Cylinder Plinth DIY - Costs Less than 10$ // Pedestal Stand DIY // Cylinder Pillar DIY

[@julianvesga8925]

Thanks so much...I was going to pay $ 200 for 3 cylinders ... but with this video I learned and I made them....

[@Rosebuddecors]

Thats great to hear🙂🤞

[@lanicruz8090]

Omg me too $200 just to rent them for a day!! This is so helpful thank you so much!

[@lsolidum8942]

What did you use for taller plinths?

[@acireslife1801]

Try upoup it thb

[@arisettydivya9789]

Can it hold cake ?

[@christinajimenez8667]

I am SOOOOO happy i clicked on your video!! Thank you!!

[@monicajohnson3834]

Thank you, I wanted to buy them, but they were too expensive. Now, with your video, I can make them myself. Thanks again for sharing your talent.

[@charlottemakougang7039]

Thank you so much, these cylinders are expensive but with video am saving some money

[@thebscotts]

Thank you! You're helping people save MONIES!!!!!

[@coachvk]

Tip- add white electrical tape to the edges for a smoother polished look. 🙂

[@Rosebuddecors]

Thank you so much 💓

[@october_love21]

Thank you that I came across your video ❤my son bday is comin up nd I can't wait to do this 😊

[@jais7854]

OMG you are a life saver!! I don’t mind trying this if I screw it up I’m only out a couple of dollars!

[@savvicreationz4367]

This is awesome. Thank you. Your thumb nail picture has different sizes. Can you demonstrate a taller size?

[@robertalordagarcia9992]

This is so cool,as I am a plant collector, with this idea I can have more room for plants ❤😊

[@tajeeleathers7325]

Thank you SOOOOOOOOOOO much for this video. I was looking for something diy for my store boutique, and displays just cost so much. Thank you!!!

[@MsBeauty04]

Omg! You just saved my life. Thank you so much for sharing

[@Rosebuddecors]

Happy to help!

[@stytru3860]

I can't wait to try this out. I'm making a big ornament topiary and this would be great for a stand. I would put some DT rocks inside for weight. Thanks for your creativity!!!!

[@Rosebuddecors]

Thanks 😊

[@dahliagovan]

Very cool 💚 I’m gonna try this but I might brush a layer of joint compound for weight and texture 💚

[@datdude3933]

Awesome!! somehow I would glue some weight in the inside to make it a little more sturdy and heavier

[@mirla838]

Wowww. Just wow 👏🏽 👏🏽 👏🏽 👏🏽

[@Rosebuddecors]

Thanks 😊

[@kiajazzkhinme3]

This is exactly what I needed! Thanks for making this video. Can’t wait to try it.

[@tiannabaker5679]

I can’t wait to try this , you’ve made it look so simple!!!

[@Rosebuddecors]

Thank you 🙂

[@mariejuliejoseph5269]

Wow they coast so much money and you show how not to save money by making them ourselves thank you very much,God bless 🙏

[@AnaRodriguez-co8xe]

Your a lifesaver! Thank you ❤

[@cdmanor777]

OMG! I am amazed. I found the perfect diy cylinder pillars. All the other videos I've seen were way to complicated "for me". This one was the easiest one to make. I will be making one for sure for my goddaughter's graduation candy buffet for next month. I will try to make the tiered look as well. Thank you, Miss Rosebud Lady. I'm Definitely subscribing to your channel. (thumbs Up)

[@Rosebuddecors]

Thanks so much 😊

[@danasandouka1687]

Did u try it ? Is it stable?

[@cristinaflores1408]

How many pounds can hold up

[@texadonkey34]

@@cristinaflores1408 free liquor store boxes work great. Make them tall and cover with glittered foam paper from Hobby Lobby. Add tray on top. You can add some weight to inside of box. It holds flower vases great

[@sandersjones1577]

Look good rosebud

[@Rosebuddecors]

Thanks 😊

[@karenblythewood2496]

Amazing work! Thank you Rosebud for sharing with us!!!

[@Rosebuddecors]

You are very welcome 😊

[@Realladyboss.]

Have anyone tried this method? If so how long did your cylinder last & how sturdy was it?

[@manuelpelaez8551]

Dude, thank you forever

[@rosereid_peonies]

Wonderful... now I feel like I can do it... thanks for the hot tips ❤️

[@thembalethumacdonaldseti9039]

Thank you. I will now save $350

[@daphneisack6248]

thank you for sharing .I like it very nice .

