DabPress Rosin Press review and test! New channel!

[@rfryanfoster]

Nice jar spin. Just bought mine on Amazon for $365. Can't wait!

[@rambozo_fpv176]

Nice. I did a lot of research and settled on the exact same one. I am loving it. Pressing rosin like making a pot of coffee. :D 6:35 the legs are actually meant to allow the rosin to drip out onto the silicon mat. Might be fun to put something cold under the mat.

[@theelevatedislander5015]

Great advice, Thank you!

[@austinblackmore317]

Another grower here looking to get into rosin, very informative video and I also have to give you props for the perfect jar spin 👌

[@theelevatedislander5015]

Thanks Austin! Happy pressing!

[@AndrewSteffenHB]

This Is A Quality Channel, Thank You For Putting In Effort!

[@CannaBeardGrows]

im #8 grow bro. Welcome to cannabis youtube mate I own the same press and I love it still nice and solid almost a year of use

[@rambozo_fpv176]

#Team6Ton Lol.

[@rambozo_fpv176]

@GC_T.W.O_TYME THE GREAT, RICH AND POWERFUL I do share some rosin content on my Instagram. Press on, brother!

[@mykhaylouka4472]

Hey if you don’t mind me asking how good is the average yeild percentages and if you’ve upgraded since.

[@drewzeegrows]

I just bought this! Glad I watched this after made me feel much better about my purchase:)

[@Tampa7]

Hey Guy, love your channel! Thanks for this vid, I was leaning towards getting this one and you confirmed it for me, cannot wait!!

[@theelevatedislander5015]

Thanks man, You will be happy with it! Cheers!

[@gillianj1801]

Great video very informative! A whole new meaning to the word ‘squish’ 🍁

[@coopercrepsl]

Cannabis build videos? Hell yeah! Subbed man, thanks for the review!

[@jkeefe4208]

Looks great you did a great job brother it’s super fun isn’t it?

[@growaway3321]

The legs are for a directional press. Shoulda put the parchment facing the other way. Then tilted, pressed and left to drip.

[@levicravens5428]

I had the same thought but wasnt sure. Im new to this. Been pressing with handheld press..called The Ju1ce Box ..(glorified hair straitner), this should be a major upgrade.

[@rickshiandmoku4128]

I'm definitely sold on this press time to start saving

[@armysirbaugh]

love this review ive been thinking about getting one and not a lot of videos that I could find.

[@christophermoltisanti4776]

Those are drip tech legs. Not sure about back then, but now the 6 ton comes with 4 driptech legs so it sits evenly on them so you can drip right onto your dab mat.

[@jbzieg9677]

The legs are to creat food grade rosin....turn the parchment paper around and 'dip' the machine and leave it there as you squish. Parchment below and let gravity take the goodness down.

[@jkeefe4208]

Just got my own 12 tone deaf press the other day super excited

[@xhellabentx]

Also you wanna weigh your product in and out so you can keep an idea of how much your yields are per strain and amounts

[@slackn2475]

Great content man, lucky 13th sub! Look forward to more from u brother!

[@theelevatedislander5015]

Thank you for the feedback new videos coming in 2020!

[@jacksmith5669]

The rods are to be on the front, to drop down on table. To keep fresh.

[@Bellphorion]

Fellow british columbian, glad to find the channel.

[@dustintrimble6893]

I just pressed 8 grams of Gorilla Glue with that same exact press. I pressed one gram at a time at 210. I got exactly that out of the first 4g didn't use a bag

[@maxwelladams5114]

How much was ur yield?

[@gazorpazorpfield9190]

Nice jar spin around

[@xhellabentx]

What you do is lower it down about half mass and let it heat up for about a minute then slowly squish the liquid gold out and your welcome

[@TNBNaturals]

This is amazing love your channel and what you are doing! Let’s work together

[@joshthompson118]

Ever use the bottletech method?

[@colinyoung2790]

How much flower did u put in there

[@alankosakowski2974]

How long do you press the weed for to make wax?

[@raczyk]

Does DABPRESS have newer units versions?

