Cutting an old shotgun the right way

Рет қаралды 73,467

Күн бұрын

Пікірлер: 53

@williamneal7210 Жыл бұрын

Dang it, you skipped the two parts I was really pumped to see: the actual way you cut the barrel down and the installation of the bead....dang...

@loyalvrazo8679 8 ай бұрын

That’s what I was gonna say. They always show in the movies the hero using a saw of some kind, really wanted to know how it’s actually supposed to be done

@rustyriflefan 2 ай бұрын

I show how to cut parts in another video on my channel. Take a look

@rustyriflefan 2 ай бұрын

I showed the cut down parts in another video of mine. Take a look

@JustFiddlinAround09 Жыл бұрын

Professional gunsmith here (35 years in the business). Not how you do a professional job. If you want to do it the "right" way, instead of using JB Weld to fill the space between the barrels, fit a mild steel filler and soft solder, in place. Also, you need to reinstall the front bead.

@rustyriflefan Жыл бұрын

Thank you for reaching out I knew jb weld was a cheap/ fast fix and I like the idea of mild steel and soft solder in place.

@bareknucklehogdogs 3 ай бұрын

Pretty cool how you turned the barrels fill of metal shavings and abrasive back towards the firing pin and triggers... good work on that..

@KutWrite Жыл бұрын

Wait. The title is "Cutting an old shotgun the right way," but you cut the shotgun off-camera? The title should be "Sanding and bluing an old shotgun the right way."

@rustyriflefan Жыл бұрын

Lol I didn't thing of it that way. But you are right

@darvinpreece601 Жыл бұрын

The few I’ve cut, I made sure they were 18 & 1/2”, or 19”. I actually tested the pattern spread with 7&1/2 shot and 00 shot. It didn’t seem to make any difference. But those lengths make sure you don’t get it too short. Some rulers seem to be short . . .. plus that gives me peace of mind. Just my humble opinion.

@rustyriflefan Жыл бұрын

After reading this I panicked a little and checked it with another tape measure. We are safe it's 18 1/2 in. Interesting about the spread.

@davidkermes376 6 ай бұрын

just don't use a ruler supplied by the atf!

@josephm.androne7284 3 ай бұрын

What did u use to cut it?

@rustyriflefan 2 ай бұрын

A cut off wheel. Or a hacksaw will work.

@amanetbushati165 2 ай бұрын

@@rustyriflefanWhy not a grinder disc??

@royalalloy3471 6 ай бұрын

Dudnt show the cutting

@jerryg2073 6 ай бұрын

The customer's request was very reasonable and legitimate. I have an older Kassnar (by Zabala - Spain) 20ga SXS with 28"barrels (I bought way cheap). Looks exactly like the 'subject' firearm. I am considering cutting barrels to 18.5", re-installing the bead, and do a good job of filling the end gap. WHY? I'm looking for a 'travel gun.' Compact and legal all over, especially when I have family in upstate NY (where laws seem to change by the minute!) and Michigan (where who knows?) - but this is a Joe Biden suggestion for a home defense gun LOL! I am experienced doing these modifications and have several other quality 20ga shotguns - including an Ithaca SKB 100. Why not have a 'legal 18 1/2" package' (broken down) to travel with?

@ashankelein Ай бұрын

Groovy

@Farmboy1989 Жыл бұрын

Why you cut why ????

@thedawg2023 Жыл бұрын

To saw it off😅 lol

@peebay3515 3 ай бұрын

You need to keep the text on for longer, it comes and goes way too fast. I have had to go back and pause really quickly so I can read what the hell you were saying.

@rustyriflefan 3 ай бұрын

Thanks I will do that next video

@fritzk3627 Жыл бұрын

In weld? Nah, silver solder the gaps…

@ЛеванЛевани Жыл бұрын

Для чего Крис вы испортили хороший дробовик?

@SanjayKumar-ce4oe Жыл бұрын

क्या बैरल छोटा करने से इसकी मारक क्षमता कम नहीं हो जायेगा

@jerryg2073 6 ай бұрын

IMHO, generally, no. Most shotshell powder burns within 18". In one test I read, the velocity loss between 18 1/2" and 26" was negligible.

@jamespollard1670 Жыл бұрын

Joe would be proud , lol

@ifly135 Жыл бұрын

Hmmm, misleading title, and crap music. Recipe for another channel to ignore.

@martybrown358 6 ай бұрын

Does anyone recognize make & model ? Chopping up a foreign job is one thing...classic American is another.

@rustyriflefan 6 ай бұрын

It's a Spanish made shotgun

@arnaldorossini7524 5 ай бұрын

@johnking6252 Жыл бұрын

Magic??

@skipwine6123 Жыл бұрын

Nice job and no use to put a front sight back on.

@АндрейГичко-л3з Жыл бұрын

Оторвать руки и собакам отдать..ты испортил ружьё

@travistoor6360 Жыл бұрын

Bet that thing kicks like a mule now

@TheWalterKurtz Жыл бұрын

This is an ATF entrapment.

@jerryg2073 6 ай бұрын

BS!

@marknielsen2482 9 ай бұрын

Why ruin a perfect shot gun

@rustyriflefan 8 ай бұрын

What's what the customer wanted

@martybrown358 6 ай бұрын

The customer can fuck himself.

@80HDFilmz 4 ай бұрын

You probably like polymer guns be quiet

@marknielsen2482 4 ай бұрын

Quite the opposite. I like making gun stocks and rebuilding old guns. Im not into plastic guns although I have 3 with plastic stocks. @ZachsCamClips

@fernandoporrofutrica.254 Жыл бұрын

Como danificar um cano perfeito!😂😂😂😂😂.

@thedawg2023 Жыл бұрын

What do you mean. How are you messing it up

@donnachamcgowan Жыл бұрын

Why Ruin a Shotgun by Cutting.the.barrells ???? its a no no in the.Sporting world .....

@johnnyac2735 Жыл бұрын

If the goal is a home defence weapon, cutting is a great idea. A 24 or more barrel is hard to maneuver in confined space of a hallway, and intruder will be less than 20 feet from you, so one shot will take care of threat.