CVK EXPLAINED for the KLR650

[@scottcates]

I've serviced about 75 Mikuni and Keihin carburetors and this video is *by far* the best run through of the CVK carburetor I have ever seen. I learned a few more things and learned to forget a couple things, too ;)

[@megacityperformance3523]

haha, glad to help

[@megacityperformance3523]

funny thing, i have to remake this video, there are a couple omissions. lol

[@tresaqui07]

Awesome! thank you for the video very helpful I have the exact carburetor on my GN250

[@49Roadmaster]

A very good 101 starter for the new guys, and for the older guys who THOUGHT they knew it all.

[@megacityperformance3523]

lol

[@riaandewinnaar5040]

Best explained carb video ever. Been troubleshooting for a few days. I am going to fix it now!

[@epicridesandtours]

The first of a heap of vids I've watched, trying to find out the right way to inst all that retainer and the needle! Awesome vid, mate! You've explained what everything does, not just "replace this, clean that."

[@joeedwardson9535]

Nice video, I was not sure about the slide and needle, vs jet, now I get it. Your kit really smoothed out the power delivery on my KLR, thanks

[@scottlay5244]

You’re awesome. Best tutorial on the klr carb ever! Thank you

[@1speeder]

Thanks so much for this very detailed video! I'm going to clean the CVK34 on my KLR250 for the first time soon and feel pretty confident now that I'll clean it and put it back together properly now.

[@megacityperformance3523]

you're welcome, happy motorin

[@Blacksunshine636]

I'm rebuilding my KLR carb right now and this video is awesome! Thank you! I'm gonna have to hook it up with some MCP kit while I have it out.

[@megacityperformance3523]

Glad it helped!

[@carvalhonj]

Wow, thanks a lot for the video… I just bought a 2018 KLR a few days ago and never owning a carbureted bike I was looking to know how this works in case of any future problems. You play with it if you only have a screw and a nut in your hand… You are a master. professional. Very good job sir👏🏼👏🏼

[@eikepape3920]

Looking forward to clean my carb - this is the best video I found for working on the carb! Thanks a lot for making this great video backed with experienced knowledge.

[@megacityperformance3523]

you're welcome

[@johnhamilton2680]

Above my pay grade but I learned a lot. Thanks for sharing.

[@joelgaland3769]

Thank you very much for this very high quality video! Your way of filming is really great, and your explanations are really great! At times, Ont even has the impression that it was you who designed this carburetor! I just cleaned my carburetor, but I realize that I forgot or did some things wrong. Besides, my bike chokes when I accelerate! 🙄😏 So I will follow your advice. Thanks again ! 👍🏻👍🏻👍🏻 (Message made with a translator) 😬😬😂😂😂

[@megacityperformance3523]

You're welcome, do the air cut off mod and fuel tap mod found on the Megacity performance facebook page - click photos/albums/mods album facebook.com/media/set/?set=a.119982954262141&type=3

[@krugerparksafari]

excellent video thanks very much - perfectly explained the carb and everything related to it

[@willlawhon3362]

May God bless this man..

[@Mr.EeToMyself]

I agree. I bet ten guys in the whole world knew what he just showed the rest of us ignorant ones.

[@kris4362]

Excellent Grant, 👍👍👍👍👍👍👍👍👍👍👍👍👍👍😎 (Hokitika Sth Westland NZ)

[@davidmills5557]

I just wanted to Thank you so VERY MUCH for taking the time to share, edit, and upload this video!! Your efforts are NOT in vain, and MUCH appreciated! I know how time consuming editing and uploading can be. But the knowledge, details and tips you share in this video are SO helpful!! I now have the confidence to rebuild the Keihin CVK36 carb on my 07 Suzuki Vinson next weekend. I wasn't sure I wanted to tackle it, but your video was a breathe of encouragement!!!!! I'm sure your busy sharing more knowledge, but do you know if the carb in this video would be the same as a CVK36? Thank you Brother!! God Bless!

[@megacityperformance3523]

lol wish i could edit them, I'm a mechanic not a videographer. lol

[@megacityperformance3523]

Carbs are very similar, both being CVK's

[@pythonplunger323]

This is a GREAT video, my new to me 2009 KLR thanks you for all the detailed and perfectly understandable explanations!

[@megacityperformance3523]

Glad you enjoyed it!

[@FocusedUpward]

Great video Grant. I'm still enjoying your jetkit !

[@megacityperformance3523]

Thanks Ryan

[@nose2wind872]

Excellent video. I learned something. Thanks!

