Well, I was here 6 months ago. I've now cut a ton of aluminum with a router, and it's great! (Once you get the right bits.) A spiral bit of HSS is fine. I grabbed a few ¼" (6.25mm) bits for this. The HSS did fine, but the solid carbide, 2 and/or 3 flute bits are magical. One of the other reasons these are so great is that they shave curls rather than rip chunks. So it helps the mess, and keeps a majority of it from becoming aluminum dust. Just make sure you use a good router, (and a good router table) NOT from Harbor Freight. An aluminum cutting bit can be $7 or $170 depending upon type. So buy one around $20 (I prefer CMT bits from Italy as they have really great carbide, creepy sharp edges, and they're easy to clean any aluminum that might be stuck on them. Lastly, and most importantly... DUST COLLECTION!!! Aluminum is one of the worst things to cut as it can be easily breathed in and lodge in sinuses and lungs. Then it's RIP. So use a high quality vac with a hepa style, 1 micron filter. Also, a high quality cartridge mask... not a simple layer of material most ppl use.
@skeezo6 жыл бұрын
Good job on the process, really accentuated the shopping cart look on the car!!
@atowning6 жыл бұрын
I made an Aluminium repair piece for a V pulley on my Atlas pillar drill using a wood working router, I even ended up using a small milling bit with great success, works great!
@Zogg12816 жыл бұрын
It is amazing which of the softer metals can be cut and shaped with wood working tools. Nicely done.
@TheFurriestOne6 жыл бұрын
Wow, wood bit gives surprisingly decent surface finish too! Whoa, no spoiler warning for the end?
@1nvisible12 жыл бұрын
*I am involved in a different racing format, is that a functional vs decorative spoiler? It looks like it probably works.*
@SpecialEDy2 жыл бұрын
@@1nvisible1 It's a wing, not a spoiler.
@eddietowers55956 жыл бұрын
Aluminum was, at one time, considered the “poorman’s oak”. Any and all cutting tools, used in hand or machine tools, used to cut wood can be used to cut and metal, ferrous and non ferrous. So long as the cutting tools are kept sharpened, and honed. Back in the 90’s I turned a full sized solid aluminum bat on a shop smith, using nothing but a broken pipe wrench handle out fitted with a 1/2” Bondhus Allen wrench, shaped in much the same way a lathe cutting tool is shaped. Those were the halcyon days of yore.
@PhysicsAnonymous6 жыл бұрын
That sounds epic!
@thzzzt5 жыл бұрын
Don't grip the torch tight. Use a very light touch. This makes it easier to keep a constant torch travel speed.
@BryceandKyle6 жыл бұрын
Very cool video! Moar efficient downforce! I'll have to make some of these when I get my 280z done.
@MrSleepProductionsInc6 жыл бұрын
I’ve used carbide tipped wood working tools for several aluminum and steel projects on the bridgeport. They work fine and if you need a cutter on the weekend than a run down to the home center will get you up and running again!
@jamespolucha87908 ай бұрын
I’ve been using my wood band saw to cut aluminum and it works fine, even to 1/2 inch plate
@FPChris Жыл бұрын
4:00 use push paddles. Keep you fingers safely above the bit. NEVER wear gloves near power tools.
@A13tech6 жыл бұрын
poor honda, it looks so so ugly :(
@VladekR6 жыл бұрын
And color don't match
@TheTimeDetective424 жыл бұрын
Mods on cars usually are not the greatest ting lol. Thanks for the info about milling aluminium! WOW!
@evaderknives6 жыл бұрын
Hey, we all have to start and learn somehow... I've been trying to do more milling and lathe work in my videos/knives... I haven't tried plasma cutting, but i am trying to learn TIG/MIG welding. I made a horizontal grinder and heat treat oven... The welds look horrendous, but they both work amazing, hahaha... Take it easy..
@jcknight876 жыл бұрын
Keep at it Dave, just takes practice. not that i have to tell you, i just checked out your KZbin channel. you are clearly a motivated guy. Keep up the good work.
@evaderknives6 жыл бұрын
Thanks, that really means a lot..
@ales_xy6 жыл бұрын
It doesn't matter for a couple plates, but If you are going to do lots of aluminum, then use carbide tools. Aluminum itself is very soft, but it has layer of aluminum oxide on it's surface (especially when it's anodized or weathered) and this isn't the best stuff for HSS.
@intjonmiller6 жыл бұрын
xy4648841fd He did.
@tormenmashi_4 жыл бұрын
although it might not look the best on the s2k but at least you made it yourself and put in the effort, I respect that
@arturozarate17524 ай бұрын
Nice job.
@raulacevedo-esteves94935 ай бұрын
They would look nice dyed in anodized black.
@garnerz16 жыл бұрын
Why is watching a router table cut aluminum so soothing?
