CYLINDER HEAD AND HEAD GASKET REPLACEMENT REMOVAL FORD EDGE FLEX TAURUS LINCOLN MKX MKZ MKS MKT 3 5

[@AutoRepairGuys]

Products that we use and recommend: ► Gasket Kit: amzn.to/2W8RAIC ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@mikekeating2492]

@ 1:20:25 you day inspect the seals... The first one you point at.... What would be the issue of that O-ring was messed up or missing???

[@brendaross4845]

No infesting ing hearing about anything Except how to change a head gasket on2110 Ford fusion

[@loriblakeymoon9594]

Hello, I want to thank you for your videos. All the work and time you've invested in helping others as well. I'm a woman on a budget living away from home to be able to spend precious time and help with my mother before she's gone. I'm in tears as I thank you for not just empowering me with your teaching tools and how too videos. Your the reason my car and I are able to keep moving forward. I can't put into words how much your time has gifted me a bit more with my precious mother not to mention avoided me bothering my 84 year old father when he is already overwhelmed with a troubled heart trying to do all he can to keep my mother comfortably loved and cared for and here with us. You might say he is holding on trying to let go. Because of your videos I have been able to do my brakes by myself, change headlights, repair front bumper. And now I will attempting to do my own head gasket. I know that video take a lot of time and patience. Posting them and being able to do it the way you do with no Financial benefit to yourself makes you a pretty special person. Thank you so very much more than you know. From Miss misplaced Lori Moon thank you so very much ! thank you so very much !

[@raulcontes5533]

such a pricise video and information guide: well done guys i learn to much:

[@martingranados6721]

Thanks for your videos, always watched them, right now I will star to work on one of same Engine 3.5L remove head and replace head gasket. But I'm watching all I need to remove,before get to the head. ;-)

[@ryankretchmer1358]

Thanks you guys were a great help for our head gasket and turbo replacment project. Great Job

[@edgardobautista650]

Exelente curso gracias muy completo

[@johnrobi0]

So Jean Girard went into auto repair after losing to Ricky Bobby.

[@agaanderson429]

😂🤣yeah he about to install nitrogen.

[@brandonjones2760]

I appreciate how in depth this is without cutting the time it take to do finicky bolts. Give me a know of how fun this is about to be, cam bolts broke in my '11 Taurus 3.5 sel awd, have to replace the head cause it fubar

[@joesanders6734]

That was actually a great video myself I would rather pull the the whole engine just for the room to do the timing enemy to all the specs looks like to me it's not just a gasket it's going to be a resurfaced great video like I said you guys do a hell of a job

[@JESoccer983]

Thanks so much for this video. I am going to follow your instructions.

[@joetrujillo1028]

Excellent video, congratulations guys

[@omartorres7340]

great video. but i would like for yu to show me how to take off the belt of the power steering pump and how to replace it. thank you

[@markkasiorek4206]

Thank you very informative, any idea why my ford 3.7 in a police utility is getting oil into the coolant? There is no water leak at waterpump weep hole and the oil cooler is good. Thanks for your videos

[@simplyamazinggolf]

Is this for the Explorer 3.5 as well?

[@mft1284]

Yes the 3.5 Ecoboost is used in Ford Explorer (2011-present), Ford Edge (2011-present),Ford Flex (2010-2020),Ford Taurus (2010-2019),Lincoln MKX (2010-2020),Lincoln MKT (2010-2019).

[@billcecala3301]

Please give information about timing of 2015 Mazda 3.7 engine. Water pump failed and and locked engine when I tried to turn crank to set cam gear timing. Chain slipped on crank pulley. Thank you Bill

[@jperez9528]

Thanks a Million! 😎🍻

[@erik909erik5]

thank you for this video i learn much, i have mazda cx-9 now i know how to open it

[@nazmo8900]

Hey man Exellent work,keep up the hard work! I got a question for you! I have s max ecoboost 2l 2011 I cannot hardly find any info i rebuilding my engine, I'm replacing the piston ring, aswell as the head gaskets seal, This is the info i need 1) I need the tork tightness for the piston ring bottom when i tight the crankshaft! (Cause i will be replacing the piston rings only) 2)head bolts tork tightness 3)crankshaft bolts tightness Can you guide me the right place! I have been intouch with fords but no joy! Thanks

[@bobbygutschlag1415]

What size cam lock did you use and where did you find 1 Please and thanks

[@mft1284]

OTC 6682 Ford 3.5L & 3.7L 4V Cam Tool Set

[@vernonpaigejr.1517]

I replaced an alternator before, don't know why I'm watching this knowing damn well, I'm not going to attempt this. LOL

[@hearmonheardjr8065]

Some covers have threaded holes to push the cover off.

