Dalton Clutch Kit Install on 2018 Can Am Renegade Xmr1000r

Welcome to ehTV! Our channel is deticated to sharing our adventures on and off the trail. ATV, SXS, and all things off-road related. We mainly focus on conquering extreme terrain with our Can Am Renegade Xmr1000r's, And Polaris highLifters. We hope you'll subscribe and enjoy our regular uploaded video's provided 2-3 times weekly. We'd like to give a shoutout to our Sponsors for their supporting our adventures.
Thank you BayMarine in Trenton Ontario, Jim Thompsons Chrysler in Kingston Ontario, and Dirtylife.ca out of Stirling Ontario.

[@ehTV1000]

Sorry about the re upload, But accidently loaded the unedited version by mistake. I will reload that vid at a later date. Cheers and sorry for the inconvenience.

[@Mr.majic_cracker]

Love the rear facing camera action.

[@brianscott9786]

Great vid can’t wait to see deeper snow

[@ehTV1000]

Me too, reallt excited for some deep powder runs

[@rippenriden2820]

Can am is looking better and better every video

[@ehTV1000]

Thx buddy, I think so too

[@G-Man-kc2nm]

I’ve watched many videos on renegades.... change the hose clamp on the water pump input line from the radiator...thanks for taking us on your journey...”It’s ALIVE”.....

[@ehTV1000]

Rob Farrow is the only one I've seen have that issue yet, But yeah might just do that. Can't be to safe eh. Cheers and thx

[@537331208]

It’s happened to my buddy with his Renegade too.

[@G-Man-kc2nm]

Can’t remember, possibly Frankie’s page. I have seen it elsewhere. I don’t care for spring clamps. I would install a stainless steel screw type. I like your machine as if it’s my own. I’ll shut up now!

[@ehTV1000]

Hahaha, Is a great tip for folks, thx again for sharing G man

[@chazadams7899]

Awesome video again

[@ehTV1000]

Right on, I appreciate it man

[@ChaosGarage]

Nice score and nice rip there, rooster! :D

[@ehTV1000]

Great product, and wicked folks to deal with. Cheers brother

[@thegreenteam6158]

Better and better!!

[@ehTV1000]

Thx man, Its going to be a force alright

[@barharborbasher249]

Looking buddy 🍻

[@ehTV1000]

Thx man

[@RobFarrowATV]

Do not install without female supervision...LOL! Ready to rip'er up now! I've had good luck with my Dalton...although I'm going to a CVTech Primary now! Nice vid Mazz!

[@ehTV1000]

Thx Rob, was there a reduction on yours to start with?

[@RobFarrowATV]

The 850 is geared pretty low and the Dalton took take off point an extra 500 RPM, that made for some nice torque! I used the Brass rivots in the kit! The kit made a big difference in the bike...I know you'll enjoy yours!

[@AllTerrainGuy]

Great video buddy! You didn’t feel like getting a cvtech clutch eh? I just got one and I think I’ve got it tuned right for shift out! And WOW I love it!!

[@WereAllThatBored]

AllTerrainGuy every can am owner should follow this advice. For 250 more you can have a full clutch over a kit and way more performance

[@ehTV1000]

If they want to send me there product to review, then I would love to do the comparison. But for now I'm very happy with Daltons recommended setup. Great Canadian company and I really enjoyed working with them on this vid. Thx for the input boys and the channel support. I really appreciate your feedback.

[@AllTerrainGuy]

eh TV that’s awesome! Keep up the videos man!

[@Mr.majic_cracker]

@@ehTV1000 glad your supporting the Canadian companies! I use dalton too.

[@joshualaviolette7342]

Love the video but I want more lol

[@ehTV1000]

Hahaha, right on. I'll get on it eh.

[@navygt1695]

1 first and love the video dude

[@ehTV1000]

Thx man, glad to hear it my friend

[@WereAllThatBored]

It won't be long until you upload a video of you installing a CVTECH. Loved my Dalton kit but...

[@ehTV1000]

You think eh, I'm not so convinced yet. Lets see how it stack up first against the competition. I will do some comparisons when we get out with the boys. I'm very curious to see how it will pan out.

[@NOSAtvs]

Looks like my machine was taking a real peppering in the reverse cam.