@JiahaoLin3 жыл бұрын
Lol because aluminium cutting sound is not on
@routercnc95176 жыл бұрын
Cutting a few bits of aluminium with a router bit works fine. I've done that a few times but it will wear them out pretty quick. It's a handy tip if you are building your first CNC router. After that you can use proper carbide bits and let the CNC machine do the work.
@buckhorncortez6 жыл бұрын
The router bits he used had carbide cutting edges. Guess you're not into wood working...
@John_Ridley6 жыл бұрын
Sure looks like a carbide router bit to me.
@PhysicsAnonymous6 жыл бұрын
Yup, both bit used were carbide. Still look and cut like brand new too. I'm sure they will wear out faster then cutting wood, but that's true of all tools.
@routercnc95176 жыл бұрын
Sorry by proper carbide I meant solid carbide with spiral flutes, ideally with 45 degree angles. These will have a shearing action and will last longer. But you needed the bearing guide on the brazed carbide wood routing bits.
@TheRocketSurgeon_116 жыл бұрын
I like this edit, well done!
@AustrianAnarchy6 жыл бұрын
Groovy! Them routers are pretty handy. Adam Carolla used his to bevel a stone countertop.
@Jonzynator3 жыл бұрын
one thing that i highly recommend is using some beeswax when cutting aluminum with wood bits. Hell any bits. it really helps in stopping the aluminum from sticking to the bits.
@feral4mr25 жыл бұрын
wow... wish i had seen this earlier! after just cutting out my new end plates with a bloody jig saw!! haha... love the router idea!
@MrAlekoy6 жыл бұрын
You should have put a spoiler warning in before showing that spoiler.. :P
@thomasdickson353 жыл бұрын
He could have put a spoiler alert at the beginning of the video!
@Dentinvent5 жыл бұрын
Nice video. Good editing and music
@MrVajutza6 жыл бұрын
Good job getting an odd shape cut out nicely, two suggestions, firstly be careful with gloves and spinning tools, I have witnessed that go bad for a co worker. Second tip, use plastic contact film like you would to wrap your school books to protect the mill finish on the Aluminium. Saves you time in getting any scratches out after cutting it out.
@PhysicsAnonymous6 жыл бұрын
I agree on both points. I stopped using the gloves after the first cut after realizing my mistake. Good call on the contact paper. I will have to pick some up.
@John_Ridley6 жыл бұрын
A couple of years ago a student in the Robotics build team was trying to rip some aluminum extrusion on the bandsaw and making a mess of it. I said "cut it on the table saw." He thought I was nuts. I said "Give it here." I set up for the cut, every student in the shop retreated to the far end. Cut through it like butter and left a super nice finish on the cut. I cut aluminum with carbide tipped circular saws a lot. Doesn't bother a thing and works very well. Noisy though, put on the ear hole pluggers.
@PhysicsAnonymous6 жыл бұрын
Good advice. Have you seen the KZbin channel sv seaker? He will even shape aluminum by hand with a table saw. That even makes me nervous
@John_Ridley6 жыл бұрын
yikes. Yeah I don't do anything with a table saw except straight cuts. Table saws require caution.
@rea506 жыл бұрын
What about to adapt plasma cutter in the cnc laser?
I was looking for ways to cut .090 Aluminum and THIS would work... I have a CarveWright Hobby CNC that I can cut the guide from... Even make a 4 leg jig with a center vacuum head that held the aluminum blank needing to be trimmed... Keeping my fingers out of the cutting area for a 2 x 3 inch tag... THANKS !!!
@GoatZilla3 жыл бұрын
spoiler kicked in yo
@DDB1686 жыл бұрын
Nice job
@sid19776 жыл бұрын
Why not if it does work! You could swap laser head to plazma cutter from begining :)
@burlymugg Жыл бұрын
that is some Florida shit right there, great info.
@21thTek4 жыл бұрын
Excelent, You Genius !
@UnitNo.22 жыл бұрын
Dope
@alexmartz2844 Жыл бұрын
do you think a bit like this would work on somehting thicker, like say 1" 6061?
@pro-touringf-body51793 жыл бұрын
a paper template and a band saw would have been done by the time it can be drawn on the computer.
@mrden584 жыл бұрын
looks great. I wonder is there a risk of a bit of swarf falling into the motor?
@AlessioSangalli3 жыл бұрын
Unlikely, the S2000 has it in front
@criggie5 жыл бұрын
I'd anodise the plates and mounting bolts to some darker colour, if possible.
@brianmitchell3056 жыл бұрын
I would of not tried a wood router bit for that but gives me some ideas. Probably never use that bit again. How is the edge after using it? Or one bit and done (with the bit that is)?
