Yikes. I'm realizing 10 months later that the title says Matrix PEQ-15 Review. I was working on those two videos at the same time and must have coppied and pasted the intros and not edited them. Lol
@TheRoook4 жыл бұрын
Handguard with gastube look amazing where did u get it? what is it called?
@FandGairsoft4 жыл бұрын
@@TheRoook The Mission First Tactical AK handguard and the CYMA railed AK gas tube. Found the handguard on OpticsPlanet and the gas tube on Evike.
@TheRoook4 жыл бұрын
thanks! great video btw =)
@FandGairsoft4 жыл бұрын
@@TheRoook Thank you!
@thomasbeer15263 жыл бұрын
@@FandGairsoft I have an Arcturus AK, do you know if this CYMA gas tube rail will fit? I cannot find anything online to confirm
@captaincheesepuffs6103 жыл бұрын
Thank you for the rear sight removal guide really easy to understand!
@youngspeaks4 жыл бұрын
thanks for making this vid bro! it helped me a lot! i just ordered the CYMA AK4 CM042A and wanted to do exactly what you did i throw a red dot on it!
@FandGairsoft4 жыл бұрын
I'm glad I could have been of service. That'll be a nice setup!
@Micromation4 жыл бұрын
I prefer dovetail - much much quicker to disassemble and assemble than to screw around with fixed rail on dust cover. Not to mention I like swapping my optics around so having several pre-configured dovetail mounts works me a treat.
@FandGairsoft4 жыл бұрын
Are you referring to the mounts that slide into the rail on the side of the receiver?
@Micromation4 жыл бұрын
@@FandGairsoft Yeah, those. It pains me greately that my new AKM doesn't have the side rail :(
@FandGairsoft4 жыл бұрын
@@Micromation Yeah, those mounts can be pretty versatile.
@BlitzOrange4 жыл бұрын
Doesn't seem to work on the CYMA AK-105 CM.031D? The rear sight was too narrow, tried pushing it in and the sides of it started to curve outward.
@FandGairsoft4 жыл бұрын
Interesting. Could be an issue with the TM spec AKs. Maybe some rotary tool trimming will help fitment?
@кйфарик3 жыл бұрын
Ive been doing some shaving and triming to it, I also had to widen the holes of the ak that hold the rear sight, its a ton of work good luck!
@darth_vader2cool5822 жыл бұрын
@@кйфарик i have the Same Problem, it wont close fully for me when i press the dust cover down.
@Sauron1913 жыл бұрын
Got one of these on my WE AK74pmc .. Was slightly too short and all I had to do was slightly drill the holes where the rear sight was fixed to and it snapped on perfectly!! 👊🏻👊🏻
@FandGairsoft3 жыл бұрын
Great to hear that! I hope it works well for you.
@j.j._4 жыл бұрын
Thanks for the video and advice im getting it for mine 4 sure!
@FandGairsoft4 жыл бұрын
Glad to be of service!
@crackedbull84924 жыл бұрын
Thank you soooooo much I’m kinda new to airsoft and got an ak. My friends said you could put an optic mount on it but the others were bulky. Edit: I forgot to say you got a sub from me.
@FandGairsoft4 жыл бұрын
Thanks for the sub! 😊
@gabsgames7433 Жыл бұрын
thank you very much, it helped me a lot
@Guillo24i73 жыл бұрын
Thanks! I ordered one for my ak.
@FandGairsoft3 жыл бұрын
Awesome! I hope you enjoy it.
@cesarolveraarciniega6742 жыл бұрын
I’m planning to buy one but I’m not sure is gonna fit my cyma AK-105
@FandGairsoft2 жыл бұрын
This should fit it just fine. The one in the video is a CM.040 and the other version available is the CM.047. It'll fit both.
@milat92873 жыл бұрын
After extended use, has it become looser? AK dust covers are kinda famous for being horrible at retaining zero, which is why you typically don't mount sights on them, so just wondering if it starts rattling a bit when it breaks in properly
@FandGairsoft3 жыл бұрын
It will move a very little bit but not enough to make a difference with optics on an airsoft replica. As far as coming lose, it does not as long as you tighten the given screw enough.
