Cutting Compound Series!!! Menzerna Super Heavy Cut 300 Compound!!!

[@apexdetail85]

Next up .....Britemax!!!

[@mirabalmedia]

-Menzerna 300 removes 1200 grit using a wool pad. And 1500 grit using a heavy cut foam pad. -Menzerna 400 removes 1500 grit using a wool pad. And 2000 grit using a heavy cut foam pad.

[@apexdetail85]

There you go Menzerna fans! 👆🏻

[@tajungkang3602]

How about the pressure when applying it?tds says heavy pressure when applying it with wool pad for rotary

[@daves.3278]

These series are amazing. Your def on my top 3 all time favorite detailers to watch on KZbin forsure!!!

[@apexdetail85]

Thanks! Lots more to come!

[@TheDeafcanadian]

Me too!

[@imrichbitch.1937]

*_I'm getting the popcorn ready for another great show._*

[@louiesalta5114]

shcc300 is a diminishing agglomorates that will cut, polish n finish (3in1 effect) its cut level is 10 (scale 1-10) but finish off with gloss level 6 (scale 1-10) it has an extremely aggressive abrasive content design for very hard clear coat that can remove 1200 sand marks. you can maximize its effect by doing a long buff cycle 4-6 sec passes at medium speed so it will not dust at all. going to high on speed will prematurely break up the abrasives and heat up fast thus creates a dust and hazy finish. recommended to use with a fine wool or microfiber cut pas both on rotary or DA polisher.

[@chrismay1a]

I love the way you do testing like that

[@apexdetail85]

The best way I can come up with on video.

[@MrSulkow1]

Good to know about the 300. I have the 400 and really like it.

[@whitepearlautodetailing4745]

Thanks for the video, really I noticed a better result in cutting & correction than what you got in this test. But I do agree that the major problem of Menzerna 400,300 is the dusting.

[@apexdetail85]

After using it in two corrections... The top three do have slightly better cutting. Yeah... then there is the dusting.

[@whitepearlautodetailing4745]

Apex Detail but still Menzerna is my favorite! 😁

[@richlee509]

Menzerna is the best

[@MrSulkow1]

I got a couple quarts of that Jescar and it is mind blowing! Thanks for the great review!

[@michaelbritton6524]

202 thumbs up!! Keep it going! My fav series....until your next video! Lol! Appreciate you taking time to make all these videos!!!!!!

[@apexdetail85]

Thanks! Lots more to come! Stay tuned!

[@02powertube]

I have tried sonax cutmax and the ex 06-04, I hate both. Sticky and not easy to wipe. Love Meguiars m105, but too dusty. How is the Menzerna 300 compared to Meguiars to wipe off?

[@danlc95]

The Menzerna won't stick to the paint like Meguiar's.

[@MelbourneMobileDetailing]

I find myself using 400 much more then the 300 although each compound has its place.. Great video as always dude 😊

[@madwax1360]

I'm rooting for the Wizard against the heavyweight champs! I always root for the under dog! :)

[@apexdetail85]

Me too!

[@HelmutHarwardt]

I like your video. I was planning on using it to remove oxidation on my gelcoat trailer using a wool pad and a dual action forced rotation polisher or any outh ideas you may have

[@testdirver]

well they say 1200 and up for the results, kind expensive in my country, would you mind recommend another with better price/performance

[@mikeyp2447]

Cant wait to see the head to head action!!

[@apexdetail85]

Should be interesting!

[@1b0b]

Great series of videos. You must try Polish Angel Master Compound It may come under O.O.L.F but its not cheap or carpro clear cut Keep the videos coming cheers

[@KalmarDeZZe]

I use the Nordic Pad - micro wool with Menzerna 300 and it removes the scratches from 800 grit paper.

[@Derricky007]

My favorite and the best cut compound is the Sonax Cutmax. I tried so many different brands, but the Cutmax is for now the best compromise when it comes to a nice cut and a dust and and non oily/swirly surface. Literally you can control your whole work process with it. The Menzerna, i tried it, i expected more flexibility, it produces some respective amount of dust, the surface is harder to wipe clean and it leaves a dull surface which needs some water to be sprayed on and some additional polishing to somehow dilute the creamy mass that it leaves behind. It reminds me on the old 3M cut compound series. I must admit that it has a pretty good cut, no one can deny it. It is really on the same level like Sonax Cutmax in comparison to abrasive properties. At the end of the day the only thing that makes my choice for the Cutmax is the good workflow. The Menzerna promised so much, but the half of it is not achieved in the product. Probably the Menzerna FG 400 is a better choice than the super heavy cut 300, no matter if it has a lower cut power. I never used it, but i saw that it has a better use flexibility than the 300.