@PhysicsAnonymous6 жыл бұрын
The bit looked just like it did when I started, cut just as nice too. I'm sure it will wear out much faster on steel and aluminum, but it should still last for a while.
@nraynaud6 жыл бұрын
two questions: what about chip welding, did you use any lubricant? what about using a roundover instead of a chamfer, to get a little bit into the 21st century?
@PhysicsAnonymous6 жыл бұрын
No problem with chip welding, my guess is the high speed of the router helped with chip evacuation. Also feeding it by hand, I was able to get a good "feel" for speeds and feeds. I think a round over bit would work just as well, though getting the depth right might be a little trickier.
@djwmunro6 жыл бұрын
Candle wax on the bits will stop Aluminum from sticking .
@PaulMurrayCanberra6 жыл бұрын
Or a nice ogee, to take it back to the 17th?
@DominicGiles6 жыл бұрын
Never a fan of the S2000 but with that spoiler it looks ridiculous... But solid work making them.
@azulazules26235 жыл бұрын
To this day he claims that plate added 7 horse power.
@mrpoolplayer63794 жыл бұрын
If nobody tells him, it's a placebo, he won't know.
@ENCXBG15 жыл бұрын
I don't think the issue is with the cutting head. Carbide will go through aluminum no problem. The problem is all the aluminum shavings getting into your exposed router motor and ruining it.
@mathankumar64736 жыл бұрын
Dude hat has happened to the surface grinder project? It has been so long since you give updates about it. Hope to see it in action soon
@PhysicsAnonymous6 жыл бұрын
Sorry man, if I only worked on the surface grinder I would go crazy. The next video will probably be about it though
@JRADMAKES3 жыл бұрын
i need to copy a part that is made of wood that i will me making out of aluminum, this technique will help, except i have a jigsaw and not a plasma cutter
@danielfogli17606 жыл бұрын
Hey man, that's amazing! :-)
@devin45606 жыл бұрын
Nice. Go to all that work to improve aero efficiency with those end plates an destroy the aero with that roll bar creating turbulence.
@PhysicsAnonymous6 жыл бұрын
It actually has a hardtop when on the track. And also this is a track car, so a roll cage is mandatory.
@Todd1616 жыл бұрын
yeah car owner still enjoys it on the street and being in Florida convertibles are nice to cruise around in. simply add the hard top when going to the track, best of both worlds!
@AlessioSangalli3 жыл бұрын
Why not anodize (type2, with dye) the plates?
@MoosesWorkshop6 жыл бұрын
Cool!
@PaulMurrayCanberra6 жыл бұрын
How much downforce does that wing generate? I mean - I wouldn't feel safe sitting on those struts, and that's where all the downforce goes.
@ProfessorOzone2 жыл бұрын
Looks like Florida. Is if?
@carterscustomrods3 жыл бұрын
I'm simply too afraid of damaging my expensive bits, and flat out scared of buying a cheap bit for aluminum.
@DrMackSplackem Жыл бұрын
Try routing titanium sometime and let us know how expensive they look. For me though, routing metal is not too bad on my bits, but most of that is just squaring up pieces, light passes only ofc. For one of those 'dedicated bits'-type jobs, I'd plan on buying extras of a good cheap one or 2 I knew for basic one-off stuff like in the video. As long as you're not wanting to churn out baseboard moldings from 6061 bar stock or something else ridiculous, most of your woodworking bits would likely do just fine with most light metalwork, provided you know what you're doing and don't get in a hurry. Of course, if I had a plasma cutter I wouldn't need to route so much metal in the first place.
@jeff-lindawells77606 жыл бұрын
Where was your ground clamp when plasma cutting?
@intjonmiller6 жыл бұрын
Jeff - Linda Wells The entire table is conductive. Clamp below the surface so it's never in the way.
@poppypuppy53726 жыл бұрын
It's a total waste of time even having that wing on the car. The airflow will be so disturbed that it won't work. Nice machining, but a total waste of time
@transdimensionalist6 жыл бұрын
why because the roofs down?
@exhempknight6 жыл бұрын
Likely because (pure speculation here) the wing is just bolted to the trunk, simply for aesthetics. No real engineering as far as air flow and management with regard to the rest of the car. Further, unless the wing is tied into the frame of the car, any significant downforce produced would buckle the trunk lid like a tin can. Same with the splitter on the front. Likely pure aesthetics. Doesn't look like the support rods are bolted anywhere close to an actual structural part of the car. If it produced real downforce, it would just rip right off the bottom of the bumper. It's his car. If he likes the way it looks, more power to him. I know I dig it.