@slerpn2 жыл бұрын
I have this dust cover on my cm048m, and the dust cover doesn't wiggle at all. Also retaining zero on an airsoft gun is not really a problem since its... an airsoft gun.
@CsimmonsIIASMR16 күн бұрын
Wasn’t able to screw it on my lt ak103 but it fits on tight enough for me not to need the screw
@FandGairsoft15 күн бұрын
@@CsimmonsIIASMR Interesting. Was the screw just not fitting?
@CsimmonsIIASMR14 күн бұрын
@@FandGairsoft guess so I just hammered it in unti it was in a good amount so I didn’t need to screw it.
@RobloxianFourth Жыл бұрын
If anyone somehow sees this comment: will this fit on a CYMA Sport AK74M Airsoft AEG Rifle ?
@madisonburgers73084 жыл бұрын
just tried installing this on my cyma ak47 and had issues getting the cover over the rear sight holes, and after i did the pin wouldnt fit through them. any suggestions?
@FandGairsoft4 жыл бұрын
If the pin is your current issue, make sure the hole is clear all the way through and lined up properly. If it doesn't fit after that, then you may have to go down to your local hardware store and try to find a bolt and nut set that's smaller in diameter that will fit. I hope that helps!
@meteorsouldennis36764 жыл бұрын
Do you know if it work with a APS-AKS74U because I can't get the normal dust cover of the gun, it doesn't have a screw to hold it and it doesn't have a side mountable rail or screw-holes to install one I hope you can help me out with that one
@FandGairsoft4 жыл бұрын
There is an AKS-74u version of this product made by CYMA. Those dust covers are held on by a rivet-like fastening that won't be able to be reattached after removing so maybe some combination of bolt with the same dimensions and a nut to hold it on would work. The version in my video is not compatible with any AKS-74u.
@meteorsouldennis36764 жыл бұрын
@@FandGairsoft ok Thx for your answer
@CallsignAllfather4 жыл бұрын
Will this work with the CYMA ak105. Reviews on evike says it works but I saw a comment on here saying it doesn’t and now I’m confused.
@FandGairsoft4 жыл бұрын
I don't think there would be any problems. I have it on my CYMA 040 (VFC clone) and it fits with no issues. It should fit on the TM clones just fine as well.
@RSVDOTRKNG4 жыл бұрын
Thanks for the great review, I will se more videos and suscribe I like yout content!
@FandGairsoft4 жыл бұрын
Thank you! I hope my videos help.
@RetlocGaming5 ай бұрын
I got a Cyma sport AK74M, and this is whay my dad chose. Its not really fitting and past return, so I am going to file it down to see if that works and will update. However, does anyone know a railed dustcover for this gun? Dovetail rails don't work (mine didnt come with the mount)
@lwdrd2 жыл бұрын
It fits perfectly over the gun but the part that goes into the iron sights either doesn't fit or its supposed to be a tight fit, so I don't know what to do
@FandGairsoft2 жыл бұрын
You might have to use a rotary tool to shave down some of the material on either your sight block or the hinge on the top cover to make it fit, depending on how tight it is.
@flipalicous1671 Жыл бұрын
think this would fit the cyma 028a?
@axesata Жыл бұрын
My E&L ak has a weird curved piece of metal where the RS slides in and I can't put on the rail. Anyone having the same issue by any chance?
@dudemanguy5172 Жыл бұрын
can you send me you ig or something so i can see a picture of what you mean im also trying to add this to my AK
@axesata Жыл бұрын
@@dudemanguy5172 i already fixed it turns out that little metal thing slides out, im just retarded. When you remove the rear sight you will see what I mean
@dudemanguy5172 Жыл бұрын
Oh you ment the metal leaf spring that keeps the rear sight down yeah its not obvious you can pull them out
@dudemanguy5172 Жыл бұрын
But also that means you were in fact able to put this on an E&L AK because I have a AK-47 without a side rail mount and need something to add an optic
@axesata Жыл бұрын
@@dudemanguy5172 I was but with heavy amount of filing. Seems the metal on the 104 was a bit to thick for the fork in the front. So I had to file the fork a good bunch for it to be able to go in.
