Thanks for watching 🙌🏼 Catch me on Instagram too 👇🏼 / hvac_uk Also always forget to mention you can check out some of the tools I use on my amazon shop 👇🏼 www.amazon.com... Legends 👊🏼👍🏼
Пікірлер: 62
@RuthieG13 жыл бұрын
Bang a magnet on it and confirm that the bad one has power, boom. Good job Will 👏
@hvacuk89753 жыл бұрын
Ruth 🙌🏼 Always handy to carry a solenoid magnet 👌🏼 Some how forgot to mention you should check the board is sending power 😅🤦🏻♂️🤜🏼🤛🏼
@KG-yn9qi3 жыл бұрын
I worked in oil fields ( 22.5 year son rigs, 5+ years in surface facility’s including refinery as repair pipe fitter.) Can tell you very scary (refinery work) and priority. You are required to label and date and sign all your work in records and on actual pipes/ plumbing / valves where ever you worked! So if something failed you get to go to jail!!! I loved to run stainless steel tubing. Bending, fitting runs in over around in and out of controlled stations and test stations. To and from control valves level controls electrical over air and heat over air and gas /air regulators. Relief valves as little as 2psi up to 6,000 psi.
@MrSanghzor3 жыл бұрын
I love to see these vids. I mostly only work on residence Aircon so small units. But in the end they all work the same to be honest.
@dannyroyles33083 жыл бұрын
Always appreciate how you simplify the work. Top man keep up the content 👍🏻
@hvacuk89753 жыл бұрын
Thank you mate 🙌🏼👍🏼
@DavE-bh8lz3 жыл бұрын
Always enjoy watching your videos. Thanks for posting.
@hvacuk89753 жыл бұрын
Thanks mate, appreciate it 🙌🏼👍🏼👍🏼
@Eggnog30007 ай бұрын
Great channel, how come it's just stopped? Just passed f gas and these vids are brilliant. More vids would be great...
@FrostBlueFire3 жыл бұрын
I'm a little surprised they didn't have spade connections at the solenoid. Instead of having to create a wiring mess, but nice video man! I haven't worked on these VRFs, they look cool, and I'd love to learn em someday. But I hate city parking for us trade guys, so maybe not. 😂😂, Great video mate
@bago493 жыл бұрын
Tools don't make the tech, once you know what you're doing often time you can get it done💪🏾💪🏾
@hvacuk89753 жыл бұрын
Exactly mate 👏🏼 Thanks for watching 👍🏼🤜🏼🤛🏼
@christiansommer9143 жыл бұрын
Excellent work.. True super tech..
@hvacuk89753 жыл бұрын
Nice one mate 👊🏼👍🏼
@connorjohnston30223 жыл бұрын
No service checker or fancy computer will beat the engineers hand and intuition 😂
@hvacuk89753 жыл бұрын
The hand is definitely the best tool in my kit 😅
@connorjohnston30223 жыл бұрын
@@hvacuk8975 which one?, left or right 😂
@Clasped0033 жыл бұрын
Yo, play some Technikal or Gammer tracks in your videos. Cheers from the U.S. and love your videos!!!
@phillichillin17163 жыл бұрын
Nice video mate! Learned a little
@hvacuk89753 жыл бұрын
👍🏼
@laworder60923 жыл бұрын
Thanks for sharing excellent video cheers mate
@hvacuk89753 жыл бұрын
No worries mate ! Hope it helps some people 🙌🏼 Thanks for watching 👍🏼🤜🏼🤛🏼
@kcomfortsystemshvac70602 жыл бұрын
Hi,,,mate....good video as usual ,,,,😀 this unit it is heat recovery unit ,,,I can see it has 3 pipes ? I am right ? 🤔
@bazbillybob43193 жыл бұрын
Great video mate 👍
@hvacuk89753 жыл бұрын
Thanks mate 👍🏼👊🏼
@AirsoftColeraine3 жыл бұрын
Great stuff as always 🤘
@hvacuk89753 жыл бұрын
Thanks mate 🙌🏼🙌🏼🤜🏼🤛🏼
@angelagosto83273 жыл бұрын
Nice video will like always been wanting to ask what boots are those?
