Daikin mini split system installation.

[@HVACUncensored]

Amazing brother. Looks beautiful Juan. I love your videos how you do things right man and don’t skip steps.

[@theairconditioningguy]

Right on! Thank you! 👍

[@pabloramirez3489]

Excelente trabajo muy professional, como los de mas que siempre nos muestra en su canal gracias por compartir sus videos saludos desde Tampa FL.

[@theairconditioningguy]

Gracias por veer mis videos!

[@snake6998]

Super clean install as usual, good job.

[@theairconditioningguy]

Thank you for watching!

[@deloct]

Great work Juan. Gracias. Thank you for sharing.

[@hsulli6715]

Awesome job. Nice to see someone else using a torque wrench 👍👍

[@theairconditioningguy]

Really?! Ha ha!

[@MrTunaVic]

That installation was spot on,fantastic job! Cya Tuna Vic

[@theairconditioningguy]

Thank you big tuna!

[@scottreid4170]

Looks good and thanks for sharing! Why not use a tubing bender on the ground with the unit off the wall and then re-hang fishing it through with pre-bent lines?

[@theairconditioningguy]

Great idea! I'll try it next time. Thank you for watching and for that tip!

[@philltafolla]

Looks super clean , diggin the Spanish. Se puso interesante. Good stuff .

[@theairconditioningguy]

Gracias!

[@philltafolla]

The Air Conditioning Guy keep em coming 😃😁

[@TheGgin]

Good to see you posting videos again! Great install, nice and clean. yes, that first 90 out of the fan coil is always my worst fear of kinking etc. for the larger Mini-splits with the 5/8" vapor lines. You get spoiled with the 3/8" ones! Hey where's the nitro? haha 😂😂. Take care and keep them coming.

[@theairconditioningguy]

Thank you for watching! I'll try and get one out at least every Monday. THAT'S RIGHT I didn't show the nitro. 😆

[@TheGgin]

I was just giving you a hard time! :-)

[@danielzamora3625]

Nice clean installation 👍🏼

[@theairconditioningguy]

Why thank you sir!

[@arthernandez1363]

Good clean profesional installation. Can you explain how to secure the roof curve into the roof. Thanks.

[@theairconditioningguy]

Lag bolts and roof cement. Thank you for watching!

[@dizziedallas]

Real nice job Juan!

[@theairconditioningguy]

Thank you!

[@PaulHVAC1]

Nice professional tidy installation👍Cheers!!

[@theairconditioningguy]

Thank you!

[@dtechlogic]

doing research on the mini split. So this will work for a two story house with 4 bedroom on the 2nd floor and living room and kitchen on the 1st floor.

[@theairconditioningguy]

Yes it will. It's especially good for 2 story homes

[@josbrun]

I remember when the lines used to have the bending springs on them.

[@theairconditioningguy]

RIGHT!? What happened to those?

[@MarcelHVAC]

@@theairconditioningguy Sometimes they are still there when you pulle the insulation of the indoor unit. For the case it would be great for bending .

[@kcomfortsystemshvac7060]

JUAN,,,nice work,,,,in those mini split,,,you do check the Superheath you don’t you put temp probe ? If you do ,,,what should be ?

[@theairconditioningguy]

All it says to do is check temperature split. Charging should be done by measuring line set and weighing it in.

[@nestorcorona8901]

Hola buen vídeo. Puedes decirme de cuántos BTUs es el aire que instalaste ?

[@theairconditioningguy]

Si claro! Es 24,000

[@admar6272]

@@theairconditioningguy me podrías decir que mounting stand usaste ??gracias!!!

[@theairconditioningguy]

Use esta: store.acpro.com/universal-curb-rc-102-adjustable-roof-curb-black-68-5-x-22-33914 También la venden otras tiendas, no solo AC Pro.

[@admar6272]

@@theairconditioningguy muchas gracias!!!

[@Sctronic209]

Very nice install

[@theairconditioningguy]

Thank you!

[@carolewarner101]

Looks like they did a great job. Part of description in Spanish only so I couldn't understand all they were explaining. Good argument for learning a second language... Oh well.

[@theairconditioningguy]

I'm sorry! I was explaining to my friend how to do the flare and how to use the torque wrench. 🤣

[@MrAzious456]

I enjoy your videos, however you skipped over the whip and wiring. Could you offer any clairification on that. Either on the inside unit or outside?