@wardjiekАй бұрын
Will this work with CYMA AK47 CM046?
@BlackoutActual Жыл бұрын
will this dust cover work on the CM522C? i would imagine it would since they are from CYMA, but would be a good idea to ask anyway
@porkpie29657 ай бұрын
It should fit all aks that have the standard receiver. So all except aks74u and ak12
@dawdaw8113 жыл бұрын
Will this work on cyma cm.520 ak?
@VetrixOfficial2 жыл бұрын
I’m getting a CYMA 028C, I want to get the replacement body made from steel, because the lower body is plastic, I’m wondering if it is the same colour as that rail replacement, because one of the models is a light grey colour
@FandGairsoft2 жыл бұрын
The color of the top cover is much closer in color to both the steel and the other metal bodies for airsoft AKs.
@VetrixOfficial2 жыл бұрын
@@FandGairsoft thanks
@jhynton952 жыл бұрын
Thank you for you video! my build; Klashknov 60th Anniversary RIF TACTICAL Version Licenced. - Theta Optics Battle Reflex Raised Red /Green dot sight RIF / RAS 20mm Rail. - Nurprol Vertical Grip. - steel dust cover ♡ - 800rd BB Steel Hi-Cap by Cyma AK47 aeg Magazine. - Nuprol 7.4V 1200mah Lipo PEQ Battery & Balence Lipo Charger. 6mm 0.25g P.S.B.T Competition grade BBs 1kg bag.
@FandGairsoft2 жыл бұрын
Nice! I'm glad I could help.
@jhynton952 жыл бұрын
@@FandGairsoft darn it my dust cover doesnt fit and cant screw rod back in on the barrel
@Arai_1172 жыл бұрын
Will it go to CYMA CM045A AKS-74U
@FandGairsoft2 жыл бұрын
It will not fit any AKS-74U unfortunately. There is a similar product out there that will though.
@liamerickson34272 жыл бұрын
Doesn’t move much at all or doesn’t move? Kinda matters if it has any wiggle at all
@FandGairsoft2 жыл бұрын
There is a small amount of movement but for the application of airsoft, the affect on accuracy is negligible.
@liamerickson34272 жыл бұрын
@@FandGairsoft is the rail low enough to be able to see the iron sights through the optics you use? I like being able to switch between the two
@FandGairsoft2 жыл бұрын
@@liamerickson3427 The rear iron sight on the cover is about the same height as the zero'd factory rear sight. If you've got an optic with a high enough mount, you could use both.
@quinnmorgan63033 жыл бұрын
Does this work with the cyma 028?
@FandGairsoft3 жыл бұрын
The VFC and TM spec CYMAs are a little different but I think it should be a close fit.
@lilkook0828 Жыл бұрын
I bought this for my Cyma AK 74 and the screw doesn’t fit
@typer29093 жыл бұрын
Is this compatible with CYMA AK-74 / 100 series?
@FandGairsoft3 жыл бұрын
I know it's for sure compatible with the 040 series of AK from CYMA. I'm unsure if it will fit with other models but it should.
@christiancook50083 жыл бұрын
Do you know if this would work on a cyma ak beta spetsnaz?
@FandGairsoft3 жыл бұрын
It will not. The top covers are different sizes.
@tomaspetrauskas6382 Жыл бұрын
ak-47 jg 0512mg dose it fit this gun ?
@JustT0N3 Жыл бұрын
My AK has a flap of metal instead of a screw and pin, any advice???
@FandGairsoft Жыл бұрын
The flap and pin will be removed for the installation. The screw should have come with the dust cover. Head down to your local hardware store to try to find a replacement or return it to where you purchased it from for one that includes the screw.
@JustT0N3 Жыл бұрын
@@FandGairsoft Thanks
@snakeeyes20a2 жыл бұрын
Will this fit the tokyo marui akm gbb version? Also can you reinstall the rear sight post you removed?