[@Rosebuddecors]

Thanks 😊

[@stephanielaurin9796]

Thanks alot for the tips it was so helpful ❤

[@naomiabiolaajetunmobi8652]

Home Depot sells cheap but strong cardboard cylinders in different sizes. Very quick and cost effective. Just wrap it with white vinyl that has adhesive backing or whatever you want. Very good on time and wallet😊

[@adrielcalder185]

Pretty awesome

[@Rosebuddecors]

Thanks 😊

[@shopcristallz]

You rock. Ty for this

[@tracyporter366]

Thank you for this video save me some money 💰 🙌🏽

[@Lorainevs88]

Wow 😮👍🏻super

[@Rosebuddecors]

Thank you so much 👍

[@QTNicholls]

I absolutely love this!

[@Rosebuddecors]

Thanks 😊

[@nirupachadha6345]

Thank you very much for this tutorial I may just end up doing one for the sake of learning. It will be lovely to have some satin fabric draped over it to Flow loosely. Like pastel shades of baby pink,peach etc on need bases. It will take it to a different level.

[@Rosebuddecors]

Thanks so much for the new idea😊

[@queene813]

Awesome idea!! I will add that to mine

[@karimacintyre8306]

Beautiful 😍

[@shardolltv6250]

this is fantastic! 👏🏾👏🏾👏🏾👏🏾

[@kidrummond2123]

Thank you I will try this!

[@itsjustmenicola4010]

Applause!!!!! I am so going to practice making these.

[@Rosebuddecors]

Thanks 😊

[@jenniferdelcorso8382]

Thanks for this tutorial. Would it be possible to have the link for the white billboard I can't find on the net. Thanks a lot

[@Msbenjamina]

Hello! This is beautiful! Question: Is it sturdy enough to hold a two tier cake?

[@Rosebuddecors]

Yes 🙂 But I cannot guarantee for the outdoor setup. For indoor yes.

[@charitybenewaah4954]

Very beautiful ❤️❤️❤️👌

[@Rosebuddecors]

Thanks 😍

[@7songstress]

This is so smart! Thank you

[@Rosebuddecors]

You are welcome 😊

[@neneebaby9257]

Amazing, Thkx so much!

[@Rosebuddecors]

You are welcome 😊

[@mikkivillajuan5427]

This was the most helpful and satisfying DIY of the cylinders. Can you please do another video for like 3 different sizes too? Thank you

[@Rosebuddecors]

Thx so much 💓

[@yewandeakande8451]

Great and clean job

[@Rosebuddecors]

Thanks 😊

[@hudajassim-hudaandherglitt2071]

YOU. ARE. A GENIUS!!! THANK YOU SOOOOO MUCH!!!!

[@priyadarshidravid6929]

You have steady hand; much better than mine. Thanks for video mate.

[@brittanyclarke4852]

Your a life saver

[@Rosebuddecors]

Thanks 😊

[@RoselineCormier]

love this video. thank you

[@Rosebuddecors]

Thanks 😊

[@wgdispatch9247]

Wonderful!

[@Gourmetkitchen_]

Great job, wats the name of the material you used for this stand?

[@taniriahnivar2954]

OMG! You’re amazing!!! I will be doing this ASAP!!! Thanks love!!! ❤️❤️❤️

[@bakeiticeit]

Can it hold a cake outdoors? It looks light weight to me. Not sure the guests would like to see their cake falling off due to wind blowing off the stand. Any tip on making it heavy?

[@Rosebuddecors]

I used it outside. No complaints so far. May be you can try putting some stones inside of the cylinder when you are making it. But never tried

[@stephaniebreslin3466]

Great idea! Thanks so much !

[@Rosebuddecors]

Thanks 😊

[@fritzferannnbayudan]

Thank you so much! Save a lot because of your video.

[@Rosebuddecors]

Thx so much.🙂 Keep watching

[@samanthakun3008]

This is better and simpler than all other diys!!! What kind of board is this? Pvc foam board or sintra or just foam board? Thanks!!

[@Rosebuddecors]

Thank you. Its Normal foam board

[@GoldenFibre]

amazing, great inspiration

[@Rosebuddecors]

Thanks 😊

[@mrobertaw68]

Wow! Mind blowing 😱💕💕💕💕 thanks for sharing

[@vivianmba2564]

Perfect, exactly what I want, will try to make them this week because I need them by weekend 🥰

[@martinahinojosa325]

Wow that's awesome work, thank you so much for sharing with us you're wonderful ideas.

[@sleighyer]

Love this! What are the measurements of the other sizes?

[@Rosebuddecors]

3ft height and 1 ft diameter of the top circle

[@kenareed1400]

It can't get no creative then that, love the idea

[@jjasminevillanueva6655]

Thank you for this! I was qouted $250 for 3 cylinders. Omg🤣🤣🤣

[@Rosebuddecors]

Glad I could help!

[@nissimusic777]

Am loving this great job❤👌

[@Rosebuddecors]

Thank you! 😊

[@jacquelinegallo1189]

Excellent

[@Rosebuddecors]

Thanks 😊

[@sajilaibrahim4398]

Wow it just awesome 😍😍what u used to roll that stand ???

