Is the GAN356M a cheaper X? 356M vs XV2

[@nakuou]

5:56 the most satisfying thing before the price

[@n7x]

For anyone with a DaYan GuHong 3 and the 356m, which one is better?

[@thatguywithtacos1588]

Burger_Gamer depends on your turning style

[@n7x]

ThatGuyWithTacos would the gan 356m be better for smoothness, stability and speed?

[@thatguywithtacos1588]

Burger_Gamer I believe the gan 356 m with yellow ges is the best in my opinion but they are quite similar

[@seankim2916]

BurgerGamerCubing keep in mind that the guhong v 3 is 54 mm

[@cbarbaz]

Although your video is 2 years old, it was still very helpful to me. It helped me choose a Gan cube that didn't break the bank, so I went with the 356 M and I'm absolutely loving it! I particularly appreciate how quiet it is 😊

[@Stupid_Egg]

I just bought a 356M, it's so good!

[@milanjovic3296]

Did you get GAN cube bag and if you got, duid you got newer or older bag

[@M3ko2]

After watching this, I'm really happy to see GAN take a step in the right, accessible direction ♥️

[@robertg0105]

7 months later (Releases 65 dollar cube) Everyone: You Weren't Supposed to do That

[@Applemannn]

1 year later trash

[@jerren123]

1:42 adjustable wagnet and adjustamould spring system

[@jerimiahabad3267]

I freaked out at that price point until i realized its in Australian dollar

[@futuregmchess1561]

@Aastik Marahatta On the cubicle you can get it for 21 usd (because they're having a sale on the cube)

[@futuregmchess1561]

@Aastik Marahatta Ok

[@yeadai89]

im in australia

[@chris_ss2]

@@yeadai89 how are your kangaroos doing?

[@potatoman3219]

@@chris_ss2 lol

[@s2erp5ent]

5:56 it was at this moment billy knew he fricked up

[@mregggd8720]

HAHAHAHA so funny

[@void4813]

I literally just got a GTS3M and now this comes out, dang.

[@chifune8245]

Eh, the GTS3M isn't bad by any means. Dropped my average by 4 seconds once I lubed it (24-20 seconds) and it's served me well. I'm still planning on getting the 356 M, though, because I wanna try out a gan cube and I don't have enough for the XS.

[@dam0k625]

Me too lol

[@gray_gogy]

Lol same, mine is on the way. But do you think that the 356 M would necessarily be better than the gts3m?

[@kscdisappointment2404]

I still have the non magnetic gts2 cuz I got it for Christmas and then like a couple weeks later they dropped the magnetic version

[@durfin955]

The gts3m is super locky when used a while

[@DrawCornOfficial]

this video literally let me consider getting the Gan 356M thank you so much!

[@friedice5916]

Do u have it now? Is it good?

[@Zeta778]

1:42 Wagnets? 😂

[@gaolililily4762]

William Yoong lol 😂

[@JoeBricks13]

5:56 that was so hilarious when the instant he tried to turn the 356M, it went into pieces!

[@rk-vt1go]

I love these videos. They’re informative, and really entertaining. These are the best comparison and review vids that I’ve ever seen. It kind of makes me sad I’m not popular or fast enough for a sponsor. If I was though, you’d be the first person I would ask without a doubt. Keep up the outstanding work! Also 5:56 though

[@twistiicuber1055]

Ryan Knight one day, maybe we’ll both be sponsored

[@3dprintingpress]

I love the pro tip of the ges

[@HumbugShow]

I have both of these and I have found the Xv2 to be a faster cube. They are almost the same and for the money the M is better value for sure. At the end of the day the Xv2 is almost too fast for most people and the tension system can be setup identically. I run yellow GES nuts in my M and the light blue set on 1 with the 2nd tightest option on the Xv2. I got my Xv2 for $50 on sale and if I had paid full price I wouldn't have been happy since my pb is only 20 seconds. Save the $$$ and buy some MGC 4x4 - 7x7 cubes instead along with the 356M imo.

[@spffy]

Great overview of both! Very informative, I appreciate how in depth this was!

[@matthanlu9416]

I love watching these videos, even though I don't have most of the cubes you review.

[@nixxgg]

5:53 BOOOOOOOM!! 😂🤣

[@NKrypt]

Was considering getting the 356m and 5:56 concerned me for a moment

[@BrodieD]

I was tossing up between the 356M and the Moyu Yuexiao Edm. I ended up going for the Moyu. Received it today as well as my YJ MGC5 5x5 and QiYi axis cube which was nice surprise for the mystery puzzle. So far very impressed by all the puzzles

[@dailypuzzles]

EDM and MGC5 are great puzzles, excellent picks!