@FandGairsoft2 жыл бұрын
I'm not sure if it will fit that gun but the sight is able to be reinstalled by placing the leaf spring back in place and sliding the sight back into place.
@spook94az83 жыл бұрын
Would this work with the Cybergun Co2 4.5 mm bb air rifle?
@FandGairsoft3 жыл бұрын
If it's the same spec as airsoft AEG AKs, then it might
@Phoenix_OP4 жыл бұрын
Will it fit onto the Cyma AK74M and Tactical AK Beta?
@FandGairsoft4 жыл бұрын
It should fit on the 74M. By AK Beta do you mean the Beta Spetsnaz or the Beta Project AK?
@rolandbioc30244 жыл бұрын
Wish they made one for the ak74u but they only have the side mount rail option for it :(
@FandGairsoft4 жыл бұрын
They're hard to find but I've definitely seen some out there!
@noncomplier53853 жыл бұрын
Can the rail be removed from this dust cover? I want to buy one and weld the rail itself to my original GHK dust cover.
@FandGairsoft3 жыл бұрын
It's held on with screws so it looks like you could definitely remove it. Good luck with your build!
@noncomplier53853 жыл бұрын
@@FandGairsoft Thanks, I got the AKM, installed a plum Magpul kit on it. Love it.
@AceHardy5 жыл бұрын
👑
@Nolonger-q8f3 жыл бұрын
I have a gb ak47 jg ak tactical with that dust cover fit on it?
@FandGairsoft3 жыл бұрын
I don't know at the moment. If I find out, I'll be sure to update you here.
@NezumiSturm3 жыл бұрын
Does it work with a CM.040 ? Don't want to buy it for nothing ! And your video is great !!
@FandGairsoft3 жыл бұрын
Yes, it does! The gun I use in this video is an 040.
@tactan91722 жыл бұрын
great video, but having trouble with the leaf spring just getting in the way, how would you remove it?
@FandGairsoft2 жыл бұрын
Thanks! The leaf is somewhat tucked in to the body so you'll have to pull it up as you pull it out. It's a bit difficult to explain but I'm sure there are other videos on here that explain it better.
@bezumniqbg8612 ай бұрын
Can I put this cover to Cybergun АК-47 Tactical?
@FandGairsoft2 ай бұрын
@@bezumniqbg861 I've been seeing that it won't fit on any 47 models unfortunately.
@rust58574 жыл бұрын
will this work on the cyma CM.48 or Cyma CM.052-S RPK ?
@FandGairsoft4 жыл бұрын
From my experience, it should fit on the 048 with little to no modification. I don't remember if the 052 has a proprietary dust cover or not so I wouldn't be able to tell you.
@rust58574 жыл бұрын
@@FandGairsoft ty m8
@blooregardqkazoo45194 жыл бұрын
Can this be fit to a regular AK?
@FandGairsoft4 жыл бұрын
Not sure, but I wouldn't use this on your firearm. There are better real parts out there.
@ivobreeschoten54424 жыл бұрын
So im seeing you have about the same model ak as i do i have the cm 047D however i have no idea how i can remove the handguards. any ideas?
@FandGairsoft4 жыл бұрын
Nice. I had an 047D back in the day. It might be similar to how the others are removed when you rotate the lever on the trunnion clockwise until it's perpendicular with the barrel and then remove the upper handguard which gives you access to the lower. If that's not the case then you might want to try searching here on KZbin. Hope that helps!
@kingpinstewie49614 жыл бұрын
Do you think this would fit on the CYMA Galil?
@FandGairsoft4 жыл бұрын
It won't. The Galil dust cover is a bit shorter than the AK one, or vice versa. I don't exactly remember, but they're not interchangeable. Also, the Galil doesn't share the same rear sight with the AK. I had a CYMA Galil SAR once and confirmed this.