[@apexdetail85]

I absolutely cannot do without Cut Max...I do corrections every day and it spoiled me!😃

[@Derricky007]

It`s just my opinion and my experience with it. It`s up to everyone to chose what material is the right for the own needs. In my opinion the heavy cut 300 can not compete with the Cutmax.

[@apexdetail85]

Completely agree.👍

[@ByeEvoX]

Agreed. Also had that experience with 1000. I've found all the menz compounds like to break down fast... too fast, when we're working on hard paint for example. I do however like their polishes. And 400 is solid.

[@herrysapto796]

hi mate, could u tell me between menzerna 1000 vs 300, which is much stronger cutting? thanks mate

[@maxfriedenberger8043]

Another great video Brian..........Great Job!!!!!!!!

[@apexdetail85]

Thanks Max!!!

[@maxfriedenberger8043]

you are welcome my friend!!!!!

[@Fab24hdumans]

Dam!! I should had find your video before doing my Porsche. I used compound 400 ( a bit of gloss) instead of 300, can still see scratches (I am between 1000 and 1500).... wasted my time... video is outstanding sir, clear descriptions of what is going on, you got a new subscriber... Now I am going for Sona X, what do I need to do to remove my failed job and to start on a clean hood? Thank you again for creating this channel, eyes opener!

[@vrodxvrodx]

Never tried it but though it would do better. I very much like the rest of their products.

[@apexdetail85]

I used this line for years...reliable stuff...just not this compound

[@chrismay1a]

is that jescar their correcting compound or a different product? i like their correcting compound

[@apexdetail85]

Absolutely... their correcting compound👍🏻

[@romanescalera7752]

Farécla G3 Cutting Compound & CSI Ceram-X, had a demo on both pf these and they worked pretty damn well compared to megs

[@EllHuron]

Great Video, thank you for your motivation and time!

[@marioskosmidhs9454]

Hello sir very nice video...as i had mentioned before a lot of us products are very expencieve in europe and many europe products to expencive in us.......as excample........... Menzerna 300 we can buy it in europe for 35 usd FOR 32 oz!!!!! menzerna 400 aprox for 32 FOR 32oz!!!!! do you have any expirience for a good AIO product , such as menzerna 3-1, to recomend to us in europe??

[@therushden]

I take it you use these products up after reviewing them? You must spend 100s$ on buying stuff to review. For which we're grateful. Great video as usual 👍

[@apexdetail85]

Well... I dont have to buy compounds for the next year or so. 😂😂

[@je2p378]

Hi Brian..as always so entertaining videos of yours to watch. Why dont you give a try on scholl concepts S3 gold xxl. Really It is mind blowing unbelievable pleasure to work with and phenomenal result. If from ur point of view..the sonax cutmax and HD is the top 2...then i can assure you the Scholl S3 gold compound, will replace either the two of those as the new champion or runner up in your scale of liking.

[@apexdetail85]

Scholls is definitely on the list👍🏻

[@MONSTERO7]

JEFFREY P hey man, have you tried the Scholls S20 Black?

[@Ali-uv3dz]

very good test can you do it with gyeon compound +

[@orangejuicejones571]

Great series!! Can you try hyper compound? Thanks

[@apexdetail85]

Thanks! Yes that one is on the list👍🏻

[@hashar1232]

can you suggest me a compound with little to no dusting.

[@austinmoyer9805]

hashar1232 jescar correcting compound or griots fast correcting cream

[@MultiXANTIA1]

bro!use lambs wool pad,no orange pad wrong test with shcc300 & orange pad for medium cut

[@almarigney6429]

What's a good compound for heavy sand scratches

[@RoBruy]

Would you please test the Koch Heavy Cut H8.02?

[@apexdetail85]

When they make it easier to get here.😀 I would love to.

[@RoBruy]

I think it is a good compound, can i send a bit of product to you?

[@apexdetail85]

Absolutely! 140 West Penn Ave. Robesonia Pa 19551

[@RoBruy]

Apex Detail i do my best.

[@RoBruy]

I have done my car wil send it this week, give it some time, it needs to come from Belgium :D

[@rogerbaron9514]

Do you have an opinion on Scholls Concept 3 XXL Compound?

[@apexdetail85]

I have Scholls coming up soon👍🏻

[@rogerbaron9514]

Great. It's been recommended to me as has CarPro Essence as a finishing polish. Looking forward to your reviews.