[@danmanthe9335]

Thanks for doing this video! Sure wish I had found this when I had the carb out of my '10 KLR. I ended up making a couple mistakes in putting in and taking it out a couple times

[@megacityperformance3523]

check out the rest of the videos, lots of good info, although i'm a better mechanic than videographer though lol

[@Sonic_Specialties_LLC]

super helpful Grant!

[@Genericname218]

Thank you!! Needed this

[@popeyewatch]

Fantastic tutorial! Thanks for sharing!

[@daencr8678]

Thanks man! Helped a lot! My air filter has disintegrated and so lots of dirt got in the carb. As a consequenze of this the air jets were heavily clogged.. Didn't know where they are going..

[@megacityperformance3523]

Yw, the circuit tracing one goes a bit more in depth

[@mariovaillancourt]

Thanks for your video. I have a klr 650 2018 with 16000 km or 10000 miles. Lately it started to back fired alot and the sound of the engine is kind of louder. Seems like the engine sounds comes from the carbs area.

[@jasonlockhart202]

Awesome video. Thank you

[@Heraclitus188]

Mate if you are in my neighbourhood (Camotes Island, Cebu, The Philippines) drop in and give me a hand with my KLR - I will feed you, provide a room, and buy you beers for the rest of the year!!!

[@megacityperformance3523]

I have half a mind to retire in the Philippines

[@Heraclitus188]

@@megacityperformance3523 There are worser fates...I have been living here for 12 years now.

[@AlHuntington]

thanks so much Grant

[@megacityperformance3523]

yw

[@hvymax]

I hate it when Righty Tighty turns into Righty Loosey.

[@bricetetrick1457]

Great vid, thanks

[@shanemyers4142]

Hey brother, I love your video. Very clear. Do you know what might be causing bike to die upon throttle? The jets are clear, needle and seat nolonger leaking, vac lines and fuel pump are all new. It only let's me rev if I spray a little bit of fuel on carbs and wen I turn the idle speed screw, the idle sounds like it won't pick up either. It'll idle on and off choke perfect every time. Just won't rev.

[@megacityperformance3523]

lose the needle jet when it was apart?

[@WmLatin]

I learned a lot- probably not enough though. ;-)

[@tonyrichengod9280]

Very thorough directions. However, can you explain how the choke works on this carb? Seems up open a passage into the diaphragm chamber when pulled out. What does that do?

[@megacityperformance3523]

choke is explained here facebook.com/MegaCityPerformance/photos/a.161065705443413/541406700742643

[@herdbrian6662]

Great video thanks for doing it I learned a lot . Although I found the gum chewing distracting and hard to listen too.

[@kayakero1969]

What a tutorial!!! I have to do it next weekend on my 08' 35k miles.lused carb cleaner and air compressed but l didn't remove the diaphragm before Big mistake..a lot of back fire and lost power at low speed .So l bought a cheap Klr new carb on ebay not a CVK .Do you think is a good idea to use some of those pieces like diaphragm jets or springs in my CVK?? I'm not sure about material quality.Thanks for this very detailed class.

[@megacityperformance3523]

the slide diaphragm would likely be ok to use, the air cut off, nope. You can no longer buy a cut off that works for long, MCP comes with a mod to disable the cut off. I wouldn't replace quality japanese parts with cheap chinese knock offs.

[@rsouth1958]

use of a JIS screwdriver is highly recommended.

[@captainbob406]

Great video! I learned a lot about the carb. Question though.... I think you said turning the fuel screw more that 1.75 turns out doesn't make any difference because you exceed the adjustment limit. Yet, you adjusted the fuel screw to 2.25 turns out in preparation for your MCP carb kit. Did I miss something? Again, great video. Thanks for putting it on KZbin.

[@megacityperformance3523]

the video is referring to a stock carb without mcp, WITH mcp the fuel screw works properly and should end up between 1.5 and 3.0 turns out. Any more than 1.75 turns out with a stock carb starts to flood the bike, no matter what mods are done to the bike

[@huskydad72]

Thank you for this video. I recently bought a 94 klr650 with this carb. The bike ran pretty good. I took the carb off and cleaned it. Put it back together correctly. Now it pours gas and floods itself out. I have a rebuild kit coming in case the float needle is bad. Am I missing anything? Thanks again.

[@megacityperformance3523]

something stuck in the float needle/seat

[@hvymax]

Yeah mine got dusted when the bottom of the airbox melted.

[@theRealBased1492]

I was using a CVK and decided to swap it out with another carb, connected all the right hoses back in place, made sure the throttle cables were in good order, but my only issue now is I have to keep choke cable eliminator pulled out or it stalls. What do you suggest?