@kingpinstewie49614 жыл бұрын
DualSectorAirsoft you think with a little modification can fix it? Would it be a big fix or small one. And thanks
@FandGairsoft4 жыл бұрын
If you're looking to put a rail onto your Galil, I'd suggest buying a rail segment, however long you'd like, and tapping holes onto the top of the dust cover of your Galil. That would be less work than getting this dust cover to fit your Galil because it would involve using a rotary tool or something else to do some cutting, that is if the AK dust cover is longer than the Galil one. If it's shorter then there's no real fix for it. I'd just suggest drilling the holes on the Galil.
@kingpinstewie49614 жыл бұрын
DualSectorAirsoft I’ve never thought of that, I’m going to look Into it. Thank you a lot, you’re really helping me out here 👌🏾
@FandGairsoft4 жыл бұрын
No problem dude. Good luck with the build!
@stuclarke17803 жыл бұрын
Do I need to remove the leaf spring underneath the sight?
@FandGairsoft3 жыл бұрын
I's suggest removing it as well so it doesn't get lost.
@BFLD-mr5uz Жыл бұрын
Anyone wondering this fits perfectly on an cm.040 ( aks-74m )
@hunterwarren5349 Жыл бұрын
Mine didn't come with the screw was it ment to?
@FandGairsoft Жыл бұрын
It should have. I'd report that to whoever you bought it from. The only other solution would be to source a screw from your local hardware store or if you have one already that fits.
@hunterwarren5349 Жыл бұрын
@FandGairsoft ok, I'll fabricate something
@Soldier_tf2_for_life2 жыл бұрын
Will this fit on a cyma cm028 ?
@FandGairsoft2 жыл бұрын
According to some other viewers, it will not.
@KharaGosa8 ай бұрын
can you also put it on a Cyma CM028 AK47 type?
@specialman26098 ай бұрын
did u buy it to find out im wondering exactly the same thing
@lilpohan9122 жыл бұрын
Will this fit a dytac slr mb47?
@FandGairsoft2 жыл бұрын
I'm not exactly sure. I'll update here if I find out in the future.
@hateasberry2 жыл бұрын
Will the railed duct cover fit an actual AK47
@FandGairsoft Жыл бұрын
I'm not sure.
@trhobbies93829 ай бұрын
Dose this work on Tokyo marui AK storm ngrs
@쏘지마윽4 жыл бұрын
Can it be mounted on cm028?
@FandGairsoft4 жыл бұрын
The VFC and TM spec CYMAs are a little different but I think it should be a close fit.
@Winter124182 жыл бұрын
do you keep the rear sight spring in when installing?
@FandGairsoft2 жыл бұрын
No, it should be removed, but it would be a good idea to keep it in a safe place in case you'd ever want to switch back or use it as spart parts later as the sight springs are difficult to find.
@Winter124182 жыл бұрын
@@FandGairsoft alright I have a LCT railed dust cover on my Ak but the wobble is fucking killing he and there’s like no videos on the lct one and my gun used to have the cyma railed one and it also wobbled. I figured I’d ask maybe that spring keeps it in place before I bought a new dust cover
@FandGairsoft2 жыл бұрын
@@Winter12418 Got it. The most simple way I've seen the play eliminated from the hinge is with very thin washers, and you'd want them about the thickness of a gearbox shim. That should help control the wobble a lot better.
@Winter124182 жыл бұрын
@@FandGairsoft Awesome thank you for your responses!
@FandGairsoft2 жыл бұрын
@@Winter12418 No problem. I hope it works out!
@dv13op Жыл бұрын
Would this fit on a g&g ak?
@fazstar49134 жыл бұрын
Hi, do you know if this will work with the E&L AKM ?
@FandGairsoft4 жыл бұрын
I don't know unfortunately. I'm sorry. I've only tried this on the CYMA that I own.
@dragonsally19272 жыл бұрын
Hey, have you tried in the meantime?
@dudemanguy5172 Жыл бұрын
@@dragonsally1927 did you ever find if it fits on an E&L
@dragonsally1927 Жыл бұрын
@@dudemanguy5172 nope, I did not found out.
@dudemanguy5172 Жыл бұрын
@@dragonsally1927 I found out, one guy says he was able to do it on his E&L after cutting off some of the metal and I will be testing his word in 1-2 months
@Thao102954 жыл бұрын
What are the handguard rails are you using?