[@raystory9077]

NOS Atvs that’s what I was thinking. Damn ass hole! Lol

[@NOSAtvs]

Ray Story I think i was explaining to my gopro how i have an issue with staying back far enough at the time. Feels like a race....just can't do it.

[@ehTV1000]

It is tuff to stay to far back, I'm always worried i'll miss something on the Camera.

[@ehTV1000]

LOL

[@uknowwho_1829]

First! Love ya bud

[@ehTV1000]

Cheers

[@jerrythornton8541]

I laughed like hell when you were roostin the other guy

[@NOSAtvs]

Come on now

[@ehTV1000]

Bahaha, that's funny

[@muddyassassain6327]

it's pretty cool how you've took us youtubers along with you, from the good bye to the King, to the pick up of the new bike and continue with the break in and add ons. no disrespect to the king, but the new bike is deff taking on its own personality and should have its own video entrence. I'm sure youll do something crazy, by accident or on purpose and that will make a cool bike shot but you asked about what your screen should say... how bout... opening scene... the screen lights up and scrolls... "welcome to ehtv... the darkside" then maybe a few rips of the exhaust, kinda like darth vader breathing... then some crazy mud slinging scene... or something... anyway... you're doing good man, bike is sweet and coming right along...

[@G-Man-kc2nm]

muddy assassain great post....I agree with you...I’m enjoying the adventure.

[@ehTV1000]

Give it time boys, I'm sure we will come up with something new for the intro. I like the ideas and feedback. Thank guys much appreciate all the support for my channel. Cheers

[@atvpunisher51]

Nice. I heard CVtech are good. Also, looks like its time for those Handwarmer grips.

[@ehTV1000]

Yeah looking forward to comparing the two clutch company's. The hand guards block enough for me, don't think I'll need the warmers. we will see I guess. Thx for the comment my friend

[@lucpilon1]

Dalton might have supplied you with the kit which was nice of them, but I must say any aftermarket primary clutch will ride circles around a clutch kit on can ams, especially in thick mud. The factory clutch is flawed, only one side locks, as opposed to a aftermarket primary that has both locking sheeves. Either way good video man.

[@ehTV1000]

I look forward to seeing if you are correct, Many of the lads are running CVTech and other alternatives to compare it to. Should be fun, plus I enjoy doing things a bit different from the rest, excluding the Can Am that is. LOL Cheers and thx for the input my friend.

[@lucpilon1]

eh TV hopefully we get to ride next summer with xmargh that would be wicked

[@cavedog1279]

I've got a QSC full primary, dunno if I could tolerate a respring :P

[@ehTV1000]

Nice, This is a great budget option. Cheers

[@dantheman4670]

Hey just curious what your shift out is in low? Nice bike btw I like your color more than my blue 2016

[@ehTV1000]

Good question, never even looked to see. But I can sure feel the difference. I'll get back to ya on that. Cheers and thx for the Question.

[@jamesboyd9828]

I know you got the fancy STM primary now, but did you notice any improvement with the dalton clutch kit?

[@ehTV1000]

Yes sir, Dalton clutch kit works mint to get you going fast real quick, But full primary is better for running under load, such as thick mud.

[@XMARGH]

No shortage of hired help eh! With all that gear reduction built into the transmission you probably won't have any problems with just a clutch kit on that Gade XMR. The same goes for the 1000 XMR Outlander boys, the problems start to show up in the 800/850XMR that don't get all that gear reduction, they tend to burn belts on a stock primary.

[@ehTV1000]

Agreed, just a little added snap. Should work well. Thx eh

[@NotJustAnotherCody]

Nice bike brohan freakn nice do either one of you plan on doing anything with the rear diff brother just bought the XMR 1000 and 3 months in on the tire that came stock on the bike 30'silverbacks any input would be appreciated keep up good work

[@ehTV1000]

NOS Boss has already addressed this issue on his, He ordered the Mud and wheels upgraded diff. Looks sweet in the powder coated Yellow. I've have been talking to Jarret from Mud and Wheels and hoping to work something out soon as I would like to promote his product as well. I've heard nothing but great things. We shall see, Need to get through Christmas first and then maybe more money and time for upgrades. Cheers and great question man. Thx and Cheers

[@NotJustAnotherCody]

i hear that brother ok cool ill let him know and check it out couldn't believe it went out so fast

[@NotJustAnotherCody]

cant wait to see that best shooting across some skeg

[@sid1288]

Do you plan on getting some outlaws or are you keeping the stock tires??