[@megacityperformance3523]

plugged pilot jet or wrong pilot jet

[@rickthompson1422]

....my 2002 carb is overflowing fuel out of the vent line....massive 1/4" stream of fuel like a horse pissing on a flat rock ...never had this happen before...what's my problem ? Thanks....

[@megacityperformance3523]

something stuck in the float needle and seat stopping it from sealing.

[@randallsmerna384]

Move the horse away from the rock. 😂😂😂😂

[@randallsmerna384]

03 KLR 650. Grant, I found my idle mixture venturi clogged. Now that I put it together it idles well but it dies when you give it gas. What did or didn't I do? I can't get to those damn adjustments with the carburetor on because the starter is in the way...

[@megacityperformance3523]

main jet plugged?

[@andrewevanoff1192]

I just took apart carburater on my 2012 KLR to install your kit. The enricher diaphragm had a lot of gummy substance on the vacuum side. Just curious if it's normal? I don't see any holes in the diaphragm. The large diaphragm that drives the needle, also had some gummy oily substance on the vacuum side (top side). I'm a bit puzzled if it's normal. The bike was acting up, stalling after running on choke for 2 minutes (cold start). I also noticed gas leaking from the snorkel drain hole. First thought was that the fuel talp diaphragm was leaking fuel into the vacuum tube but I could not verify it. A new diaphragm sells for $75. I'd hate to spend that much without being sure the doaphragm is defective. I only ran premium fuel in the bike since new. It pings badly on regular fuel. I can see some ethanol damage on the inside of the carb (white flaky coating on aluminum parts). I thought the 2012 model was rated for ethanol fuel but it's not.

[@megacityperformance3523]

not normal no, see the Megacity performance page on how to disable the air cut off valve. Yours is leaking badly by the sound of it. They are such a problem i send a print out with your kit about it, i emailed you about it when your kit shipped and i post about it constantly on facebook. Disabling it completely is a new developement becaue a good replacement valve doesn't exist, even new oem ones leak as it appears oem are cheap ones now too. none work, disable it.

[@andrewevanoff1192]

@@megacityperformance3523 Thanks. I don't remember reading about it but I bought the kit a year ago. I can't find anything about it on your webpage. Fecebook wants me to log in. I don't have a Facebook account nor want to have one. Is it posted anywhere else?

[@mrfixit5719]

Great vid! I'm having trouble 50mph and over. It seems that when the bike warms up it starves for fuel and starts surging like it's running out of gas. I put an Inline fuel filter on and the gas just barely trickles. I took the fuel filter screen out of the houseing...still trickles ( I can see thru the sight glass). Question: is this a vaccume issue with the pit kock shutoff valve you think? Any info is appreciated. Thanks man!

[@megacityperformance3523]

that is a classic sign of the carb flaws that the MCP carburetor kit was designed to fix (among other things). Mcp isn't just jets it changes how the carb works and the only way to fix the surging. See the MegaCity Performace facebook page

[@megacityperformance3523]

could also be the vacuum fuel tap failing

[@arnoldhobson2573]

@@megacityperformance3523 By this do you mean the coasting enrichener?

[@megacityperformance3523]

@@arnoldhobson2573 that could cause surging too, there is a delete mod on our FB page for the air cut off (coasting enrichener)

[@themotorcycleshed380]

Really good educational video - Very well explained. I've dismantled my carb KLR650 2003 - only runs on choke- sure enough pilot jet blocked solid.. But I don't think the carb is standard. Its a CVK FJ28 V6387 and strangely the throttle bracket does not have a clip in for the return 'shut' throttle cable, only a throttle open - relies on the spring to return. The emulsion tube has 4/2. 4/2 holes and no number as far as I can see. Main jet is 145 standard, Pilot 40, Needle is N24B. I wondered if you could be so kind as to possibly explain what carb I have? Do I need to replace it? Many thanks

[@megacityperformance3523]

gen 1 carbs are a bit diff than gen 2, thats still a CVK 40, your'e good. MCP works the same on both

[@francoisduchesneau7919]

Bought this 2012 KLR with 1,140km on it. The bike is virtually brand new but went into storage in 2018 and hasn’t runned since. The previous owner suggested that it had a carb issue. I dropped the oil and manually turned the crankshaft as a precaution. Drained the old gas and added a carb cleaner additive. New battery etc... Got it going and it idles perfectly. My problem is that it bogs down at rpm higher than 2,500. Thoughts? Would following your detailed explanation fix this issue?

