Рет қаралды 6,625
How to make a custom PVC sheath for an old knife.
👍 Be a FRIEND CHANNEL member: / canal arte retrÔ ============================== ===================
✅ WATCH ALSO:
👉 Restoring My 60 Year Old Knife: • Restaurando Minha Faca...
👉 Old Tramontina Machete - Changing the Handle: • FACÃO TRAMONTINA ANTIG...
👉 40 Year Old Cleaver Knife Restoration: • Como Restaurar um Cute...
=======================================================
➡️ How I made a Custom PVC Sheath for my old Knife from the collection
In this video I present my version of a custom PVC sheath made from a 100mm diameter white PVC pipe with a wall thickness of 1.8mm.
The knife that receives this sheath is a very old one from my collection, handmade in carbon steel, with a total length of 346mm, blade length of 222mm and thickness of 4.2mm.
This knife is just over 60 years old and has been recently restored, as can be seen in the video here on my channel: • Restaurando Minha Faca...
✅ The finished custom PVC sheath has the following dimensions:
- Overall length: 385mm
- Length of blade guard: 250mm
- Overall width: 85mm
✅ Brass eyelets nº 54 were used for its fixation with the dimensions:
- Larger outer diameter: 10mm
- Hole diameter: 5mm
- Height: 4mm
✅ Screws for fixing the belt loop in carbon steel Ø7/32” 24 f.p.p. with white zinc plated surface coating, slotted round head. Carbon steel nuts and flat washers also have a white zinc plated surface finish.
In this video you saw how to make a custom PVC sheath for an old carbon steel knife from my knife and pocketknives collection.
=======================================================
Big hug to all, with wishing you happiness and success!!!
✅ LIKE - COMMENT - SHARE
👉 SUBSCRIBE and turn on notifications to receive news:
➡️ kzbin.info...