[@Wavy-Waves]

White poster board. It is on screen in video.

[@shanb5632]

This is the best! Thanks for making a video

[@MotivaTionVibescity]

I will like to know too

[@karimacintyre8306]

👏🏼👏🏼👏🏼👏🏼❤❤

[@RaynAndCoDesigns]

Hey love the video what is the type of cutting tool is this?

[@Rosebuddecors]

It's just regular culling plier from dollar store

[@amenashahid4419]

omg i saw another DIY and it would've costed 50-60 bucks :p this is super cheap !!! definitely going to try it ASAP thank you so much for this just one question - is it strong enough to hold a cake on top and cut it too?^_^ it looks like it but just want to double check

[@Rosebuddecors]

Thanku. Yes its strong enough to put 2 tier cake with the cake stand

[@xxng]

I think if you wrap with nice fabric it would look so nice

[@Rosebuddecors]

Thanks, will try. 🙂

[@rebecabarco6202]

Thank u so much!! Exactly what I need ❤️

[@Rosebuddecors]

Thanks 😊

[@sashaholmes1991]

😩😩 great job

[@Rosebuddecors]

Thanks

[@cristinaflores1408]

Great DIY project. How many pounds can hold up

[@Rosebuddecors]

I put 3 tier cake on it

[@naquannawilson8146]

GREAT WORK DO YOU REMEMBER THE DEMENSIONS OF EACH PIECE

[@Rosebuddecors]

Height is about 2ft. Circle diameter is 1ft

[@roseliagonzales1154]

@@Rosebuddecors as

[@charlenetoranty7467]

Hey, what is the weight limit for these...love it Can they hold up cake on cake stand?

[@Rosebuddecors]

Yes i put 2 tier cake with the cake stand

[@heyytherr8098]

do you have photos of the cake?

[@mrssethsingh7839]

Is doesn’t fall? Coz it’s just a foam board so putting cake stand with cake??

[@cristinaflores1408]

I’m thinking the same can hold a cake?

[@Rosebuddecors]

I am always using this for my decors. My customers put 2 tier cake with the cake stand

[@MotivaTionVibescity]

Can you pls list the supplies used. Thanks 😊. New subbie here.

[@Angie-ci1lp]

Thanks for sharing 👏🏽👏🏽👏🏽 Great idea👏🏽👏🏽

[@Rosebuddecors]

You are so welcome!

[@kimwiggins9655]

Awesome DIY!!! I can do this!!! Thank you!!!

[@Rosebuddecors]

Thanks 😊

[@gino-ilburattino775]

Great video, wath's the panel thickness? Greetings from Italy🇮🇹

[@pudgiecardenas842]

Thankyou for making this diy very helpful

[@mayraortiz7848]

Thanks so much! What do you suggest for making a bigger size in diameter and height?

[@Rosebuddecors]

I use 2 white boards to make bigger diameter ones. But tallest is the white board height

[@patiencekay3672]

Very cool

[@georgiafreemantle7680]

Thank you for this! I don't know the thickness to buy though, as these comes in a majority of thickness.. help!!

[@Rosebuddecors]

Mine is just about 3mm

[@nicolegonzalez3781]

I'm going to do this for my daughter bday thank you

[@anuaduanuadu647]

What they used here😑

[@sgarcia5188]

Thank you for sharing!

[@nadyasitara3442]

❤

[@andioop9129]

Wow thank you so much for this!!

[@Rosebuddecors]

Thanks 😊

[@madhurimadhu9848]

Video is so good but material name plz

[@anitabodom883]

Can you link the materials you used?...are those cardboards?

[@JustSimpleFitness]

That would be helpful for me too !

[@JJ-fs4sg]

Form boards from dollar thick ones and the thin shiny ones they carry both

[@anitabodom883]

@@JJ-fs4sg thanks so much 🙏💕

[@angiesosa6778]

If i want to mke them taler and wider would i just stack the foam board? Or what do i use

[@Rosebuddecors]

You can do, or you can buy taller foam from home depot

[@deborahannfrazier1782]

Awesome...Great Job!💞

[@Rosebuddecors]

Thank you! 😊

[@sanaahmed5811]

Hi this looks fab but what material are you using?

[@Rosebuddecors]

Everything from dollar store. Foam board and poster board

[@archanadiwakar2830]

Where did you get that white poster board

[@tinymetswamere7640]

I like what u've done but i seem not to see what kind of bord u have used

[@naimahassan8784]

What material have you used please put in description would be great help

[@muziq96]

I'm curious of the weight it can hold. Like can I place a two teired cake on it? And be sure it wone fall 😶

[@trinabrown8223]

It says in the comments that it will hold a 2 tiered cake with stand

[@tinasims8482]

New sub here! I like you creation.

[@Rosebuddecors]

Thanku 🙂