@hvacuk89753 жыл бұрын
Thanks mate 🙌🏼🙌🏼 The boots are from a place called Screwfix if your in the UK. They are their own brand ‘Site’. 👍🏼👍🏼
@Str33tF1ght13 жыл бұрын
i love your videos i love your work ! How long does these Daikin VRV last ?
@hvacuk89753 жыл бұрын
Thanks mate 🙌🏼 These ones were installed in 2005 so around 16 years old. You could keep them going for as long as spares are available I suppose. Some people may look to upgrade after around 15 years or so 👍🏼
@soulmpowered Жыл бұрын
Exellent job!!!!
@jameshendry99063 жыл бұрын
What software do you use on your laptop for reading? Great video thanks for passing on the knowledge!!!
@hvacuk89753 жыл бұрын
Thanks 🙌🏼 It’s Daikins own software and service checker mate. You have to purchase it direct from Daikin, usually involves doing the training course too 👍🏼👍🏼
@truthmatters6719 Жыл бұрын
@@hvacuk8975 great video sir! Can we do the training course online and if yes where do we find it?
@sterlingarcher463 жыл бұрын
Nice troubleshooting mate , I'm kinda clueless when it comes to VRVs they all seem so overly complicated to me , thank goodness I don't work on them . For the solenoids I like to carry a voltage stick to check if they're energized , then I'll check the ohm value and/or use a solenoid magnet . Unrelated topic : since you know your gear , could you talk about which work trousers and boots you use , I'm tryna find a good confortable pair but its hard if you don't have it in front of you . I bought a pair of Scruffs trousers years ago in London , they're still going strong , hopefully when we can travel again I'll come up and buy me some new ones .Cheers mate , good one 👍.
@hvacuk89753 жыл бұрын
Your spot on mate, I completely forgot to mention you should check you have power from the PCB first and like you say it’s always handy to carry a solenoid magnet in your bag 👌🏼 Yes, I’ve been getting a few questions regarding work wear so I’ll definitely show you what I use in one of the next videos 👍🏼👍🏼 Thanks for watching mate 🤜🏼🤛🏼
@neilvestervictor1803 жыл бұрын
nice troubleshooting
@hvacuk89753 жыл бұрын
Thank you mate 🙌🏼👍🏼
@coldfinger459sub03 жыл бұрын
👍✋🏻 that hand, with your experience on Daikin and knowing the sequence of operation, put that together with the gray matter 🧠 between your ears and you have the best tool on earth As usual great content great video great learning opportunity
@hvacuk89753 жыл бұрын
Thanks mate 🙌🏼🤜🏼🤛🏼
@jessec.92953 жыл бұрын
Awesome videos thanks
@hvacuk89753 жыл бұрын
Thanks mate 🙌🏼👍🏼
@joewall29933 жыл бұрын
Any chance you could speak about how much engineers earn? I know it’s a bit cheeky but it would be interesting. Cheers
@OleRazzleDazzler3 жыл бұрын
could you tell me how to get the setup to hook a lap top to these? perhaps as well could you give me the software or info on how to obtain
@JuanTodoli3 жыл бұрын
No errors on the controllers?
@votrunghieu40992 жыл бұрын
can rattling or creaking sound ?
@richardbartlett69323 жыл бұрын
Top work always a good feeling to 'get them out the shite' but , please drop the musick it' such a turn off and unnecessary. either we don't need to see you taking panels off or fill that time with a bit of rambling on about nothing :-)
@hvacuk89753 жыл бұрын
Thanks mate 🙌🏼 Appreciate the feedback too 👍🏼
@AirsoftColeraine3 жыл бұрын
Awh man the music makes it. Not my kind of music but it makes the video more of an episode than just a video ✌️
@EastDallasKicks2 жыл бұрын
2:33 yeah all those copper lines maybe that part of the field is billions of years out of mg league
@manoelandrefilho66323 жыл бұрын
Dear friend, i am mechanical engineer and I live in Portugal, your Company os hiring for some position in field mechanical engineer? Thanks and put more videos ok
@nureddinrepairman49633 жыл бұрын
how to email you ???
@KG-yn9qi3 жыл бұрын
Hello ☃️Mate! , 👋🏻👨🏻🦳🇺🇸, 👍🏻👀🎥, ❄️🍻🍻❄️👍😎 “hey new nick name?? Snowman!”