sound like garbage, the pontiac/GM 3800 in the late 90’s early 2000’s have UEL’s and sound like absolute trash, especially when compared to the ZZP equalizer setup…

[@muaythai193]

@@sleeper.simulant7327 an inline-5 would sound great. cylinder 1 long, 2 short, 3 long, 4 short and 5 short (numbers are firing order). that way you'd get 1-0-1-0-0, which should sound a little like a v-twin with 45 to 52 degree angle and single crank pin.

[@sleeper.simulant7327]

@@muaythai193 wouldn’t sound as good as an i5 with a proper header setup. Low RPM burble that turns to banshee howl at high RPM

[@muaythai193]

I wish manufacturers would use a setup like that on semi-sporty cars like hot hatches or compact sedans. Adds character for sure. 🤷‍♂️

[@ReeshaRacing]

mazdaspeed 6

[@3xeplodng_3agle_studios]

Bad for performance usually. Or rather, not quite as good as equal length.

[@projectyotato]

Been waiting for someone to actually do this, been told in the Camry community that it'll sound just like a subaru, but I've also read that unequal length headers are not good for power, compared to a 4-2-1 header like I've got. And at only 135 hp, not many people will opt for something that will lead to less lol! Sounds awesome.

[@smartfeller1495]

yea they lose a little horsepower but usually pick up a little bit of torque...

[@supremeky5916]

where did you order the headers. looking for one for my 1998 2.2 L , not many options . i want something to give better flow then m y old one . and i dont want a normal oem one .

[@static_Tricolor_camry]

This is sick. Finally a solution to make 4 Bangers Toyota's sound good. This is what I'm going to do, I currently have my reasonator deleted I'm running a Megan SN1 muffler at the back.

[@RedVine6]

I just bought a 98 Corolla VE with the 5 speed. Totally tempted to to take the whole stock system off to preserve it incase I sell, and make a set up similar to this. My other car in a JDM Legacy GT-B, so I love the rumble.

[@insertnamehere34944]

This sounds SICK! Wish I were local and had the cash, I'd totally pay for a UEL stainless header mock-up for my AE92 sedan!

[@DEADPEDAL]

I'm about to make a set of UELs for my '95 Ranger. Can't freaking wait.

[@Jeremy_Hill_2020]

didn't know the mid 90s Ranger has a UEL header option 👀

[@possiblycrazy442]

I already have a cammed V8, but my '01 Camry daily needs this so badly.

[@Enok-ke6kc]

We need more fabs in this world sounds awesome

[@SilverLightningXV]

I wish the aftermarket for Camrys was as abundant as it is for Accords

[@HighLife233]

You would be shocked, but ive been an accord owner and tbh you dont get much after market parts for the engines mostly other parts. I see it being Civics and certain acura cars that get the most rep for their after market availability

[@laurapoirier741]

You guys are awesome.... Your neighbors will be happier 💙

[@ItsPainnz]

dude this is huge.................... better than grand marquis/vic imo

[@Jeremy_Hill_2020]

Now I wish I can find a shop that can make custom UEL headers for my '96 corolla lol

[@victorromero4572]

Dope! So much better than regular raspy sound on equal length headers

[@AssTroll]

I have an 06 subaru legacy gt which they call the businessmans sti and have modded it and definitely has this kinda sound. Now my 02 outback 2.5 has non uel on it and am about to put some inpreza uel headers on it to make it sound mire subie lmao. I actually used to have a black 96 camry like this and a 91 celica st before it and both were amazingly reliable vehicles but my outback is one I can trust to take me anywhere and being that both my subies are manuals makes it even better. The outback may not be fast but is definitely fun. 👌🏽

[@lowkeydiegoduran4724]

Lol my friend has an 06 3.0r legacy wagon, he swapped a manual into it, and one aftermarket exhaust later, sounds like a porshe babbbyyyy, it's hilarious to see people whip their head around trying to find the car making the eargasmig sound and expecting a super car and see a family wagon that has no business sounding that good lol

[@SteelEagle]

Lol this is awesome. I have a uel header on my 2009 and its so much fun

[@FTW56]

Where do you get this done? I want to get this done on my 07 accord with a 2.4L I4 but the only issue is that the exhaust manifold is on the rear side of the engine not expose on the front like the camry in this video. Do you think I can get this header made from an exhaust shop?

[@huntermiller8401]

Ok this is probably a random question, but how much would I have to pay you for you to make me that exact type!?! Really love it and can’t find anything like it

[@evanrosario]

My brother just subaured his out with all my spare parts. Roof scoop wing and lift kit and it looks like a first gen. Makes Subarus look twice. Header coming next

[@rgnico8434]

Do you know where I can get some headers for my 1996 Toyota Camry V6 3.0 LE?

[@toyotabrony]

@MorganPoirior Is it a cat less UEL header? Sounds so good. I would still go for cat in it. By using a universal magma flow high flow cat.