@FandGairsoft4 жыл бұрын
It's the Mission First Tactical Tekko AK handguard.
@Thao102954 жыл бұрын
@@FandGairsoft and the top rail?
@FandGairsoft4 жыл бұрын
That's the CYMA railed gas tube which is a clone of the Ultimak railed gas tube.
@misterman15713 жыл бұрын
Would this work on a CYMA CM-028?
@FandGairsoft3 жыл бұрын
According to other viewers, it will not.
@misterman15713 жыл бұрын
@@FandGairsoft would you happen to know of some sight attachments for it?
@FandGairsoft3 жыл бұрын
You could try this: gunfire.com/en/products/ris-rail-for-ak-rear-sight-base-1152214748.html Or this: www.google.com/search?q=ak+rear+sigt+ris&client=ms-android-hms-tmobile-us&prmd=isvn&sxsrf=ALeKk01yf2-iLXe7Shoxh15xDlPfPMvX8g:1623685938152&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjppMe8vZfxAhUTip4KHVylCCkQ_AUoAXoECAIQAQ&biw=412&bih=751&dpr=3.5#imgrc=MF00rInEjUkBfM
@splashkid84103 жыл бұрын
Could this work on a we’ll ak74u
@FandGairsoft3 жыл бұрын
I'm not sure. I haven't found any results on the internet about it either.
@paysung73325 жыл бұрын
Does it fit on a AKMS GBB ??
@FandGairsoft5 жыл бұрын
I'm not sure. Wouldn't hurt to try!
@darkNovaskar3 жыл бұрын
Is this compatible with the ak74?
@FandGairsoft3 жыл бұрын
Which make and exact model do you own?
@darkNovaskar3 жыл бұрын
@@FandGairsoft the wells ak74 gbbr I'm going to use the 74s dust cover for my E& L ak47 aims aeg because it's dust cover is hard to put back on after the battery is in.
@FandGairsoft3 жыл бұрын
I had no idea Well even made an AK74. That's pretty cool. Unfortunately I have no idea if it will work with that.
@lockersf49875 жыл бұрын
Will this fit and work with a real ak?
@FandGairsoft5 жыл бұрын
I have no idea. I wish I had a real one to test it with though. 🤔
@user-fq8dc8fe3n4 жыл бұрын
dont put it on a real one, go with zenit.
@Fo4assaultriflefan924 жыл бұрын
I wouldn't use a dust cover rail for optics on a real ak. Recoil will make your sight lose 0 quick. You're better off with a gas tube picatinny tail.
@nirvana778114 жыл бұрын
Look up TWS dust cover for a real AK
@nirvana778114 жыл бұрын
I use midwest armory rail on my yugo holds zero, also RS regulate are nice, check out ak4774 union KZbin page for AK info
@datsan62113 жыл бұрын
Can it use for WE AK 74 PMC GBBr bro?
@FandGairsoft3 жыл бұрын
I'm really not sure. I'm sorry. I tried to research it but couldn't find any results.
@Sauron1913 жыл бұрын
I bought one for my WE AK74pmc. It’s slightly too short (Only by a couple of milimeters BUT TRY IT FIRST). All you need to do is take the rear sight off as shown, get a drill with a bit the same size as the holes, cut the holes back a bit towards the stock (BE AWARE you don’t need to do it that much so do a bit then check etc) and then it will snap on perfectly ... It took me around 1-2 mins at most with little effort once I had the elevation/rear sight out 👊🏻👊🏻
@KaLNFoRc3R4 жыл бұрын
Where can I get the screw from?
@FandGairsoft4 жыл бұрын
The screw comes with the dust cover but I'm sure you could get a similar one from a hardware store.
@KaLNFoRc3R4 жыл бұрын
@@FandGairsoft Damn, mine didn't had one and now i'm looking for what to put in there.
@FandGairsoft4 жыл бұрын
Dang, that sucks. I'd recommend taking the dust cover with you to whichever store you go to and try to find a screw that fits.