[@ehTV1000]

Very good question my friend, I still haven't decided witch route I'm taking on that. But thx for asking.

[@chubn1]

Damn did you have to roost your bud on the trail the whole time? Kinda funny

[@ehTV1000]

Hahaha, I thought he was further back

[@dustins5359]

Was it a noticeable difference with the clutch kit? What did you notice most with it? I'm thinking of doing one in my gade

[@mishaalsalha6494]

Did u add a clutch kit?

[@dustinsepko1586]

@Mishaal Salha yes I did end up doing it . I did notice some difference . Not sure why it's just notifying me now ? I sold bike a couple yrs ago

[@coreyeg87]

Bet she pulls after the clutch kit

[@cubbeezx]

Your "beast" is getting "beastlier" (is that even a word LOL)

[@ehTV1000]

I think I've said the same thing about yours some time ago. LOL. Thx eh

[@waydooo11]

Hahaha.. Just feeding it to Keith on the test run!!!!!!

[@ehTV1000]

I think he's used to following the 450 eh. Hahahaha

[@Ryandean1]

I rate my job difficulties with beer, how many beer job you think this is? I saw there was 4 empty on ur bench. Haha😅🤣👍

[@ehTV1000]

To injoy the install, around three. But if it were a race, could be done in an hr or less

[@MattBledsoe117]

Hey bud, how come you uploaded it, the took it down, and re-uploaded it?

[@uknowwho_1829]

Matt Webb this is a different edit

[@MattBledsoe117]

Ah OK thank you

[@dawng75]

you must love cats

[@ehTV1000]

Oh I do, They are part of the family, and get treated as such. spoiled rotten really. Thanks for noticing

[@JackG79]

Have you been out riding a lot Joe or have you had to work everyday??? I bought a brand new ATV in July The summer before this one that just got done, and I hardly touch it. Had lot of plans. But there she sits. 2016 Polaris Sportsman 850 SP Matte Metallic with Warn 3500HD Winch (Synthetic Cable) - Plow, LED's, Rack Storage, Rack X-Tenders. .................... WHOPPING 240 miles on her. I had it for over a full year before I did the first service on it. LOL I had all kinds of plans to get out and go riding, but then work, kids, house, side jobs, all kinds of shit got in the way. One of these weekends i'll have to throw her in the truck and drag'er up to Kingston area so that we can put a few miles on the pod.

[@ehTV1000]

Anytime brother, I work daily and ride once or twice biweekly on my weekends. And of course KZbin vids after work about every other day or so. Guess I like to stay busy eh. Cheers and thx again Jack

[@gregoryshelton1358]

How does the belt hold up?

[@ehTV1000]

Great with my clutches.

[@dynamiccalisthenics1922]

Should of bought a Honda, have you seen mudpuppys Channel?

[@ehTV1000]

I have indeed, Probably grab my young lad one. But I wanted more power for myself.

[@MrJason7680h]

eh TV that's the best way to describe Honda vs Can am

[@chrismc2729]

Does that thing ever rip!

[@ehTV1000]

I know eh, going to be a blast.

[@Austin_capp]

Ehtv is the dalton clutch worth the money??

[@ehTV1000]

I'd like to think so. I was impressed my the launching effect it gave.

[@Austin_capp]

eh TV I’m debating on it or the one the can am sells

[@kurtlehman5150]

I'd love some 720p. JS

[@ehTV1000]

Its 1080 now, Just wait a couple mins before you watch the vid and it will be available in HD

[@ehtv8025]

Stone Slinger

[@ehTV1000]

Yeah it is

[@JL-ep1rb]

Same here, cannot watch some of your videos, won’t load

[@kurtlehman5150]

JL Should load super easy as its a 360p video.

[@JL-ep1rb]

There you go, working now. Just wouldn’t start before.

[@ehTV1000]

Good to hear, still waiting on an explanation from KZbin

[@Infamouscoma885]

Well again I can’t watch your videos on the KZbin app! It’s only your channel KZbin is clearly doing something!

[@ehTV1000]

That's seriously messed up, Don't know what's up with Apple products these days

[@Aye_jeremiah]

Thats going to be a bad can-am !

[@ehTV1000]

Yeah it is, the boys best beware now eh

[@Aye_jeremiah]

eh TV 😎