Parkside 2 in 1 Cordless Brush Cutter 40v

Got myself a more powerful electric grass/brush cutter made by Parkside. It works as it should and it can cut any type of grass, no matter how big or thick it is.

[@CelentanoCelentano-b8f]

Motocoasa in sine este buna, cat timp functioneaza. Am cumparat-o acum un an din Lidl, am facut taiere cu fir pe cca. 5 ari, in vara. Anul acesta am incercat sa cosesc cu discul 40T cu vidia. Dupa o taiere de 30 de secunde s-a oprit pur si simplu si a luat foc in zona motorului. I-am dat acumulatorii de 4Ah jos si am demontat carcasele motorului...Placa de aluminiu, cea cu electronica din fata motorului, puscase si intrase in scurt. Cam asta-i experienta mea cu un motor brushless. De piese de schimb nici nu poate fi vorba. Bani dati de pomana.

[@DailyCoolGadgets]

Imi pare rau sa aud asta. Eu nu am incercat cu alt fel de disc, am folosit doar lama aia cu care a venit motocoasa. Trag de ea de mai bine de un an, in mare parte cu fir. Merge cum trebuie.

[@marilenapopa384]

Foarte util acest video, astept cu interes si alte unelte parkside. Cat dureaza o incarcare completa a acumulatorilor? Multumesc!

[@PaulIstoan]

Depinde de acumulator. Pentru cei de 4ah dureaza cam 35-40 minute. Dar trebuie sa fie reci. Daca ii scoti direct de pe motocoasa cand sunt descarcati, dupa ce au fost solicitati, acumulatorii sunt calzi si incarcarea nu o sa inceapa imediat. O sa palpaie LED-ul rosu pe incarcator pana se raceste acumulatorul (cam 10-15 minute).

[@50505joker]

Avand in vedere ca se vinde fara acumulatori, puteti sa mi spuneti daca merge si cu un singur acumulator sau, trebuie neaparat doi acumulatori ?

[@DailyCoolGadgets]

@@50505joker Motocoasa are motor de 40v. Prin urmare, aveți nevoie de 2 acumulatori de 20v ca să funcționeze.

[@50505joker]

@@DailyCoolGadgets Multumesc foarte mult !

[@riazmcg]

Thinks for the video. I'm thinking of getting one of these next year. I'll be putting it to hard use though. Few questions if you have time. How long does two 4ah batteries last? Have you cut briars? Have you tried an Oregon mulching blade by any chance?

[@DailyCoolGadgets]

With wire on full spreed it lasts 20-30 minutes with two 4A/h batteries. I have cut very thick grass with the included blade and it works perfectly. I didn't tried any other blade with this grass cutter, only the one included.

[@pacor7757]

Thank you very much for the video. I just bought this same version (B2) in Spain. I hope to try it soon. Which accessory did you find worked better and faster for you, the wire or the blade. It seems that you use 20v 4ah batteries. How long do they last? Are you satisfied with its duration? What position do you usually work in, position 3? Thanks

[@DailyCoolGadgets]

Most of the time I use the wire. I only use the blade for thick or very dense grass. If you plan to use the blade, it's better if you remove the plastic guard (in this video I didn't remove the guard). I use the 20V 4A/h batteries on position 3 (which I use most of the time) and it takes 35-40 minutes until the batteries are discharged. More then enough for me, after 40 minutes I usually want a break and in this time I charge up the batteries and do something else in the garden.

[@pacor7757]

@@DailyCoolGadgets Thank you very much! 💪💪

[@florentingavrila2782]

Salut! Cat te tin acumulatorii de 4ah? Vad ca pare potenta, ca una pe benzina dar din pacate nu o gasesc in magazine

[@DailyCoolGadgets]

Salut! Cu acumulatorii de 20V 4A/h ține cam 35-40 minute. Vara trecută am tuns cu ea destul de des și în continuare merge fără nici un fel de problemă. În magazine nu știu când mai apare, dar vezi că poți găsi pe olx și pe diferite grupuri Parkside pe facebook. Unii au preturi suspect de mici, așa că îți recomand să ceri livrare cu verificare și plata prin curier.

[@florentingavrila2782]

@@DailyCoolGadgets multumesc mult pentru raspuns! De curiozitate, sa am un pret de referinta… Cat a costat a dvs de noua in magazin?

[@DailyCoolGadgets]

Anul trecut a fost la Lidl în luna Mai cu 499 lei.

[@florentingavrila2782]

@@DailyCoolGadgets Va multumesc frumos!

[@DailyCoolGadgets]

Cu plăcere!

[@tonyarnold1002]

Where to get spares

[@robby8958]

Good video. I purchased this product a few months ago, and I'm very happy with it. Literally, just yesterday evening, I used the steel cutting blade for the first time. I had to remove the guard in order to use the cutting blade, as there wasn't enough clearance (with plastic guard in place). It's a minor quibble as I reattached the guard & spool afterwards.

[@DailyCoolGadgets]

Removing the guard is a very good idea but make sure you were protective clothes and shows cause things from the ground may fly and hit you (I'm talking from experience :D )

[@riazmcg]

Those blades are a waste of your time. Buy Oregon blades.

[@cee1699]

If you don't remove the protector the blade will destroy it sooner or later, if you hit some hardy grass pollen with the protector for instance. It only needs to wobble a bit into the blade and it's game over. This thing needs to come with 2 guards