[@arathegreat818]

Hello brother. Other than the cam locking tools. Are there any other special tools I will need?

[@ohsherides5590]

This is a helpful video. Do you have one of the reinstall of the head? I can't find it

[@joshbrienen5133]

Yeah THIS is the video that would be useful

[@omartorres7340]

Hola a todos. He visto la mayoría de todos tus videos. Soy de Mexico. y tengo un Ford Edge Limited 3.5 L 2010 y estoy a punto de reconstruir el motor y me gustaría que me enviaran los pares del motor de todas las bielas y todo. Tengo búsqueda en Google y fue en vano. Gracias por tu tiempo

[@stevepalenicek4690]

Thanks for video. I have to do my mkz like to see ahead of time so makes it easier

[@jperez9528]

Thanks. 😎👍

[@Blip_.]

Would it be easier to remove the engine first before making the repairs?

[@TrailVapor]

Mayo oil/blown head gasket: to give the cylinder head to machine shop should camshafts be locked in place?

[@joselopez1544]

If I only have to do the front one close to the radiator. Do I need to take out the timing plate off? Please reply. I have Mazda CX-91, 2012. 3.7liter

[@billylloyd1238]

Do you have any videos on the Lincoln 2013 MKS 3.7 l

[@brendaross4845]

2010 Ford Fusion 2.5 need to see how to replace head gasket

[@biasedshow3768]

I could use some help. I've been looking around and can't find a video on replacing the hood on a 2013 Hyundai Elantra. I hit a deer a week ago and my insurance won't fix it. I was able to replace the passenger side headlight and that's about it. I gotta replace the bumper, the hood and possibly the metal bar that protects the radiator. Good thing there was no internal damage and it's been driving fine, it just looks like crap...

[@insulterify]

most cars its as simple as 4 bolts on the hinges. if the hinges look bent you'll want to replace them. you can usually get them with the hood if you get it from a junkyard. another benefit to a junk yard hood is that sometimes you can get a hood in your cars color so it doesnt need to be painted

[@thomaswalker5197]

Quick question. Do you have to put the front valve cover back on in order to remove the engine mount or is that just a personal preference?

[@TheDirtyGhost]

I am currently working on a 2011 Ford Taurus SEL, i am putting in a new thermostat, head gasket set, and water pump. I am to the point where i just have to clean it up and reassemble everything, can anyone give me an eta on how long it will take to reassemble everything? Much appreciated.

[@jasonmccorkle8760]

Thank you

[@kalebbeck7307]

What about the water pump specs and timing cover specs

[@fakeaccount4092]

Thanks!!!!

[@kennethchoyce8186]

I know this is old but how many hours to do this job?

[@juniorhaughton3448]

Can a 2011 ford taurus 3.5l engine Work into a 2011 ford edge 3.5l And what would need to change for it to work

[@mft1284]

Same engine

[@fredrickburns1152]

How much is the total cost for replacing the cylinder Heads

[@LiterallyJesusChrist]

2014 Fusion 2.0 ecoboost: noticed burning coolant smell and running slightly hot. Discovered coolant level was 1.5” below max. Then noticed some white smoke smells of coolant in exhaust when starting cold. Oil smells a little more gassy than I’ve ever noticed, but no signs of coolant in oil, no sign of oil in coolant. What can cause this? What can I do to confirm what the issue is? Is it safe to drive if I keep levels topped off? 143k miles.

[@mft1284]

Sounds like a blown head gasket. Combustion leak test Use a block tester kit to perform a chemical test on the radiator's vapors. This test can help identify a blown head gasket if you're losing coolant but there are no signs of leaks. Most parts stores rent the kit if you don’t have one. Pull your spark plugs and see if they are wet. Run a compression test. Old school pull all the plugs but the cylinder you are working on. Remove radiator cap, fill to the top with water, pull the starter and fuel fuses. Crank the motor, look for big air bubbles. Do each cylinder. The air bubbles will let you know the cylinder that is compromised. It’s possible that you can have more than one cylinder leaking coolant.

[@VWMANCA]

LIKE THE VIDEOS, BUT I'VE NOTICED SOMETHING VERY DANGEROUS IN A FEW VIDEOS. YOUR MECHANIC ALOT OF TIMES WEARING JEWELRY AND WATCHES WHILE DOING WORK. THAT CAN BE VERY DANGEROUS IF IT GETS CAUGHT ON ANYTHING ESPECIALLY IF THE ENGINE IS RUNNING JUST SOME ADVICE DON'T WANT ANYTHING TO HAPPEN. OTHER THEN THAT GOOD VIDEOS KEEP EM COMING😊

[@rogeliomorales1995]

I can’t find the torque specs

[@MrSilov]

Hi. I am fixing my Lincoln MKZ 2011. I have on the front right with the alternator harness a green wire by itself I don’t know where it belong. Then I have another one where is the throttle body that looks exactly as the one that connect on it but I don’t know where it goes. I looked everywhere can’t find it. If you can give me a hint that would be greatly appreciated. Thanks.