[@theairconditioningguy]

That's because these are not how to videos. With these videos I'm just trying to show potential customers the process and the end result. But as far as the wiring goes it's all in the installation instructions. Power goes to the outdoor unit then that one powers the indoor unit plus there's a communication wire that's all in the instructions. It's really quite simple.

[@MarcelHVAC]

Great work! I have the same torue wrench and i like it very mucht. Although mine has a scale with Newtonmeter, since you are in Cali it will be foot pound right?

[@theairconditioningguy]

Exactly. Feet or inches

[@erwinbenally8027]

Nice job! You do excellent work. Do you have any problem with the rack bolts coming loose and where did you get it?

[@theairconditioningguy]

The nuts are a type of lock nut, so they don't come loose easily. Thank you for watching! US Air Conditioning distributors sells them here.

[@josbrun]

I wonder, Juan, would it help if you run the line set to the left? Use this hole just for the drain and drill another hole on the left side and route the line set through there?

[@josbrun]

I’m asking because I have the exact same job coming up this week. I value your opinion.

[@theairconditioningguy]

@@josbrun That means I'd have to make two holes.

[@josbrun]

The Air Conditioning Guy Yes, but you can bend the line set using your bender, and you make your connections inside! You make one smaller hole for the drain only, and 3” hole for the line set. I think I will try to do it that way. I’m afraid of putting a kink on the line.

[@theairconditioningguy]

@@josbrun Makes sense. Post a video!

[@sonnywolf383]

Very professional I saw people tied the valve without torched wrench which was not professional, I live in LA can you do my house? Juan amigo

[@theairconditioningguy]

Thank you! Where in LA? I'm currently booked solid until September though.

[@fiouable]

Good job. But on the roof makes me uncomfortable

[@mwkoskamp1]

Looks like a nice job. Did you put the system under pressure with nytrogen before vacuuming?

[@theairconditioningguy]

Yes sir! Always. Thank you for watching.

[@xxvodanhxx]

Some critical parts not shown 1) How was the hose sealed through the roof from the top 2) How were the lag bolts sealed from moisture seeping through into the roof?

[@theairconditioningguy]

I'm sorry but I do not make "How to videos" . I just record what I do and how I do it for other installers and potential customers. I'm sorry if you misunderstood the purpose of my channel. I'll do my best in future videos to make that more clear.

[@reempire888]

I love seeing all your videos. Nice work! What do you recommend as far as brand goes? I'm thinking Daikin, Mitsubishi, or Fujitsu?

[@theairconditioningguy]

Thank you! I'd go with Daikin or Mitsubishi if it also includes a 10 year parts warranty.

[@manuelherreros4609]

Hey great video, keep up the good work. I have a question are the splits efficient for restaurants?

[@theairconditioningguy]

Thank you, and yes they are very efficient.

[@zecuber1177]

Does this installation similar like a York minisplit?

[@theairconditioningguy]

Yes, they're all about the same thing.

[@zecuber1177]

@@theairconditioningguy ok thanks 👍👍

[@robertlyman9789]

Nice work, was more interested in the install of inside unit, but thx

[@theairconditioningguy]

I promise I'll focus on that next time.

[@lxstangs]

Do all mini splits come charged already ? Just pull vacuum and open it ? Thanks

[@theairconditioningguy]

They come with SOME refrigerant. You'll have to read the installation instructions of your particular manufacturer. If you install more line set than the unit has refrigerant you'll have to weigh in the rest using the chart in the installation instructions. It will read something like" x amount of ounces per ft of line set".

[@elpelon5991]

Buen trabajo lo unico que no mire como conectar la pipa del desague

[@theairconditioningguy]

Tal vez se me olvidó grabarlo. Para la próxima! 😎👍🏽

[@francicruz5970]

Hola qué tal amigo. Tengo una pregunta. Yo instalé un aire igual como tú instalaste en el video. Pero lo logro que funcione como calentón.

[@theairconditioningguy]

Hola, ya chequeaste el 120v? Probablemente está al revés.

[@marzgtp]

What does it cost to install one?

[@rayaansv147]

Nice bro keep it up 👍

[@cdubs1723]

What did you use to cover the line set? A UV blocking wrap?

[@theairconditioningguy]

Exactly, that's what is required here in southern California.

[@cdubs1723]

The Air Conditioning Guy what brand is it?

