Thank you from The Dominican Republic!! God Bless You!
@cutting-it-close3 жыл бұрын
Our pleasure!
@pantalalabs Жыл бұрын
You saved my day. I was cutting PSAI (softer than acrylic) with a 2 parallel bit and it melts every time. Changed for 1 cut flute, slowed down spindle speed and 1/2 of the feed. Now I have a clean cut!!!
@honestreview16112 жыл бұрын
Makes complete sense. I was once cutting some nylon with a .062 4 flute bit and was completely wrong bit for what I was doing I was going through so many it was crazy. Live and learn! Thank you for the good content!
@amcustomswoodshopepoxyprod50962 жыл бұрын
Thanks so much for the great video. I’ve noticed that you give so much information and you’re a good teacher. I’ve learned more from your videos than any other resource (I currently have) on the “Do’s and Don’ts” of CNC Machining. Your Chip Load chart and excel spreadsheet helps me every day at work where we have 2 different industrial CNCs. We often run 2 spindles with dual 12 tool auto changers. So seeing your large CNCs it sucked me right in because that’s basically what I run every day. The 1 Anderson CNC we have also has a moving table @ 10’ X 5’. Thanks for all of your hard work making videos and sharing information.
@nrayanerhg53h Жыл бұрын
Very well explained and to the point. Thanks!
@Joeyarhino1 Жыл бұрын
This was a great video I’m gonna buy a fixed base router to cut some plastic and this was very helpful
@ChipPuccio4 ай бұрын
what method other than clamps, or screwed down will work in holding sheets to the spoilboard? Will be working with .25 and .5' thibick 4x4 sheets and carving out 10x8 rectangular and 3x6 oval signs out of sheet and do not want to use tabs . double sided tape or CA/Blue tape work in securing well?
@skyhawk12563 жыл бұрын
Hi Ryan, a really great video serie you have made here,thanks...
@ronaldramsey77742 жыл бұрын
HELPED ME A LOT...THANKS FOR THE INFO!
@slingernoob356 Жыл бұрын
What plastic are you using in the video at 3:02. And what website did you buy it from. Thanks!
@acerjuglans383 Жыл бұрын
I have an Amana O-flute downcut bit. I bought it to use when cutting acrylic sheets, for my LED signs, but I haven't gotten around to trying it yet. Just an FYI there that there ARE downcut versions of an O-flute out there.
@cutting-it-close Жыл бұрын
There is but I don’t understand why, it gums up and melts your material instantly.
@ncallas534 жыл бұрын
Good information, thank you!
@nizamuqureshi58182 жыл бұрын
Thank you 😊 for your information
@Cico91892 жыл бұрын
Great video. Subscribed. Thanks brother 👊✌️
@PanayiotisMavrokefalos4 жыл бұрын
Very informative and to the point video Ryan! Thanks for sharing. Sheds some light on how to start cutting plastics. What about the performance of the machine. What are the minimum feedrates and rpms are required for this bit to perform? Also any ideas how to handle plexiglass? I need to cut a small piece but have no idea what needs to be used.
@PanayiotisMavrokefalos4 жыл бұрын
@@cutting-it-close super thank you!
@anthonydellinger30164 жыл бұрын
Great Video! Thank you... What bits have you used for Engraving/Pocketing into 1/8" Two Color plastics for letter heights 1/4" to 1"? Keep the videos coming, your doing an awesome job!!!!!
@philstat1003 жыл бұрын
Thank You for the great video and very valuable information. If I undrstand you correctly I could use this bit with my plunge router to make a circle. Please correct me if I am wrong. again Thank You.
@buddyturner Жыл бұрын
Good video, what bit and speeds is best for engraving cast plexiglass? I am getting build up on vbits and carving or engraving bits that mar the surface. Thanks
@cutting-it-close Жыл бұрын
I would slow down the RPMs on that, you are melting it I think.
@botoepfer8588 Жыл бұрын
Hi I cut and mill HDPE with O flutes with no problem I started to "Trace " or "engrave" using a 30degree chamfer bit and it do not get clean images. what bit do you suggest, The depth of trace is -0.0638 to -0.0955. Thanks
@shelby504114 жыл бұрын
Very nice but issue is o flute bits are extremely expensive about 10x cost of 1 or 2 flute...i have had good success in king color core hdpe using single flute
@BeaulieuTodd2 жыл бұрын
Super helpful!
@GarrettFromme3 жыл бұрын
Good explanation. Thank you
@jeffverdin61054 жыл бұрын
Good video! Thanks again
@Nunak91 Жыл бұрын
Single flute and O-flute are the same thing?
@DREAMVIZON83 жыл бұрын
Great Video!!!! what's the name of that material you was cutting on the CNC machine thanx in advance
@cutting-it-close3 жыл бұрын
HDPE High Density Poly Ethelene I believe is the correct spelling
@MartinsonManufacturing3 жыл бұрын
Thanks man!
@forloop77134 жыл бұрын
Can I use these to cut wood
@evanlane169010 ай бұрын
Thanks!
@krasimirkolev7773 жыл бұрын
Thank you!
@LG-ro5le2 жыл бұрын
What is the best way to probe a spiral o flute end mill? Ive found when i use a touch probe it always completely misses the material surface on the first pass, and when i use the manual Z - 0 position technique with a piece of paper it always ends up cutting too deep
@CrazeUK4 жыл бұрын
Good video. I wonder if you can get small ones of these.
@stevenalexander43728 ай бұрын
Yes you can. I've used 1/8" but I believe they make smaller.
@hesperaux3 жыл бұрын
Excellent. Many thanks. Liked, and I think I'm going to sub.
@Sam-ch4jh4 жыл бұрын
Thank you I struggled with a hand router cutting plastic (nylon 66) using straight end mill Will try this, is there any other name, could not find in aliexpress
@wd91023 жыл бұрын
Take a look here www.aliexpress.com/premium/1-flut-aluminum-mill-bits.html?d=y&origin=y&catId=0&initiative_id=SB_20210101205142&SearchText=1%20flut%20aluminum%20mill%20bits
@chrissewell1608 Жыл бұрын
Did you try an American company?
@giostourista2 жыл бұрын
can you please tell me what kind of bit do i need to make a 3d on acrylic? i tried tapered and ball noses..but nothing works.. they leave stuck material on acrylic..
@cutting-it-close2 жыл бұрын
Your RPMs are too fast! Or feedrate too slow, it’s melting the acrylic
@FMR_FMR4 жыл бұрын
Too many thanks
@mattbowers53424 жыл бұрын
Hadn’t heard of this type of bit, so appreciate the info. It looked like you were able to feed this bit pretty quickly in the clip with the red plastic, what type of material was that and do you know what the federate was there?
@mattbowers53424 жыл бұрын
Cuttin' It Close thank you for the response!
@raybrown919 Жыл бұрын
You need better microphones to sound quality goes loud or quiet, loud or quiet and it’s hard to listen to you with headphones on at the loud parts are really loud
@sebastiandelamaza84402 жыл бұрын
you can be more agressive with your stepdown, i use a Ø6mm endmill and cut 30mm HDPE in 2 passes
@matt10cool4 жыл бұрын
Can you use o flute bits for hardwood?
@jasoncross56843 жыл бұрын
Where you gone you’ve disappeared
@jasoncross56843 жыл бұрын
Really pleased hope you haven’t been badly affected by the lockdown