[@Wide_leaf_indica710]

Yup

[@dmathis510]

Hey I have a question. I bought a similar unit. I noticed the top plate doesn't get as hot as the bottom. I noticed this with one of those lazer heatgun. Is it normal for them to be two different temps even when they are set to the same temp? Im seeing a pretty big variance. Bottom seems right but the top is off by like 50 degrees fahrenheit. I noticed yours seems to pretty much be spot on. Is there something I can do to fix this?

[@theelevatedislander5015]

Hey, thanks for the question. It isn't normal for them to be off by more then just a couple degrees. So if you're seeing a difference of 50+ there's an issue. It could be as simple as a calibration issue or bad connection or heating element. I would definitely contact the company to see what they can do for you. Cheers!

[@dmathis510]

@@theelevatedislander5015 turns out it was just my thermometer. It was hitting the plate and giving me a false reading due to the angle I was aiming at put a fresh battery and rechecked today. Plates are now like you say only a few off. Got my materials ready to start squishing tomorrow. Right now my RH is at 62% on some stuff iv had curing for about 5 months. Trying to get it about 66ish so I sprayed the lid of the jar and should be ready in the morning.

[@dmathis510]

Oh and thank you for replying

[@mykhaylouka4472]

Hey man I have a question!!! I’m looking to buy this but seeing this video is over a year old do you still recommend this press ans if so are the average yield percentages good ?

[@theelevatedislander5015]

Yes I definitely recommend this press, it's held up really well for the past couple years. Goodn yields!

[@levicravens5428]

Bought one today thanks for the content

[@RandoDred]

@@levicravens5428 they are out of stock ugh

[@levicravens5428]

@@RandoDred Suck for you bud! I got mine in two days. Works great! Use mine every week!

[@SmokinPurple502]

I'm about to order a 12 ton anyone have that one ?

[@plainandsimple6346]

You have had about 4 months of use from the 6t. What are your thoughts now, still love it?

[@theelevatedislander5015]

It's been great! Lots of use and zero issues from the unit! Posting an update video next week, come back and check it out! Cheers

[@raczyk]

How many ton do you need to press bubble hash?

[@Wide_leaf_indica710]

Not many.

[@cheflife420]

How u like it now after a little time to use it looking at getting it thanks

[@theelevatedislander5015]

Its a great press! It's pretty basic, but has consistently proved itself. Built like a tank too!

[@xhellabentx]

I also recommend you making kief first and keep it fresh and frozen as possible to make your rosin as high quality as you can

[@theelevatedislander5015]

No issues for me, its been a great press for the past couple years!

[@brandtnicholson4532]

How do you get the jack to go down so easy? Mines stuck closed

[@ReactionzTBE]

hows it holding up still, ever had any issues with it?

[@theelevatedislander5015]

No issues at all, always fires up and stays within a couple degrees! Cheers✌

[@mattske5286]

Try using a 160micron or even go as low as 90 micron instead of the 25micron which is reserved for bubble/hash and kief shake... Keep it up dude..

[@jerkboy58]

would you say using a higher micron count would allow for more yield?

[@mattske5286]

XIMADEIT check out NUGSMASHER there ahead of the dab game by far. They say 25mc is reserved for kief/hash or for making THCA. 90-120mc bags are for dryer material and for THE STICKY ICKY use a 120-160 U could go as high as 200mc but iv rarley ever seen that size used...

[@mattske5286]

I'm keen on buying that same press I own a DULYTEK DHP7-v3 7Ton but can swap it out for a 10ton. What's the max pressure on the DAB PRESS ??? 6ton never mind

[@TheDrizzykush]

Lol, if you want the max yields use those higher micron bags. If you want better quality, but smaller yields use 25-37U. This has been covered by many legendary extract artist, and the results speak for themselves. I for example pressed some blueberry muffins, the difference was about 1%, but the 37 shit on the 90. Both are fine, but higher quality will be less yields, if you're pressing your own don't cheap out. I know these comments are old, but this is for anyone coming across this after. also max pressure is not always better, I go up to about 1400 PSI max, so do many other extract techs. Happy dabbing everyone

[@wayniac917]

Awesome vid but why so fine of micron bag? Most use a 120 or even a 90 unless they're using kief.

