Cutting Stickers on a Silhouette & Erin Condren Plan with Me

A little look at how the Silhouette cuts out matt vinyl sticker paper and a plan with me in my Erin Condren.
If you fancy getting your own Erin Condren planner this link will save you $10 bit.ly/erincond...
Silhouette Portrait: goo.gl/KK9bXR
My favourite Sticker Paper (so far!): goo.gl/dxi3i5
Washi Tape: www.thehomemake...
Lewis & Irene fabric: www.thehomemake...
Silhouette Sticker making playlist - • Silhouette

[@DeerestDahling]

You are seriously one of my very favorite KZbinrs to watch. Your videos are always pointedly as much as simply and smartly done. Thank you so much for the content that you share and especially the way that you share it.

[@MissStitchery]

+Deerest Dahling bless you xx

[@Daksina]

I only just learned this recently, but you can change the blade setting by putting the blade in that hole where you load the mat, on the left hand side and manually twist the blade to whatever number you need. Neat trick if you've forgotten or lost your blade! Love how your spread turned out!!

[@MissStitchery]

+Daksina thats a brilliant tip thank you so much for sharing, will remember that for next time! xx

[@chelseafretz]

Do you have a video on how you create the stickers? How did you get the correct sizes for them to fit so perfectly in each box?

[@QueenMabelandDoris]

Love your layouts....and I thought I was the only one who had a today sticker at the top, followed by to do!!

[@ChristinaCurtin]

i love the one colour per day, its very organized.

[@MissStitchery]

Me too, really helps make each day lovely and clear!

[@sewlivi]

I love the simplicity of your layouts. :) So pretty!!

[@snuffelbuf]

On the left hand side just in front of where u put the paper in is a hole where you can also change yr blade from 4 to 2. You can also speed up yr cutting in the cutting program

[@luxlight2009]

Not sure if someone already mentioned to you, but the twist tool you did not have for this video is not really needed, you can use the hole on the left side of the silhouette right in front of the blade cartridge the same exact way. thanks for posting your video!

[@pixiepie3667]

there's a little twisty tool for the blade built into the silhouette.

[@malloryrobinson9601]

I am not sure if anyone has mentioned this below in a previous comment or not, but the little hole on the left of the portrait will change your blade setting. That way you don't have to have a tool to change the blade. Hope that helps!!

[@MissStitchery]

+Mallory Robinson Mallory you are awesome I had never noticed that before, thanks for sharing!!

[@malloryrobinson9601]

+Miss Stitchery you're welcome!!! Glad it helps :)

[@fantagemaather]

love your videos! you just earned a new subbie :)

[@Reddtoopretty]

Can you do a video on how to import clip art and adjusting cut settings... Basically how you made those weather stickers

[@MissStitchery]

+XXPrettyAndPink just uploaded one, hope you find it useful!! kzbin.info/www/bejne/i5XGYaeihNppn5I

[@rubyredortega]

The little circle on the left hand corner of your machine is to adjust the blade.

[@itsmeamanda01]

oh i love these!! would you consider sharing the template??

[@cupcakecutie70]

How do you create a template where you can just switch out the colors?

[@honeyblossom2219]

Can you please make a video on how to cut the sticker sheets completely out? I know how to do the kiss cut lines, but I'm having trouble figuring out how you tell your silhouette to cut the outer lines all the way through and then only kiss cut lines around the actual icons and such.

[@jeannexo]

Do you have a modifiable template for these stickers that you can share? I LOVE THEM and I would certainly pay for them. I don't know how to create these. Or if you could do a tutorial video that would be A-MAZE-ING!!! Love love love this video!!!

[@charlisafrye6641]

Please help me understand how to set up to cut half sheets. Also, I am just so new to planning and the silhouette, I just don't think it's picking up my images per these videos. Do you ever use a blacked out cut sheet? If so, please explain how to create. Thanks, Lisa

[@cumaibears]

Your Silhouette is so "listen" to you! My Silhouette Cameo never read registration marks at first go, so I always make it read manually.... :(

[@beckybloomwood29]

what do you mean? I haven't used mine for a few weeks and now it won't feed into the machine to cut. I am at a total loss of why it won't work or where to get advice.