[@BrodieD]

@@dailypuzzles definitely a lot better than my Warrior W and QiZheng S budget cubes. They served me well in learning how to solve. Just need to replace my QiDi S 2x2 and Qiyuan S 4x4 in a few pay days.

[@dailypuzzles]

@@BrodieD If you don't want to break the bank I'd recommend the Yupo 2x2 and Yusu 4x4 :)

[@BrodieD]

@@dailypuzzles thanks for the suggestion I will definitely keep them in mind

[@zo4473]

You should have bought the MGC Elite instead of EDM

[@rithvikchittineni7]

When will you announce the winners of the giveaway's you've done

[@dailypuzzles]

Later tonight in a community post, there will be extra prizes too for the delay

[@zazu.jm1]

Sorry I’m stupid could you pls tell me what a community post is

[@rithvikchittineni7]

Billy you are the best youtuber , cuber , person. You are so kind to all of use , you are giving away more puzzels for us , you reply to all of our comments and you apologize to the mistakes you have done and be safe ,use sanitizers everytime you go out or touch someone

[@MixedTutorials]

@@zazu.jm1 community tab means a post in which a KZbinr can held votes , share images ,short videos etx

[@BrodieD]

@@zazu.jm1 if you go to the DailyPuzzles youtube page (or any KZbin's page) there is a section where the youtuber can make posts and updates as well as polls

[@BalveerSingh-ll7pn]

Sir Gan Air UM or 356M which one is better.

[@brycepowell3313]

Thanks for telling me right after I get the X v2, lol.

[@memes-ji9st]

It’s a cheaper, smaller since it’s 356M I ordered it and I am excited for it

[@dailypuzzles]

Thanks for watching everyone! We just announced all the giveaway winners and also picked an extra 5 winners for the delay, check the results here: Edit: Link doesn’t appear to work on mobile, go to our channel and click on the community tab to see the results

[@arcitekk]

can't win anything

[@jovellavila4075]

Why does it says that it doesn't have any content?

[@arcitekk]

Are you using a phone

[@jovellavila4075]

Yes :

[@l3rodyyy73]

DailyPuzzles why wont it work?

[@kayucraft206]

When I want to add the mystery cube to my cart that has a total of $61, I didn't get the discount. The mystery cube still costs $10. Why is it happening?

[@gameryusic825]

Its funny because I have a Gan 356 M sitting right infront of me. Begging to make me use it as my main.

[@mfaishalaminuddin3675]

When he said that the GAN 356 M is so smooth and well lubricated, i want it sooo bad!! But i can't afford it... I hope i get one day....

[@kienpeng001]

What do you have?

[@mfaishalaminuddin3675]

@@kienpeng001 rubik's brand

[@kienpeng001]

@@mfaishalaminuddin3675 oh wow, what do u avg?

[@mfaishalaminuddin3675]

@@kienpeng001 1.07.544

[@kienpeng001]

@@mfaishalaminuddin3675 I suggest learning cfop and get better at it before buying a premium cube.

[@leafgreen4141]

Gan X m lite will is in my wishlist chase of the price 👍 Tnx for the heart Dp

[@whiskapedia4254]

First time cuber here, i wasted my money for a x v2 just to know that its pretty much the same thanks you

[@thedude6740]

Is the GAN 356 M still a thing in 2021?

[@rubankumar814]

Please do comparison between moyu gts3m and gan356m

[@esbetmehyeddinova6280]

Which is better? Changeable magnets or changeable nuts

[@yrcubershorts9931]

Thanks for helping me to make decision to one of them i am going for gan 356 m

[@thectheb]

Should I buy pls tell me

[@manasvemareddy6743]

Can you do a battle of gan cubes video

[@noureldinmohammed7612]

r u sure the lite version doesnt come with those ges tensioning stuff and the normal one comes with them or did u accedintaly switch them due to whatever reason when u were speaking? Can i know and fast cuz im thinking about buying the lite version

[@chriskunce3331]

Noureldin mohamed Yes the only difference for the lite vs standard is the extra ges nuts. Check out thecubicle video if you want confirmation

[@thatcfopcuber3810]

I decided to buy the X V2 only because it was black friday. Ended up getting it and 2 GAN stands (the ones where you can spin your cube around) for $60 aud do that was definitely worth it. Also the X V2 is a little faster, and I am used to very high quality and magnet strength since my main is the 12 so If I got the 356 M then my performance would be knocked down considerably.