[@codyyoung1122]

Power steering pump

[@MrSilov]

@@codyyoung1122 thank you. Yes indeed it was.

[@codmguy1538]

Where did you get rhe t55 from?

[@codmguy1538]

The*

[@عبدالكريمعرنانالعنزي]

nice guys 👍🏻

[@genehooks7248]

Its abundantly clear that this was the first time yall ever worked on this motor. It was almost comical. Lol

[@rocketboy65]

Hey Moon Shine. Have you ever dome one before? ? I'm contemplating it on my 2009 ford Taurus. How hard is it to do? Thanks!!

[@genehooks7248]

@@rocketboy65 dome one?

[@rocketboy65]

@@genehooks7248 sorry. Was driving! Have you done one and if I am patient and go slow, do you think I can do it? I'd hate to trash the car. No smoke. Just milky oil and a gallon of anti freeze every 2 days. 😢😢😢

[@genehooks7248]

@rocketboy65 if you're mechanically inclined, I don't think you have any issues. Just take all necessary precautions like bolt labeling and dont try it without the cam locking blocks. They're a must. Believe me.

[@genehooks7248]

@@rocketboy65 oh and take lots of pictures. Like the placement of your turbo tubes.

[@hermanknox5159]

Good

[@eottracingteam8274]

Hey bro why did you have to replace the cylinder head?

[@bobd2675]

Where are the torque specs. Mention in the 3.5 Lcylinder head replacement video?

[@mft1284]

It is recommended in your owner's manual to 30 ft-lbs.

[@Pokemon961]

Hi Hello friend I have a problem with my Ford Edge can you help me??

[@Tay58382]

Nope !

[@Pokemon961]

@@Tay58382 I wanted to know there is a switch for airbags?

[@copykon]

geez what a nightmare, might be easier to do a swap.

[@chuckiestyron2968]

I have flow this route for years and I know for a fact. Unless someone tells me why the co pilot seat was missing the rest are just guessing and very badly at that

[@charlesmccraney3190]

I changed the head gasket out on my 08 Lincoln MKX and now it will crank but not start. What could be the problem? Thanks

[@Blip_.]

Your timing chain needs to be set correctly.

[@miguelrenovales-6607]

2010 Toyota Prius no heat

[@FirstNameLastName-fu8ml]

Finally got mine done but now my steering pump is leaking. I dont know what the fk i did that caused it so now im reopening it

[@ivansuarez9390]

hi brother how much this work

[@stephenmbugua3126]

When you remove cylinder head v6 Nissan teana,do u have to remove complete engine outside?

[@stephenmbugua3126]

I want to know coz iam abaut to remove the engine complete out of vehicle?

[@Mike-we3rb]

2:45 it’s a pry tool lmao. You have to PRY it out. The clip didn’t break because it was weak btw. It broke cuz your twisting a small piece of plastic. You’re a mechanic you should know how to pull a clip lol

[@eaglekeeper6056]

Don’t be like these guys and use a torx 55 to remove or install new cam bolts. It’s not a torx 55, it’s torx 55 plus.

[@eaglekeeper6056]

Joshua Baker I removed and rebuilt my engine a few months back and I can tell you with certainty that the cam bolts are torx 55 plus, they’re also not reusable. A torx 55 bit will half ass fit a torx 55 plus fastener, but a torx 55 plus bit will not fit a torx 55 fastener. A torx 55 bit fits a torx 55 fastener loose as hell, with the risk of it slipping and stripping out the fastener. You can even tell from the movement he gets on the breaker bar once it falls in place.

[@eaglekeeper6056]

They must have changed it after 2010, the I’ve got the Vin C engine in a 2012 limited.

[@rocketboy65]

​@J Hey J. I'm contemplating it on my 2009 ford Taurus. How hard was it to do?

[@paradoxintellectualpropert7129]

@@eaglekeeper6056 He was not using a breaker bar. It was a torque wrench. You could hear the click. Not so good for calibration of the wrench.

[@Tay58382]

@@paradoxintellectualpropert7129 You are a complete idiot, it is not a torque wrench it is definitely a breaker bar and I suggest you never attempt working on your own vehicle cuz if you don't know the difference between a breaker bar and a torque wrench you have no business attempting any such type of job

[@ernestramey9361]

BH uh b