I just came across this video. It's perfect for a project I'm cutting on the cnc. I modeled an adjustable wrench (crescent wrench) and need to cut it in two halves to mill the sliding jaw barrel and thimble pivot pin grooves out. Once done I'll glue the parts back together. Thanks, Aaron. good video.
@dmk-ki4ny2 жыл бұрын
Thanks a lot, Aaron. I'm learning SketchUp and now I've got a new skill :)
@InspiredScience2 жыл бұрын
Much better alternative to Solid Tools, thank you. Most common need for splitting in half, is working on symmetrical items. The initial concept is often built whole, then split once more tedious work begins (later to be mirrored, saving a lot of time/errors).
@jdcamc2 жыл бұрын
After you slice the model and once you select it, while it is selected and before you use the move tool with the copy modifier, you can make it a group. Then moving it to another location is easier because it is not attached to the other half. And the other half would be real easy to select because it is all by itself - kinda like me...😟
@basho662 жыл бұрын
Brilliant! - that solved my issue...
@rossgebert94222 жыл бұрын
Thanks Aaron, another new SketchUp skill.
@keggyification2 жыл бұрын
Thanks Aaron, poor Grogu though, looks like he's been sliced with a lightsaber. 😆
@Skans-Gustav2 жыл бұрын
Never thought of that method. Thanks.
@bobd.2 жыл бұрын
Couldn't have been more timely. I was just about to email you and ask if you had anything on this topic because it is something I need to do right now. Thank you Aaron.
@babsgraphics Жыл бұрын
Thanks, i learn a lot. i'm SketchUp user from Philippines Bicol
@joe_fabricator2 жыл бұрын
A great tutorial it is...hmmmm 😏. Thanks Aaron. I've recently bought a couple 3D printers so this is going to come in handy. Cheers.
@Gloubi062 жыл бұрын
Thanks Aaron! I now better undrestant the intersect with model command 🥳
@sameerachalamalasetty3546 Жыл бұрын
So helpful. Thank you so much. Great Job.
@rainerhasler1352 жыл бұрын
Thanks! That's what I was searching for! Good teacher!
@dhammer56452 жыл бұрын
I love how in the beginning of the video it looked like Aaron has Yoda ears. On purpose perhaps 🤔?
@jbonegw3 ай бұрын
Perfect!
@tvideo11892 жыл бұрын
A plugin called "Zorro" works like a champ.
@brianpalay23 ай бұрын
Helpful!
@jonomoles2 жыл бұрын
Nice one. Anyone teetering on the edge of shelling out for the Artisan extension set might be persuaded on the basis that it has a cutting tool called ‘knife’ I think. I call it sword because that’s what it looks like to me but I’m a rebel, Dotty, a loner…
@jjJackson012 жыл бұрын
REQUEST::::can you cut a pipe/tube at the seam and unwrap and lay flat? i would like to ultimatly print it out at a 1:1 scale to trace on an actual pipe.
@James-u9z2v7 ай бұрын
Very helpful, thank you!
@4STEVEJOY342 жыл бұрын
That would be very handy to remove a tiny-bit off the bottom of a cockeyed part for 3D printing. Thanks.
@kpare0de2 жыл бұрын
What's the command on Windows? Ctrl / alt / ctrl+alt don't work with the Move tool selected, I've tried to slice it in the same place twice and it's not cutting properly and it's only letting me stretch the model.
@MrKistel10 ай бұрын
thanks!
@RDUBTutorial10 ай бұрын
tried this many times with SU pro v23.1 2023 does not work....not sure why
@JohnColgan.2 жыл бұрын
SketchUp had a LaserSabre mode that he modelled few weeks ago
@rafalesousa67812 жыл бұрын
I can intesect the Faces but I cant select them seperatly
@thebonapettit98282 жыл бұрын
Blender > big square that cuts the part > boolean > apply modifier > copy cut part > ctrl+z to before the boolean cut > move square to other side of model > Boolean > Apply modifier > ctrl+v > Profit?
@ahsmuzikero Жыл бұрын
thanks again sir...
@Benham_Design2 жыл бұрын
Cutting plane AKA lightsaber
@dwayne6402 Жыл бұрын
After this I'm off to learn the section tools.
@daCATgraphics2 жыл бұрын
Thanks. Always forget how to do this
@tkkhan012 жыл бұрын
Can this be done on the free version or pro only?
@kosisochukwudon-adinuba1412 жыл бұрын
how do i simply cut a portion of a 3d object?
@besogogebashvili82122 жыл бұрын
THANK
@apolpieTV Жыл бұрын
why it's not working on me
@Jay-xe3cq7 ай бұрын
How is the camera so smooth when panning?
@SketchUp7 ай бұрын
Space mouse by 3D Connexion
@Jay-xe3cq7 ай бұрын
@@SketchUp Thank you! I love it, it's like using a game controller.
@metamech73832 жыл бұрын
Aaron, did you ever live in Lafayette, IN?
@metamech73832 жыл бұрын
Dude...that's got to be you. Harrison high school? West Side?