[@theairconditioningguy]

@@cdubs1723 www.airexmfg.com/

[@SnakeHaven4Reptiles]

I just had one installed, but noticed the back seems open. Is there no cover that goes on the back side of condenser against wall part

[@theairconditioningguy]

Some units come with a cover but most don't. You can order one from some manufacturers but in my opinion don't waste your money. Not really necessary.

[@3dB123]

Compa. I have a 1,000 sq ft house I’ve had hvac recommend the 15k aurora or the 18k lv Daikin, i live in Oregon so I would use more the heater. What do you guys think?

[@theairconditioningguy]

18k

[@3dB123]

The Air Conditioning Guy so you think it will short cycle or use more electricity since it’s a bigger unit?

[@theairconditioningguy]

@@3dB123 12k btu's = 1 ton 1 ton is good for 400 sq ft. If you can get a 24k get that instead. I was just choosing best option from what you presented. I'm not familiar with your climate zone so if I where you I'd hire the company with the best reputation. Mom and pop type. Not big corporation. Note: Heating is a whole lot easier than cooling.

[@3dB123]

The Air Conditioning Guy yes I have gotten a couple estimates but they all are saying different things. On is going for the 15k and the other an 18k both are Daikin. They Olán to use one unit to do the whole house. They plan to install it in the living room and I just have one main hall way that connects the bathrooms and rooms together

[@theairconditioningguy]

@@3dB123 You don't rather install Central heading and AC? Sounds like you need at least a 2.5 ton system. If you can't afford it I'd wait and save up for it. It's a big ticket item! Better to wait and get right size system than install something cheaper that just won't cut it in extreme conditions.

[@APackOfNinjas]

How much would the unit with part retail around?

[@genehansen4244]

how many amps does this unit draw?

[@Gboybotitoy]

Love ur Spanish Accent GUAPO.

[@peter_kelly]

Any advantages to Daikin over Mitsubishi?

[@theairconditioningguy]

I think that if you install either one correctly it should be fine. Dikon comes with a 10 or 12 year warranty on parts. I don't remember what Mitsubishi comes with.

[@yankoo1689]

@@theairconditioningguy what's the copper tubing size is?

[@theairconditioningguy]

Sizes are in the installation instructions.

[@dantx4545]

Buen trabajo

[@theairconditioningguy]

Muchas gracias!

[@ramonsantos5404]

What brand or where can I get one of the adjustable stand or bracket for the condenser?

[@theairconditioningguy]

US Air conditioning distributors carries them. Here's what i found from the manufacturer. universalcurb.com/index.html

[@LifestyleSean]

What is the cost of something like this

[@theairconditioningguy]

I don't like to discuss prices on KZbin. Also it varies drastically from state to state.

[@ChildishGambeaner]

It'll run you about 40 bucks total

[@ramonsantos5404]

How is that stand secured onto the roof?

[@theairconditioningguy]

Lag bolts! 😎👍

[@ramonsantos5404]

Do you use a sealer?

[@ramonsantos5404]

Do you use a sealer?

[@theairconditioningguy]

Yes

[@ramonsantos5404]

Sorry I’m all hesitant to make holes on roof but What kind of sealer did you use?

[@Fox40-MD]

What is the brand of your roof bracket?

[@theairconditioningguy]

I use the RC-102 universalcurb.com/

[@airoasismechanicalhvac7475]

Nice install Juan, but your still using a flaring block get with times old man LOL 😂

[@theairconditioningguy]

😆😂 Any particular one you recommend? The the two I bought didn't work out so good.

[@airoasismechanicalhvac7475]

I own the one made by CPS. I've had it for six years and never had an issue with it.

[@philltafolla]

The Air Conditioning Guy I highly recommend the Spin flaring kit . You put it in your drill , makes perfect flares .

[@theairconditioningguy]

@@airoasismechanicalhvac7475 I'll try that one thank you.

[@ronaldswindell1525]

No leak check?

[@theairconditioningguy]

Yes I did but I don't usually record everything I do. Thank you for watching!

[@andygalindo8978]

Mi gusta mucho. Mass por favor.

[@antalkaroy6820]

[@sudibatam4996]

T

[@joemarz2264]

Que mal video, mal explicado, te mareas con el movimiento, no se ven los detalles importantes. Pésimo.

[@Gcanno]

No Es Instructional