Рет қаралды 12,393
Install a seal on the fire mortar to prevent air from escaping the cylinder
Easy-to-get thread seals of the right size, wrapped around a tight plunger
Treating gobek fire
Caring for gobek fire so that the effectiveness of gobek is not reduced.
1- Avoid hot/sunburned temperatures
2 - Avoid dust getting into the barrel / mortar
3 - Clean the bottom hole of the barrel/mortar from tinder and lubricant dirt
4 - If you use charcoal, clean it as often as possible, because it is rather hard/dusty
5 - Seal or seal lubricate enough thick lubricant (grease), not excess
6 - If the gobek takes a long/weekly break, the plunger is not inserted too deep
How to use goblets
1- Fill tinder at the tip of the plunger sufficiently/not to overflow
2 -Insert the plunger tip into the hole
barrel with the limit of the rear seal
3- Hold the barrel tightly, pull the top quickly, and pull it out quickly
4- Take out the tinder with a stick, and put it on the tinder bundle