@KaLNFoRc3R4 жыл бұрын
@@FandGairsoft Good idea, just got back from the store and found the one that fit perfectly - 4mm x 25mm, thanks.
@FandGairsoft4 жыл бұрын
Awesome! I hope it serves you well.
@ewokshoterz3 жыл бұрын
Will this work on a KWA Akr-74m
@FandGairsoft3 жыл бұрын
I don't know but I'll update here if I find anything out. 👍
@undeadartix03813 жыл бұрын
hi does anyone know if this would work on the cyma Galil?
@FandGairsoft3 жыл бұрын
The dust cover shapes are too different for it to work, unfortunately.
@S3nT3nC3GCG4 жыл бұрын
thanks!
@420shaman68 ай бұрын
Anyone know if this works on lancer tactical Ak47 ris model?
@srgmillersoldier Жыл бұрын
How i can do this in AK 74 u?
@FandGairsoft Жыл бұрын
Unfortunately, this will not fit. However, there are other items on the market that will.
@barnardstudios92542 жыл бұрын
Does this work on a cm .028?
@FandGairsoft2 жыл бұрын
According to other viewers, it will not.
@barnardstudios92542 жыл бұрын
@@FandGairsoft any suggestions the plastic dust cover flexes alot with the riser I got on
@FandGairsoft2 жыл бұрын
Are you looking for a more solid optic mount? I know there are some out there that attach to the rear sight block that might work better for you. Otherwise, you could try using some material to shim between the top cover and were it fits onto the rear sight block to prevent it from moving as much.
@wantdatcadpat443 жыл бұрын
Does anyone know if this would work on a KWA AKG-74M gbb? I know this is for AEG but I'd still like to know
@vojinhonza1506 Жыл бұрын
Probably yes but depends on hole on AK rear sight too small take drill
@nikolakolev545 ай бұрын
Anyone know if it would fit on CYMA - CM 040I?
@FandGairsoft5 ай бұрын
If it's any variation of the full-sized AK-74 or AK-100 series, then it should fit.
@FTW4LIFE10003 жыл бұрын
Does anyone know if this will work with JG aks too?
@NtaksAKAKevin4 жыл бұрын
Lol I wish I saw your video before trying to put it on I almost too kthe whole gun appart just to remove the front sight 😂. My AK is the cm 520 and it need a little bit of filing in the front for it to fit
@FandGairsoft4 жыл бұрын
Ah damn. Well hey, at least it'll fit with just a little modification! Glad my video helped!
@isaiahcagurangan58314 жыл бұрын
I have the same gun and I need to do some filing to fit on too
@ZaferToycu2 жыл бұрын
i installed the screw on the wrong side, now its stuck!!!
@FandGairsoft2 жыл бұрын
You'll have to back it out gently or else you'll break the screw. Hopefully it works out for you.
@ZaferToycu2 жыл бұрын
@@FandGairsoft fixed it, just pulled on the dust cover really hard from the right and i was able to remove the screw so easily
@TomasStorm3 жыл бұрын
Valid for ak74 e&l?
@mp3nerd313 жыл бұрын
I can't find this in stock anywhere, and I'm also trying to put it on my e&l!
@FandGairsoft3 жыл бұрын
I've got no idea unfortunately.
@dragonsally19272 жыл бұрын
Any updates in the meantime?
@jman121911 ай бұрын
Does not fit E&L Ak 74 for anyone wondering (found out the hard way)
@CorgiHatGuy2 жыл бұрын
Hey! Does this fit on the cm039c? Thanks
@FandGairsoft2 жыл бұрын
According to Evike, it will fit both TM and VFC spec AKs, as long as you remove that existing rail on your gun, I don't see why it wouldn't work.
@ricardorodriguez1278 Жыл бұрын
How in the hell was it so easy to take off… you made it seem like it was nothing
@FandGairsoft Жыл бұрын
I've been around AK platforms since I started playing airsoft over 10 years ago, so tons of practice. Lol
@ZeroSub12344 жыл бұрын
Will this work with PSA-AK47
@FandGairsoft4 жыл бұрын
It's really meant for airsoft so I wouldn't suggest it.