[@megacityperformance3523]

main jet plugged likely

[@francoisduchesneau7919]

Thanks Grant, took the carb apart and did find some fine particles of metal stuck in the main jet. Put it back together and the bike did run perfectly for a short little while but back to square one I guess. Thanks!

[@megacityperformance3523]

@@francoisduchesneau7919 what about pilot jet?

[@francoisduchesneau7919]

@@megacityperformance3523 The pilot jet is sealed under a witness cap (for the lack of better words). I didn’t check due to the bike starting very easily and idling with no issue. Something else caught my attention, the plastic nut that attaches the choke cable to the carburetor housing was stripped and hanging loosely. Went for another test drive tonight and only made it out a few yards before it bogged down and stalled. Just for fun, I switched the fuel petcock to the reserve position and issue is gone. Clogged fuel line or faulty valve maybe? Thanks for your follow up!

[@megacityperformance3523]

@@francoisduchesneau7919 not true, you're thinking the mixture screw, the pilot jet is down in the hole beside the main jet

[@dimitrelostvdocumentaries2903]

sounds like you call them opposite, the float ball vent VS the fuel inlet because as i test them with lung blow, they feel like i say ...i hope IM wrong ,so the question is can i feed the fuel from the down vent? (it seems to cooperate wth the actual floater ball)...also the CV40 of Harley seems to only have the the down vent ,which you called it fuel-inlet ,but i felt it like float-ball-vent..(its almost the same question about 3 times with different words ,its my obsesion somehow)

[@megacityperformance3523]

the lower nipple is the fuel inlet, the upper, the bowl vent.

[@ericdenlinger849]

Thanks for the video! I just bought a used 2008 KLR, and when the rpms get up around 4000 - 5000, it begins to sort of rhythmically "lurch." The tachometer needle isn't all over the place though, and when I rev it up to 5000 in neutral it still runs smoothly with no "lurching". Do you think this could be a carburetor issue?

[@megacityperformance3523]

Ltteraly one of the reasons I made the mcp carb fix kit

[@megacityperformance3523]

check out facebook page for our new air cut off mod

[@jesseperedo6764]

I have a question? My fuel mixture screw is adjusted to 1/58. The carbon monoxide odor from the muffler is strong. But if I reduce 1/&1/4 turns out. The odor is gone and the throttle response is better and starts quicker. Why does it do that. What's the proper way to afj?

[@megacityperformance3523]

what did you do with the air cut off valve, that will be your issue. See our facebook page on how to disable the air cut off valve

[@Lordestroyer]

Bro, I’ve had my carb off 20 times, cleaned, but the idle keeps surging. Can’t find an intake leak anywhere! Any suggestions?

[@megacityperformance3523]

That is one of the indicators of teh design flaws in the CVK40. The MCP Carburetor correction Kit from MegaCity performance fixes that and many other issues. facebook.com/MegaCityPerformance

[@Lordestroyer]

@@megacityperformance3523 I run a DG slip on and the stock exhaust depending on my length of trip.

[@megacityperformance3523]

@@Lordestroyer that'd work without re jetting if the quiet core is in the aftermarket pipe.

[@btominthewind]

on the front of that CVK carb air intake, at the top part of the air intake, there's a half-inch wide or inch wide oblong wide air hole, what's that for?

[@megacityperformance3523]

on the back of the carb? keeps the air pressure below the slide the same as the air box

[@tengairoad5007]

👍🏼🇪🇦

[@krotchlickmeugh627]

"Really good screwdriver" Just say jis #2 Otherwise "really good" is one someone got from their uncle one time.

[@Dr_Reason]

The Japanese screwdrivers are better for this work. They fit the screw heads better than any US type as they actually have a different bit shape.

[@TinaMitchell-l7j]

Rodriguez Sharon Rodriguez Cynthia Walker Jose

[@jeffreyking1745]

Its amazing what people have engineered for internal frustration engines. All useless knowledge for the future of electronic power. I've been in Thomas Edison's house and seen his original lights illuminating the garage of his electric cars. All still working.

[@ThePolak700]

good video but, DUDE!!, STOP chewing the gum!!! Drives me nuts!!!

[@megacityperformance3523]

i'm going to redo this video

[@megacityperformance3523]

pretty much the first vid i ever made

[@ThePolak700]

@@megacityperformance3523 Don't, video was awesome, lots of good information, just please, don't do a gum again ;)

[@Mattc-d2q]

Cant handle the gum chewing

[@seanhammon6639]

Wow. Thank you.

[@howie119]

Is the float valve seat replaceable. I had the valve locked in the seat and damaged it taking it out. thanks

[@Thewarhorse47]

Great video, thx.