@wileecoyoti6 жыл бұрын
So I used to do racecar suspension and aero for high speed stability: I don't know much about s2000 flow dynamics specifically but I can tell you that wing is easily in the path and probably not at much reduced pressure. Without knowing more about the angle and shape of the wing I couldn't tell you if the purpose is to create downforce or reduce the cd, but there's no reason it couldn't be for either. It also looks like it's mounted at the seam of the trunk, so even without reenforcement that area could take a few hundred pounds per side. Way more than a wing that size is capable of. I know wing size want limited by his track category too (afraid I didn't recognize the category, haven't been building track cars for a long time) Don't forget that most cars produce lift at the rear in higher speeds, which is less than great in wide corners and an otherwise balanced car.
@gb80146 жыл бұрын
Id love a video on these topics ! Can you make it happen for us ? Pretty please?
@exhempknight6 жыл бұрын
Ryan Wilhelm Hasn't thought about reducing the CD, that's a good point. And now that you point it out, having it mounted over the seams is a clever way to add structure. And while you're correct that most cars get light in the back at speed... I can't help but think he'd benefit more from an air dam in the front, with the splitter much closer to the ground. It seems like it would be easier to keep air from getting under the car, to keep the back end from getting squirrely in long sweeping turns. But I'll obviously defer to greater experience. Thanks for the education!
@dennisgarber3 жыл бұрын
This is the way to go. I am unsure if either my half inch mdf or my 8th inch alminum template would work with a plasma and router and collar. ...Also, I have 20 half inch holes and 12 quarter inch holes, and found it very time consuming with a drill press. First, I would spray paint through the template, then find the center of the hole and mark, then drill the center with a small drill (I got off when I didn't do this step), then drill the half inch holes. I could cut out 3 steps by blasting the center of the hole with the plasma cutter through the template. I am wondering if anyone has tried this with failure or success?
@markklausen81311 ай бұрын
I've always thought spoilers look like a towel bar in a bathroom. They have the same aerodynamic effect, as well.
@Braeden1236987456 жыл бұрын
Will this fit my Honda?
@RexusKing6 жыл бұрын
Does increase efficiency equals to saving fuel?
@aimDiego6 жыл бұрын
I'm thinking more like reducing aerodynamic drag (which results in saving fuel and better performance, in certain cases)
@pen256 жыл бұрын
More downforce means more drag which means less fuel efficiency.
@aimDiego6 жыл бұрын
Phillip Ramirez but wings aren't always about downforce, that depends on how is the wing and its features set up, downforce helps for grip, which causes drag, reducing acceleration and top speeds, on the other hand you could get it set up for better top speed and acceleration, resulting in less downforce and grip.
@John_Ridley6 жыл бұрын
The actual effect is to make your car look crazy awesome to 14 year old boys, and like it's owned by a complete tool to the rest of the population. It also tells the cops who to keep an eye on.
@aimDiego6 жыл бұрын
John Ridley easy to assume, do you know if the guy doesn't do track time? I'm guessing you wouldn't like it if anyone told you a hobby you have makes you look like a tool, but then you would demand respect for what you do, keep your stuff to yourself man.
@madsam75826 жыл бұрын
Two . . . foam turds . . . connected by phone cable . . . yeah that's pretty much the Internet!!!
@brianheaton55213 жыл бұрын
Fucking thing looks like a shopping cart.
@gb80146 жыл бұрын
Hey, nice work, but is that purely for aesthetics? It doesn't make a lot of sense as far as i can tell
@user-qw4wn1zm4e6 жыл бұрын
Hello
@videogalore6 жыл бұрын
Great video as usual, but the subject matter is up for debate! Is the S2000 a rear wheel drive car as a starting point? Secondly, send your friend over to the 'Engineering Explained' channel and look up diffusers, looks to be a better way of getting some serious downforce.
@joemortimer34766 жыл бұрын
Hi
@vomdeich10116 жыл бұрын
The end plates may be efficient - the way producing them wasn't for sure!
@PhysicsAnonymous6 жыл бұрын
To make one set, probably not the most efficient. But for making 10-20, much more efficient then cutting them out by hand.
@vomdeich10116 жыл бұрын
Sorry I didn't watch until the end...
@noobhacker1015 жыл бұрын
Nice clean job but Really!?!?!!? Need more down-force for what!????
@bubbahogg-buga46135 жыл бұрын
the car might fly away without it, seeing its so fast
@SinnerSince19623 жыл бұрын
I admire the workmanship, but it's a little moronic looking on that car.
@YuriyKhovansky Жыл бұрын
Woodglut instructions is nice for that.
@goldwolf06064 жыл бұрын
That spoiler looks tacky... ruined his S2000...
@xConundrumx4 жыл бұрын
Two words : Anno and Dice ... Join them together Lose 1 letter N Change 1 letter C into a letter Z
@maurodinosauro716 жыл бұрын
NO! Please don't try this at home, is too dangerous, you can draw your item and to let cutting it with industrial laser.