@robgrady37662 жыл бұрын
Will this fit Ak74 I’m in Ukraine
@FandGairsoft Жыл бұрын
Airsoft, it depends. A real one, I'm not sure.
@usmcgrunt_19443 жыл бұрын
In essence, this basically Krinks the dust cover on a full-size AK (you know what I mean if y'all have seen a Krink dust cover 🤣🤣)
@FandGairsoft3 жыл бұрын
You're right! It's pretty similar mechanically and is probably one of my favorite AK accessories to date.
@Dave-yg8jj4 жыл бұрын
If anyone has tried adding this exact one or one off Alibaba to a real AK 47, please let me know.
@RealEyes24 Жыл бұрын
it is made of aluminium not steel!
@FandGairsoft Жыл бұрын
Mine was indeed made of steel.
@gizmus1185 жыл бұрын
It doesn't fit :C
@FandGairsoft5 жыл бұрын
That's unfortunate. Which model did you try it on?
@gizmus1185 жыл бұрын
@@FandGairsoft My bad i can do this.I was trying to put it in 1-1.5h,but i did it. Ps:cm0.28 :D
@FandGairsoft5 жыл бұрын
Nice! Should be a pretty easy install on any CYMA AKM or AK74M body.
@haiuuu75 жыл бұрын
@@gizmus118 HEY! :D I got a cm.028c, and been looking for one of these, the taiwangun said it wouldn't fit, if you made it fit can you tell me how? :O didn't understand the 1-1.5h
@Piefaic3 жыл бұрын
I just picked one of these up for my cm040k and the screw they gave me doesn't even fit through the holes and it's also a double sided charging handle dust cover so the entire left side was completely uncovered. I love cyma but damn this was pretty disappointing.
@FandGairsoft3 жыл бұрын
Ah, seems like they sent you the wrong product.
@kolttiat44163 жыл бұрын
Does it work with the Cyma CM 0.28S?
@FandGairsoft3 жыл бұрын
According to some other viewers, it won't.
@SirQuacksalotthe1st3 жыл бұрын
Any clue if it would work with a lct ak74 ?
@FandGairsoft3 жыл бұрын
I'm not sure. If anything changes I'll be sure to update this comment.
@animedxd154 жыл бұрын
Would this fit on Cyma cm046?
@FandGairsoft4 жыл бұрын
TM and VFC spec AKs are slightly different but it should fit.
@carabinecobra76214 жыл бұрын
Will it fit on the lct akm
@FandGairsoft4 жыл бұрын
I'm not so sure but I know LCT and VFC-spec CYMA are pretty similar.
@barns88743 жыл бұрын
Would this fit aks74u
@FandGairsoft3 жыл бұрын
It will not. It will only fit full-size AK receivers only.
@Streethawk1219 Жыл бұрын
Does this work with the CM047C?
@user-fq8dc8fe3n4 жыл бұрын
does it fit on an E&L? thanks.
@FandGairsoft4 жыл бұрын
I don't know unfortunately. I'm sorry. I've only tried this on the CYMA that I own.
@dudemanguy51724 жыл бұрын
Did you ever find out if it fits on a e&l because I want to put rails on my e&l as well
@FandGairsoft4 жыл бұрын
@@dudemanguy5172 Sadly, I don't own an E&L and I don't know anyone who does so I'm not able to test that. You could always buy it and try it on and if doesn't fit, return it!
@dragonsally19272 жыл бұрын
Hey, any updates? Anyone tried?
@connorshelton71493 жыл бұрын
Will this cover work on a CYMA Galil SAR?
@FandGairsoft3 жыл бұрын
It won't, the AK top cover is too long for a Galil. Plus the Galil lacks the AK rear sight base.
@connorshelton71493 жыл бұрын
@@FandGairsoft Thank you
@karmenkorosec58902 жыл бұрын
Does this fit e&l akms47 essential?
@FandGairsoft2 жыл бұрын
I don't know for sure. If I find out, I'll be sure to update it here.