[@xiangyuho4785]

Finally a new video yay

[@cubingkid1922]

By the way I subscribed to you and tingman you guys are amazing

[@ijlal0259]

in 2022 they cost [almost] the same so now it makes more sense to get the gan x v2 (in the gan shop only the v2 exists)

[@Tethered7]

exactly what i needed, thank u😄

[@helenavoloder5303]

When will you restock little magic square-1 m

[@piemaster8801]

Hey guys since I can’t get to the community post can you tell who the winners were? Thx

[@shafinislamicytc4998]

You have the sweetest voice ever.

[@holdenlester]

when you have a discount code for yourself on your own website: STONKS

[@fardeensaifi3001]

Sir is 356 m is quieter than x or xs

[@danpash7517]

Can u use the 356M magnets in the RS

[@Bobby-ph3lr]

Even the Gan RS after magnetization is virtually the same cube as Gan 356M, Gan X V2

[@Bobby-ph3lr]

I put N45 magnets in the RS and now it feel almost exact same to the XS of my friend without the light feeling

[@5QUANCR0W]

Exactly how many GAN cubes are there?????

[@BirdHasBeenShot]

If you change the pieces on the van 356m can you also change the magnets

[@indiramartin2277]

Hi Billy, please can you make a video on the comparison of gan X v2 and gan xs

[@risue08]

Try comparing the GAN XS to X V2 and M to XS.

[@Hektical_YT]

Do you think i should switch to the Gan 356 M over the RS3M 2020 when i want a gan? I average 30 sec.

[@COOLgate.e]

If you think you can add more dollars, then go with gan 11 m pro but, if you dont want to, then yep 356 m is good

[@joeg946]

Hi. Is there going spring bullet from 356m to 356x v2? I know that is different from inside, but do you try is it fit? My 356xv2 is too loose for me on High settting (my finger can put between edge and corner!!!). Will I have more options if I buy this set of 4 different bullets?

[@nixxgg]

For the owners or future owners of GAN356 M, GAN don't allow you to borrow the magnets of your friend's GAN 356 X or X v2 😅

[@kdgmr]

Hey I won the GAN Tiled Speedcube from the 10k Giveaway video!

[@ThatGuy16651]

I got the van 356m and I’m watching t9 see how it is

[@BalveerSingh-ll7pn]

Sir magnets are not interchangeable in 356 M. I saw this in 'cube solve hero' channel.

[@pacman1671]

dude why u so formal.....chill out

[@Serkoid]

@@pacman1671 he's probably indian

[@Internetpilot]

@5:58 is exactly why the two tensioning systems are night and day different with the new one being extremely inferior. I have a $90 Gan 356i and $70 356i Play that have an even worse version of this new 2-setting GES nut, and the nut will turn by itself to the 0 setting while speed solving causing the cube explode just like that. The old screw-based GES nut system was vastly superior, the new system that's in the XS and X v2 is mediocre (but at least there's multiple settings), and the new 2-setting GES system just plain sucks. Honestly, if you're going to only give us 2 tension settings, why make it adjustable at all? An ancient $5 Little Magic has a better tension system than a $90 Gan smartcube.

[@rochansanga1842]

I have the original gan air where they first introduced the ges, even in that cube, some sides would come loose as i keep on solving, it doesn't screw in that well either. I was planning on buying the new 356 m for it's attractive price, but man, I'm not so sure anymore after what you've mentioned, shouldn't the ges be locked in a particular tension setting???

[@Mahfy3w]

How much delivery to Qatar?

[@eko27196]

Hi, i also in qatar

[@arc6381]

I NEED THE GAN 356 M RIGHT NOW!!!

[@baseballnerd6465]

What exactly do the GES nuts do, and are they worth it? (In other words, which version should I buy)

[@parabolaaaaa4919]

i dont like blue

[@thildemalkjrn4414]

why is everything in the shop sold out??

[@illidan6663]

I have ordered to your site and it was frick'n fast! And Im from Philippines

[@amin67890]

Nice! Helpful video!

[@raptor2077]

I’m very confused is GAN 356 Xv2 the GAN 356 XS because you were using both names for that cube.

[@jitsjedi3889]

Did you ever say the 10k giveaway winners?

[@Messi_2.0]

When is the YJ MGC 5x5 Stickerless going to be in stock?

[@zcubing6102]

What is the most good of the two cube?

[@joshmearig1112]

I’m the 3rd place winner for the 10k giveaway thanks for the prize😀

[@cubermc275]

Great vid!

[@thespeedcubingstudio2537]

3:54 Gan XS Pieces? It is XV2

[@1x_rAfik]

Is the magnet stength is the same as 356 i?

