Daikin vs. Mitsubishi Electric Multi split systems | Brief Comparison

[@joseaiartonsoaresdearaujoj4110]

Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) kzbin.infoUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

[@heartandbeat]

I would like to install an external unit of my choice between Daikin 3MXM52N and Mitsubishi MXZ-3F54VF2 to power 3 rooms. What interests me most is the power absorbed and therefore the consumption, in particular for heating (example 2.5+2.5+3.5 kW for both models). Daikin for the 2023 model declares P 0.32min 1.35nom 2.09max (kW) SCOP 4.68, annual consumption 1496 kWh with an A++ class. Mitsubishi instead declares P 0.5min 1.479nom 2.08max (kW) SCOP 4.16 and annual consumption 1696 kWh with an A+ class I didn't imagine such a notable difference between the two machines for P min and nom. In no split configuration Mitsubishi manages to reach Daikin's A++ class in heating, this stops me from choosing this product despite it being very good. What do you think of these data, also considering reliability and spare parts in the case of repairs due to mechanical and electronic failures? I am also considering the Fujitsu equivalent which seems to have the best absorbed power values and I am reading that it is an excellent machine with significantly lower maintenance and spare parts costs.

[@kmesaric]

Bok, u stanu imam pripremu za vanjsku jedinicu na balkonu dolje na podu. Jel to u redu ili je bolje dignuti gore? Gore je vizualno ruznije, a dolje me brine da li će smetati ako malo kiše kapne po njoj te hoće li stvarati preveliku vručinu po ljeti navečer ako sjednem pokraj.

[@jaitepaulfigura7673]

ano mas maganda uniy sir daikin or mits?

[@user-kj2tt8ce9m]

Sir kya mitsubishi electric 2 ton msgk25va ka standard installation kitney ₹ hai aur kya standard installation mei 3 meter pipe aur stand milta hai..pls jawab dijiye, dosry company ifb ,lg waghaira mei.stsndarf installation ke sath 3 meter copper pipe stand milta hai, ifb toh standard installation free deta hai .. Pls jawab dijiye.

[@apurbadey94]

Mitsubishi NAHIN DETA HAIN KUCH BHI,MAINE Recently LIYA HAIN 12 March KO

[@luisantoniofernandes1487]

Escelente,meus parabéns, tem valor agregado.

[@Zanelancaster20074]

The daikin 6.8, 8.0 and bigger have a different looking outdoor unit in australia.

[@romeodelluza949]

Saan po nakabili ng parts po ng mitshibishi ng split type

[@surojitkar6376]

Luxuri ac kon sa h india me

[@mitsubishielectricmoscow]

🤙🖤❤️‍🔥

[@ymerdurres7189]

Sa kushton nje kondsjone 9çe

[@surojitkar6376]

Good

[@vedranhrzic-jd3li]

Mitsubishi is better

[@barbieshine9498]

Blurr