Customize Your Gear with Avery® Dark Fabric Transfers

Kick things up a notch at all your special events by creating custom gear with Avery Dark Fabric Transfers. Also available for light fabrics and stretchable fabrics, Avery fabric transfers are a fun, easy way to customize T-shirts, bags or hats for sports teams, fundraisers, birthday parties and more. They're great for team-building events, birthday parties, sporting events and more.
To find the right fabric transfer for your project, visit: www.avery.com/transfers

[@mauricoperez]

After you use 4 papers and a lot of printed sheets finally get a good result! .. it is not easy to especially print the right paper! .. so prepared to spend a good sheet while you get it..

[@donnajaecksch7399]

this says to print my design normally the way I want it to appear , but the design site says it will automatically flip it. what do I do to get my text toprint right?

[@lisac6652]

Can you take the dark heat transfer paper and use it on a light fabric??

[@ericagdesigns]

What temp would you recommend if using a heat press versus an iron

[@AveryProducts]

Hi Erica, The cotton setting on an iron is equivalent to about 200°C / 390 °F. ^Julie

[@caitlinshin2291]

Is it required to wash the tshirt before wearing?

[@hvega7997]

No

[@brendabradley6215]

I tried it and the paper didn’t want to peel off. It left a thin layer of paper so naturally it didn’t stick. And what if you are wanting to do words or a project that has more than one image? They need to come up with some kind of transfer paper. Vinyl is very thin.

[@AveryProducts]

Hi Brenda, if you are having trouble please feel free to reach out to Avery.com/help

[@brujitacrafty]

I have a sealed package from 2016, any idea if it'll hold up? I'm going to attempt to use it today 👍

[@AveryProducts]

Hello, this should be fine! If you have any trouble, feel free to reach out to Avery.com/help

[@geostorm1970]

I'm using a heat press for this great Avery dark t-shirt transfer paper but I'm having a hard time trying to figure out the best time, temperature and pressure settings (light, medium or heavy) As we all know it only has settings to use an iron. I LOVE the texture and I want this done right. Can someone PLEASE help? Thank you.

[@AveryProducts]

Hello, For the dark t-shirt transfers, you'll want to use the following settings: 320 °F/ 160 °C for 30-45 seconds at light to medium pressure. ^Julie

[@geostorm1970]

Thank you SO very much for your advice. Have a great day

[@lestergellineau3295]

hi what should be your print settings for dark print paper

[@amrarodriguez4062]

Ok

[@Fjdegraciap]

Does anyone know what type of ink is recommended for use with Avery sheets?

[@cellyspeaks1062]

Inkjet printer and whatever ink goes with your printer.

[@tbmac1976]

Very basic transfer, pretty much any home desktop printer will work

[@AylaAnjel77]

Anyone know how to change the dimensions on a picture you want to use?

[@AveryProducts]

Hello, feel free to call or chat with our team and they will be happy to assist: Avery.com/help

[@gotchaflow1043]

How much should the temperature be?

[@TheAvgJoeVlog]

As hot at your iron can get is honestly best, no matter the material of shirt, because the transfer requires lots of heart

[@hvega7997]

Yeah but what If I don't want the white background?

[@AveryProducts]

You are free to customize! You can reach out to Avery.com/help if you have any questions and they'll be happy to walk you through the steps.

[@TheAvgJoeVlog]

Pro tip: Check for air pockets and reapply heat to those areas

[@OnlyPunkin8]

Ok but this doesn't show what to do to get the paper in to the printer to begin with. I bought this pack and there are no instructions at all. Nothing. Some of the sheets are shiny and some aren't. I have one sheet of parchment and some other sheets of stuff and I don't know what I'm suppose to do to get this printed out to begin with.

[@AveryProducts]

Hello! If you are having trouble, please feel free to call or chat with our care team and they will be happy to assist: Avery.com/help

[@JustKatie]

How about laser printers?

[@AveryProducts]

Hello! Your product package should indicate if it is intended for laser/inkjet/both printers. If you are having trouble feel free to call or chat with our team at Avery.com/help

[@Jj-bs3ic]

thank god i dont have to flip the image. Also do i have to use the website to print Out a design because i wanna make some DIY anime tshirts

[@AveryProducts]

Hi Jess, you can upload your own designs to Avery Design & Print. Feel free to call or chat with our team and they will be happy to assist: Avery.com/help

[@nemosthebandit]

The transfers don’t hold black well. Against the black t-shirt the printed black looks washed out.

[@juanybarra7361]

What temp do i use with a heat press?

[@AveryProducts]

Hi Juan, here are the heat press temperatures: www.avery.com/help/kb/details.php?name=heat-press-specifications&id=4474e8aa-d39b-11e8-940f-06e32283317a&category=All

[@Cryptidxcutie]

Wait will the back ground be white if I don’t cut out everything properly

[@AveryProducts]

Hello! It should be transparent if you are using a Light fabric transfer. Feel free to call or chat with our team and they'll be happy to assist you: Avery.com/help

[@linjoecat]

This video is great EXCEPT when she shows you how to remove the backing all I see is her hand..This is a good product however, the backing removal process is terrible..It should not be this difficult!

[@AveryProducts]

Hi Linder Lou, Thank you for sharing your feedback. I'm happy to pass this along to my team for future consideration. Thanks, ^Julie

[@xaithomxhx4085]

Facts

[@margaretb-n622]

😂I know this is old! but what was so difficult for you? Its like a sticker, you peel it off. Hope you figured it out way b4 my advice.

[@frankkenney8031]

Avery has taught me everything except how to initiate the Cursor and Font Options for my 8066 Product

[@AveryProducts]

Hi Frank, To change the font in your project, click 'Text' on the left of your screen and select the font drop-down menu to see available fonts. If the font menu is not appearing for you, I recommend clearing your browser cache or trying a different browser. ^Julie

[@MaritzaLinares]

I tried the dark transfer paper, but I couldn't get the job done because it was a small letter logo with transparent background and in that case the trasparent background would appear in white. Lost my money on this paper and I ruined my shirts. Got to buy new shirts and pay for the logos to be printed😡😡😡😡

[@xaithomxhx4085]

Your a dickhead lmfaoooooooooooo

[@dezzy5357]

hey dumbass sounds like ur fault

[@elimitchell6147]

This video Wasn't helpful because i didnt know you had to peel the backing off

[@ohno3622]

47,000 views and 37 likes... riiiiiiight...