[@okokseehere9321]

Is the 356M better than the GTS3M?

[@sohailyousaf3172]

hi billy I have a question. I was doing a solve with my gan 356 m lite and suddenly it became really lose and it didn't feel right,. do you know what happened?

[@m2u526]

I have the sm and what might have happened is the center twists and pushes the other pieces away

[@theguythatsaidbruh4548]

Since the performance is exactly the same you gonna wanna go for the price and costumization

[@kebz23]

Im waiting to start

[@removehandlesplease]

3:52 XS?

[@gemlameraforro9664]

Who won the collab giveaway?

[@marckunzinger1061]

Which gan puzzle comes with the exchangeable magnets AND spring compressor thingy

[@kienpeng001]

Gan xs and 356x v2

[@bvcghh1684]

Why didn't you try to go further on corner cutting, because if that's all they can do on normal cutting that's pretty bad

[@Sashvath_Krishnan]

When well u announce the winners of the give away

[@dailypuzzles]

They have been announced and we also picked 5 additional winners for the delay: kzbin.infoUgw28_BID90W2PVWbEp4AaABCQ

[@bibekanandasonowal7811]

I am unable to contact with daily puzzles

[@medrickgonzales1135]

how to enter da giveaway?

[@UndiedGamer]

Billy:Cheapest Gan cube People:We can't buy it

[@Letsgooboi]

i wish i could have the GAN 356M but i ordered the XS before it came...

[@kienpeng001]

Xs is still better than 356m though not as much as the price difference, just a bit

[@samsunnahar677]

Which one is good gan xs or x v2

[@Akronox.]

What happened to the 10k winners?

[@autumnleaf8907]

Hey dailypuzzles which 5x5 should I get the little magic m 5x5, or the mgc 5x5?

[@dailypuzzles]

MGC 5x5 :)

[@autumnleaf8907]

DailyPuzzles thnx for the fast reply

[@antssea9192]

I would really want to get one😍😍😍 btw, I have a question, how can I make my YuXin Little Magic, I have bought magnets for it, but what lube do you advise I shall use?

[@autumnleaf8907]

Use coach tab cubing’s tutorial if u wanna magnetize it, that’s how I magnetized my yuxin black Kirin

[@leech7412]

does anyone know the magnet strength of the 356 m? it looks like it has the yellow capsules but you can't switch out the magnets so I was wondering if it is any different.

[@krix]

gan 356 m has yellow and clear magnets which should be medium and strong magnets respectively

[@leech7412]

@@krix ok thanks

[@kienpeng001]

@@krix only yellow I thought?

[@krix]

kienpeng001 corners are clear edges are yellow

[@leech7412]

@@krix but do the colors correspond to the colors of the gms on the gan x? so on the edges the magnets are yellow so does that mean its the same magnet strength as the yellow magnets on the gan x?

[@mk44a3]

Well i have 356m already but i want to change the magnet i feel weird with this magnet should i go for 356x 356x.v2 or 356xs? Or just wait until another flagship out?

[@tommysteiner2033]

which one had stronger magnets

[@AhmadZauharnahru]

Gan x v2

[@ranadeeplaskar6042]

What about the 9000 subs giveaway results????

[@isaacnewton7424]

Awesome review Love from india!

[@pacjosephnovabos8765]

Does the dailypuzzle have extra core for the gan xs,x v2,gan354 v2 and the gan 356m?

[@altairkerebaev8815]

Gan 356 M

[@TEMPOZ5127]

I have got the GAN 356M

[@TEMPOZ5127]

And the magnets are little ones, and not the long ones. They are not glued in place ei tther

[@mehinpandya5300]

i heard the corner cutting is worse on the 356 M, is that true?

[@pacjosephnovabos8765]

I have seen other videos about the gan 356m they say the cornercut is bad tho but in dailypuzzle video the cube may seem can conercut over 45°

[@dailypuzzles]

Corner cutting felt the same to me on stock settings

[@mehinpandya5300]

ok thanks!

[@asadcubing]

Is the gan X v2 available in black?

[@dailypuzzles]

Just stickerless

[@studybuddy7220]

bro, do you ship to India?

[@ayushkumar4922]

Study Buddy shipping charges are 14 aud

[@imfelikzemdegslmaoo]

3:53 gan xs? I thought it was gan x tho

[@LEVIHackerMan]

Its gan x's 🤣🤣😁😁🤫🤫

[@imfelikzemdegslmaoo]

Oh

[@All.The.Wonderful.Places]

When are you announcing 10k winners