[@theelevatedislander5015]

Thanks for the question! You are right most use a larger micron bag. I'm just messing about with different set ups, Cheers!

[@linteastwood7477]

The fine micron bags are perfect if you wanna make your own carts. Press at slightly lower temp. I’ve got the same setup, and press 2-7g pucks at a time.

[@kevinsteele8987]

Really bad idea using wood for your canopy screen frame. There's a reason everyone uses pvc... I'd change it out if you don't wanna breed mold in your room

[@collosaltitan6466]

did you press it again ? feel like you should get more then a gram off 5 grams with that press

[@jerkboy58]

@notchjohnson1 so you used 5 grams of flower?

[@raynorris6497]

I've had one of these for some time now...works very very well. Try the "puck" method with your bags...much better return 15% better.

[@web3twon]

Im about to order one, do you still pre press the bud using a mold?

[@raynorris6497]

@@web3twon no just look up the "Nugsmasher" videos. The guy goes through how to set up the bag.

[@Wide_leaf_indica710]

If you actually know what your doing, it dont take any arm strength. I use my finger for the most part. It shouldnt take so much that it rocks or needs turned on its side.

[@CannaBeardGrows]

but just an FYI thats a hash pre-press and hash micron bags, u want the 160 and those cylinders presses are made for flower and they pare em with bags I highly recommend that combo for flower over this.

[@dabin2065]

Is that why he didnt yeld as much?

[@Beast-mf7br]

@@dabin2065 he got 20%...how much more are you looking for?

[@maxwelladams5114]

Use round ones for flower?

[@dedwards0117]

why dont you put the material in the bag first then pre-press it?

[@theelevatedislander5015]

I do now, way easier!

[@dedwards0117]

@@theelevatedislander5015 Cool!!

[@kloostee]

Experiment, try the bottle tech way and not pre squishing your bud.... everyone has there own way but I'd screw with temps and different way to squish for best results!!!! Great review hope u keep the channel going

[@kloostee]

@notchjohnson1 I'll have to try both ways when I get my press to see for myself

[@kloostee]

@notchjohnson1 fair enough and I hear bottle teck is better all depends on where we are reading our stuff lol

[@k612z]

So after months of ownership would you say it’s worth it??

[@theelevatedislander5015]

Absolutely worth it!

[@djbarela4]

Should i get this press or low temp platea

[@linteastwood7477]

Good video bud!

[@theDTP]

Is this the 4 ton starter press?

[@theelevatedislander5015]

This one is the 6 tonne! Cheers

[@biker9835]

Your going to want to stuff the filter bag with the bud then put it in the small press then the big press the smaller the spaces in the filter bag the better

[@theelevatedislander5015]

Completely agree!

[@BigFarm_ah365]

Make dry sift, then press👍

[@joshbaker6488]

@Cannabis Garage B.C New subscriber here. I am about to order the dp-bj4t35. It's well within my budget actually a little under and I can upgrade the jack later. Any thoughts would be appreciated...

[@janettepilkington7832]

That jar did a dreakdance lulz

[@CannaBeardGrows]

and u put the legs on the wrong side, its to tip it all forward to run with gravity, you will NEVER need that much pressure on cannabis.

[@thewizardoftech5075]

thats not true. the legs are for the back. and the more pressure the better.

[@Wide_leaf_indica710]

@@rbod5886 they call it a drip tech bar in the book that comes with the press! Wtf are you talking about? Also too much pressure can definitely ruin rosin and also fuck the press up!

[@rbod5886]

@@Wide_leaf_indica710 whoa. I do not remember posting this. Thx for commenting so I can remove bc… wtf.. might’ve gotten hacked/had someone commenting on my behalf somehow. Yikes.

[@xhellabentx]

Good fresh kief will produce about 50 % yield or better if your just squishing buds about 15 %

[@JGzyOG02]

Use less pressure

[@silverdawn2767]

Looks like crap

[@theelevatedislander5015]

Great comment, thank you!