Daikin Mini Split Ac Not Cooling Despite Good Refrigerant Pressure

[@roberto2862]

Thanks for your suggestions!!! You have saved me a lots of money!!! I have Daikin 3mxm52 3 split and it was not cooling and sometimes it would turn off and on again every 20 minutes. So i bought a cheap Manifold Gauge to check my suction line pressure and it was only 150 PSI, so i tried adding some refrigerant ( R32 ) to reach 180 PSI and its cooling AGAIN!!! My little Daikin has 9 YEARS so i hope its only a small leak 😁 Thank you again my friend!👍

[@forevertechenglish]

Great My video Helped you, Your Comment is going to be pinned.

[@Heraiz]

Which Gas are you using in this video? That would help us know what your talking about.

[@forevertechenglish]

R-410a refrigerant

[@Heraiz]

@forevertechenglish Thanks for your reply, I'm working with R32 currently at 34c ambient....Just found out the section side needs to be at 180-190 psi....Lots of conflicting information online about the R32 working pressure.

[@ahadakbar8501]

Sir mere pass Dawlance ka 1 ton inverter ac hai Start bilkul sahi hota hai 6 amperes tak max jata hai lekin phr 5 minutes Baad hi 2.5 ampere pe ajata desired cooling reach kiye baghair hi aur phr 2.5 amps pr hi chalta rehta jis ki waja se cooling Boht slow Hoti.. Kya reason ho sakta iska

[@kareemhameed4042]

This is insightful.

[@forevertechenglish]

ok

[@khelix23]

My AC console expelled some ice pieces and I turned off, 12 hrs later I turned on but isn’t cooling, the fan is working.

[@medankia8003]

Hi there, I was working on one 2 head. On my ambient 70 f my low side only 90 f. Name plate state 8 lbs refrigerant on the unit. So i have to charges to 175 psi? Im working on daikin inverter heat pump

[@rey2mespere282]

I experience this kind of trouble. What is the cause this problem. Please give me the solution

[@forevertechenglish]

I have already explained in the video

[@danduder]

Where in the video is the solution?

[@davidbutters5563]

Check pressure.. increase upto 175 psi.. call a tech and explain

[@hackintoshyou6131]

need 175 psi thats what he said the solution

[@Rogue_User]

This pressure is universal regardless of hp?

[@forevertechenglish]

No it is not universal, this the pressure only for daikin air conditioners

[@HARD2BELIV]

u mean it was lack of refrigerant if my running pressure is jaz 120psi-150psi and i need to make it 170psi? im using r32 refrigerant...

[@forevertechenglish]

Yes

[@HARD2BELIV]

im using r32 refrigerant...

[@forevertechenglish]

Yes the pressure of r32 and r410a are the same.

[@budikoimaniakkk2143]

@@forevertechenglish does this rule also can be apply to 12,000 btu (1.5 HP) R32 standard mini split??adding refrigerant pressure until 170-175psi?

[@horsinurbanfarmer9679]

What have you done