[@TheGLOSSette]

I don't have a sillouette but im curious as how the machine knows what shapes are where in order to cute properly. Do you have to do some sort of setting on your computer or something?

[@MissStitchery]

+TheGLOSSette hi its all done in the sofware, you draw a shape then you create a cut line, the cut line can be outside the shape so you have a white border on your sticker or you can outline the shape with your cut line so it cuts directly around the shape. Its very clever!

[@rubyredortega]

Most people say that you need a blackout sheet for the stickers,,they save both files,do you do that too?

[@PinkSugaryBunny]

Im having issues with mine finding the registration marks. Ive tried the light thing, and going over the areas with a sharpie. Really confused. Would like some help please. Thank you :D

[@MissStitchery]

+PastelBunBun.com ugh its such a pain when that happens! You have tried everything I would do other than turning it on an off again I dont have any other suggestions sorry!

[@PinkSugaryBunny]

I figured it out. Believe it or not there is 2 paper feeding buttons. Needed to press the top button instead of the one under it like I was doing :D

[@kdassaro]

Thanks for your videos about the silhouette. I was curious if it works with printable sticker kits from etsy. There are so many cute kits on there but I hate cutting by hand. I have watched a few videos but they are mainly about creating and necessarily about getting those huge sheets into the program.

[@MissStitchery]

+Kathy Dassaro Hi Kathy i actually havent tried it myself. I imagine you can import it into the silhouette software and add cut lines, worth downloading the software and giving it a try!

[@getyourstampon2311]

fantastic!! what printer do you use? your colours are so crisp and true to design. Mine are coming out a pastel version of what my screen depicts

[@MissStitchery]

+Get Your Stamp On hello! I chat about the printer, settings and paper I use on this video here: kzbin.info/www/bejne/qJfcmaWNn899p6c links are all in the box too!

[@followthesheppards]

hi there. what printer do you use and what sticker paper?

[@patt130275]

Great tutorial, but how does your silhouette know where to cut when you print something from your printer? or is it when you design your stickers on silhoueette and send them to print, the silhouette is attached your your printer and it prints and then you feed it through your silhoutte? I don't know if I explained myself... sorry.. Thank you again :) xxx

[@MissStitchery]

+Patt Hi, in the silhouette software you add registration marks which print onto your sticker sheet. when you put the sticker sheet in your silhouette the silhouette aligns itself to the registration marks so it cuts properly. I hope that helps!

[@patt130275]

+Miss Stitchery so your silhouette is plugged in to your computer, then you print your stickers in your normal printer and the cut them on your silhouette machine right? thanks a lot :)

[@brownskinbeauty]

how you get the colors so bright. my colors look really dull. I just got a silhoutte portrait and Im having trouble getting it to cut right. It won't recognize the registration marks it takes me a while to get it right so it would cut.

[@MissStitchery]

I use a matt vinyl sticker paper and boost my print quality to "Best" in my printer settings. I think the type of sticker paper used can really impact how vivid the colours. I hope you've sorted the registration mark issue, sometimes bringing them in so they aren't on the edge of the page can help.

[@sandraknutsen2893]

how did you do that? cut the paper in different sheets? if you understand what i mean, hehe! :D

[@MissStitchery]

+Sandra Knutsen Hi Sandra its just drawing a box around the stickers, and setting it to cardstock so it cuts all the way through rather than kiss cut. There is a good video here: kzbin.info/www/bejne/hHbRhHeGqM6haas

[@sarah89ann]

Do you sell your stickers or plan to?

[@MissStitchery]

+Sarah Wood No sadly I don't have the time! These are just for me xx

[@sarah89ann]

+Miss Stitchery Never mind! Just love the fonts and headings :)

[@TuuliAlvaa]

love this layout! I would by the way like to say that i also do planner videos, you are welcome to peek in on my channel !