[@clearriver5987]

NICE VIDEO AND WITH WITCH ONE DO YOU HAVE FINICH

[@Rocheman79]

Sonax ftw

[@apexdetail85]

It will be hard to top👍🏻

[@cipriandoxu4382]

The toth paste have the same rezult

[@chrismay1a]

by the way got a reply from maxshine they said i need to order a 5,000 dollar order to be a Canadian representative that sells their products.. so that's not happening.. lol if i had 5,000 dollars i would be running my company. instead today i went to 2 job interviews. I have 8 years of experience detailing have wet sanded and polished over 2,000 cars and i cant even find a job that pays more than 12 dollars an hour.. idk it insulted me today being told they would start me at 12.. think i have to steer away from detailing for a bit and just do a driving job where i sit on my ass all day cuz those start at 15 a hour lol. sucks cuz i am trying to further my experience as a detailer

[@apexdetail85]

Yikes! Iam not surprised. Well... come up with your own polishers! I will buy and showcase the first one! 😄

[@romanescalera7752]

Yea man its a tough time for detailers. The detailer at our body shop got fired, painter does such a nice job we hardly ever needed him. Plus he was always putting in requests to order expensive products. The truth is that most places that require a detailer, it's not really that difficult of a thing to get the job done there. You can only make money as a detailer by starting your own business

[@christianbritos5960]

Hey, how are you?Have you tried koch chemie H8? Love this series!! Cheers

[@apexdetail85]

I cant get it here....unfortunately.

[@kevinbrabant1936]

Can you use it With a dual action

[@alfarizki90]

He use DA (dual action) polisher, its called flex XFE 7-12 3 inch polisher

[@kevinbrabant1936]

@@alfarizki90 aaah thanks

[@chrismay1a]

so many videos and information.. i kinda feel like im missing some videos i cant find? my favourite is jescar correcting compound and sonax perfect finish. with a mf cutting pad and than a finishing pad. dont want to watch the sonax one as i saw in the title that ones pretty expensive and i already find jescar to be expensive... looking at your channel i dont see the wizard one, or the anglewax or the jescar hd cut? i thought jescar only had 1 compound there c.c one

[@felixf5211]

If you cope/paste the name of the product from your post in the channel's search, all the applicable videos will come up. You can get there by clicking on the name of the channel and then on the magnifying glass icon on the header of the channel's home page. As an example: kzbin.info/door/qZOhpSAihtUBnebhY_ro_Qsearch?query=jescar+

[@apexdetail85]

Thank you Felix! 👍🏻😃

[@TheDeafcanadian]

What happened TLC?

[@apexdetail85]

There are too many honorable mentions...lol...had to shed a few.

[@rezhasetyawan8011]

What the different hcc 400 and hcc 300?

[@ByeEvoX]

Incase if you didn't find the answer, 400 cuts like a light compound, and finishes very, very nicely. The 300 cuts like a heavy compound and leaves behind cloudiness. In other words, you would need to follow up 300 with something to refine. Whereas 400 is a true 1 step because it finishes so good. That being said, 400 wouldn't work well on a car that has hard paint, or a car that has deeper scratches. It will still refine nicely, but won't have much scratch removal. Thus 300 comes in for these kind of jobs. Both are diminishing products being that they start at a high cut rate, and break down into the "polish range." However, even though 300 breaks down, because there are such aggressive abrasives in it, it does not break down to the point where you can use it and be done. Another example of a similar product in strength to 300 would be Menzerna 1000. 1000 does NOT diminish. Hope that helps

[@VictorHernandez-nt3tw]

It will not stall like a RUPES... Lol

[@apexdetail85]

BINGO!

[@breadhunter44]

Review 400 Thanks

[@giscardetailing6900]

poor configuration, high-cut microfiber pads, micro-lamb, or high-density foam such as lake country gray force or lamb are used.

[@Bllaney]

Try the new perfect it 3m extreme cut it will blow away all this

[@mattp733i]

This Menzerma heavy cutting compound produces too much dust when your buffing! I wont be buying this again.

[@Dave_the_Detailer]

Matt P that is very very true. The 400 is not as bad as the super heavy cut but I’m looking to replace the 399 also

[@jamesbiedlar590]

A bit disappointing....the 300😞

[@apexdetail85]

James Biedlar it was!

[@American0313]

I'm curious if you had used a rotary the results would still be disappointing?? When you reach the conclusion of your top compounds and do a final show down, could you possibly use a rotary as well?