[@morgan123poirier]

Yes it’s cat less

[@toyotabrony]

@@morgan123poirier that makes total sense. Because putting custom UEL header, no cats, even with vibrant performance ultra quiet resonator, without the cat it’s still loud. With cats it helps not only for reduce sound, but also helps clean those exhaust gases. That’s correct?

[@vitark1544]

Anyone has any idea how much longer 2 of the tubes need to be for the headers to make this sound?

[@richrollinhood]

All it needs is a muffler, intake, wheels and coilovers and it be dope.

[@jweatherly26]

ik imo it sounds cheezy af, i love it but there needs to be more expirimenting like this, what if all 4 were un-equel length? how many different sounds can you get from the same engine?

[@Drunken_Hamster]

If you calculated it right, you could make a "crossplane" header that would time the pulses to sound like a V8 or Yamaha crossplane R1. TBH, I wanna see a UEL made where the center two are paired (same length as each other) but longer than the outer two (that are also paired and the same length as each other) or vice versa.

[@Hoft236]

​@@Drunken_Hamster: UEL header paired 1-4 / 2-3: kzbin.info/www/bejne/rmaznZVmncp8oKssi=W1QyToSzZqGzzyrj

[@Commando484z]

​@@Drunken_Hamsterdo you know if someone has ever made that ?

[@Drunken_Hamster]

@@Commando484z I keep checking, and so far, nope. Nobody has done that "crossplane header" and only one guy did the even pulse UEL, but he made the ratio between the pairs WAY too long, so it sounded super weird, then the car he did it on had a total engine failure before he could actually put any load on it and do a proper pull.

[@TheMagicBambi]

Don't happen to have a link to where you got the headers originally?

[@kw2519]

I’ve been wanting to do this for years

[@Drunken_Hamster]

I wish someone would do UELs where either the 1-4 or 2-3 pair are longer.

[@WebNstyne]

Sounds great!

[@edallenpenganon2663]

3sfe engine? Where did u buy the headers?

[@Euroflynetworks]

This is hilarious 🤣 but awesome!!!

[@alpzerlaken]

Imagine this would sound good on my 1994 Toyota Celica GT. I hope it doesn’t lose HP though

[@eriksims9191]

22re?

[@kennethporst1738]

WHAT 😍🤩

[@AVSCDvideoproduction]

Nice, I have 4-2-1 header on mine

[@loaded.357]

Where you get them ..I'm buying a low mileage 96 camery with the 4cyl and want to do header and full exhaust...no catalytic tho

[@AVSCDvideoproduction]

@@loaded.357 they were already on my Camry when I bought it so no idea. Recently removed it though

[@rowanprice7064]

Lemme get those headers, I’ll buy em

[@AVSCDvideoproduction]

@@rowanprice7064 shoot me a message if youre still interested

[@hashslingingslasher6078]

any way to do this to a 2000 camry? i already have a muffler delete that sounds really good

[@tinuthomas531]

You can do this to any 4 cylinder, you just need to make the headers unequal. That’s what gives the sound. You need to have them fabricated or possibly look for ones online.

[@BryceGotwalt]

Would a muffler shop do it?

[@relleck2036]

Sounds mean asf, sounds better than a subie lol. I'd love to have one of these headers for my 88 celica, Id pay you a couple hundred bucks for one lol

[@damiensarmoury3014]

I'm trying to get uel on my 02 alero

[@smartfeller1495]

I liked it more without the resonator...

[@rolandocrisostomo2003]

That model Camry is indestructible. Change the oil and do the timing belt and it will last pass 400k.

[@scarbourgeoisie]

Two resonators out the back and I'm sure it would be pure Suby.

[@nathanmajdanski2406]

I want these but for a 2.7 tacoma

[@toyotabrony]

Funny. The Tacoma’s 2.7L 2TR had a factory header. And mimics as UEL header. And it sounds really good

[@BigKandRtv]

I like it.

[@dustinfurman4045]

Sounds like a predator engine

[@michaelsavvas974]

Dog pls make me a set for my 92 Celica same engine

[@martinfixed]

are they for sale? lol

[@morgan123poirier]

Unfortunately they are not

[@miatalife94]

Do the roar

[@nathangaul2188]

Bros gonna make subi owners think he engine swapped a subie engine in it

[@theNillaLenape]

Sounds more like a flatty than a flatty.

[@amazonbox1115]

i need uel for my cruze haha

[@kenxiong6830]

Whhhhhhhhyyyyy?!! Lol

[@nickkrenn891]

Lol. Sick.

[@Powersproductions130]

lol that was hilarious I heard “don’t click out of the vide- as I was clicking out of it. 😂😂😂 A Camry shouldn’t sound like that. I don’t like it.

[@TE_53349]

Automatic transmission ruins it for me

[@alexkills]

Subaru Camry or Toyota Impreza 🤔