Damaged By Fire DEVON 5403-Li-20 Rotary Hammer Drill Restoration

Рет қаралды 75,626

Күн бұрын

DEVON 5403 lightweight electric hammer, purchased for $8.
The outer shell was badly burned by fire. Fortunately, the main control circuit is basically intact and can be restored to function after simple repairs.
The mechanical parts are fully functional and show little to no wear.
The rotor cooling fan blades were burned, and the main shaft was accidentally damaged during replacement, so the rotor was replaced with a new one.
Finally perfectly restored.
Thanks to the official dealer for helping find accessories.

Пікірлер: 65

@walter9724 4 ай бұрын

With the cost of new ones, this amount of repair and spare parts needed I would not have bothered fixing it

@Maranello12374 4 ай бұрын

Думаю для автора канала,главное не результат а процесс всей проделанной работы..

@saberwing7930 4 ай бұрын

To my utter shock and amazement, this repair is not nearly as worthless as it might appear at first glance. I decided to do some research, and found out that the shells of a drill like this are actually cheap, like under $20. Provided that the internal components are fine, it might be worth it. Major caveat, though, I was going by the pricing of a similar drill from Ryobi, and not this exact drill, but I'd reason the prices for parts are similar. The most expensive part is, unsurprisingly, the motor and circuit board. However, this guy had to replace the motor shaft, and Ryobi does not sell that separately from the rest of the motor, so I have no idea how much that could cost. That being said, I don't think this is a particularly good idea. Given this drill was in a house fire, the heat might have compromised some components, meaning it might up and fail in short order. But, if it was just a broken case, with no heat involved, that would be worth fixing, especially a higher end tool. This tool, on the other hand, seems to be a budget brand tool.

@Capitan0Guinea 4 ай бұрын

things may change rapidly. skills like these are needed

@bayadere8308 4 ай бұрын

@@Maranello12374 Exactly. I'm glad that someone understands that it's not always about money. Some people enjoy the process and the satisfaction. They are also learning and improving with every restoration they do.

@bayadere8308 4 ай бұрын

No, I'm sure you wouldn't. However, for some people it's done for pleasure and the challenge. It doesn't have to be about money every time.

@cyb3rphr33k 4 ай бұрын

Apart from making the video for the channel, was the repair worth the cost?

@saberwing7930 4 ай бұрын

Arguably. To my utter shock and amazement, drill shells are only like $20. So, this is a tool that retails for $150, approximately, and was purchased for $8 (Incidentally, who would sell something like this? I would think most people would just trash it, or give it away for free.) So, replacing the case and some other bits would be not all that expensive. That being said, given this drill was in a house fire, I'd hesitate to try fixing it, given the heat could have compromised components in a way that is not visually apparent. Especially since this is a budget brand tool, and would not cost that much to replace. So, this technically saves money, but not enough to be worth it. A higher end tool is far more likely to be worth it.

@wirelessgear 4 ай бұрын

the board with LEDs had to be tinned with acid flux first, then the LEDs had to be soldered Very good video

@skipclinghan9241 3 ай бұрын

Brave man taken that repair on 😮

@meninoandrade9833 4 ай бұрын

Crazy restoration it's seems you raised the dead. The best restoration . It's takes lot of patience to this kind of restoration but you did it well salute thank for your video

@RefurbishmentKJ 4 ай бұрын

Thank you, thank you very much😀

@Maranello12374 4 ай бұрын

По началу когда увидел что перфоратор весь сгорел думал не стоит вообще его ремонтировать..Но потом когда увидел что электроника целая то подумал что стоит..Браво маэстро 👍👍👍👍

@SergeyDemi4ev 4 ай бұрын

😇

@omarshanab98 3 ай бұрын

I have a feeling that you are assembling a new tool from a new parts ... but it is good to spend some time to do something

@LoneStar1955 20 күн бұрын

I was surprised that the controller board was still good

@felipebonacio3141 2 ай бұрын

Less expensive buying a new one. But well done anyway

@andrzejporeda7281 4 ай бұрын

Przepięknie jest to odrestaurowane pozdrawiam serdecznie. 👍👍👍👍👍👍

@AbderahimHaddani 4 ай бұрын

THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤

@MASI_forging 4 ай бұрын

Nice work dude. Such a great restoration 👏👏

@rutikuiwa7133 4 ай бұрын

Very good job 👍👍👍

@Jurek-xe3tr 4 ай бұрын

Czy to się opłaciło naprawiać? Bardzo wątpię. Opłaciło się zarobić na kliknięciach

@ScrotumPole 4 ай бұрын

good entertainment value

@giuseppecolombo4701 4 ай бұрын

Ottimo lavoro

@LRestoration1 2 ай бұрын

nice job

@andrewgrace4410 4 ай бұрын

Enjoyed the restoration 😊

@AdilsonLNascimentolagare-lk5vt Ай бұрын

Fico muito bom chou de bola muito top valeu

@suhermanherman7328 10 күн бұрын

Harus punya mesin pencetak benda plastik

@zayadibatong2203 4 ай бұрын

Good job broo 👍👍👍

@jacktakashi7362 3 ай бұрын

Большой мастер😮

@russellgarrett5564 Ай бұрын

You will break the ultrasonic cleaner with that amount of water in it. It's meant to be full of water/solution

@RonaldoSilva-tn8in 4 ай бұрын

Restaurada furadeira de martelo rotativo (martelete)🔨😉

@xchaix 4 ай бұрын

superb

@hHAI21 4 ай бұрын

very good job amaizing

@RefurbishmentKJ 4 ай бұрын

Thank you🤝🏻

@rima39993 4 ай бұрын

Excellent and accurate👍✌️👏👏👏👏

@LazyToDo-re6gl 4 ай бұрын

good bro

@jaimecorrea24 4 ай бұрын

Wow 😮10/10 🎉🎉

@ВалентинЛукьянцев-т1н 2 ай бұрын

🤘🏻🤘🏻🤘🏻✌🏻✌🏻✌🏻✊🏻

@herobrinehacks8141 4 ай бұрын

I just wondered what they did with this? 😑 No matter how I think, I don't get any results! 🧐🫤 All in all, your work was excellent, because you were able to restore this so well. 😄

@RefurbishmentKJ 4 ай бұрын

It suffered a fire🥹

@K3_GT 4 ай бұрын

이걸 살려내네 대단합니다

@waals2663 4 ай бұрын

Awesome

@greennich777 4 ай бұрын

Good job ?? No. Great Job 👍 👍👍

@작두-o7j 4 ай бұрын

새거 삽니다

@delwarhossaindelwarhossain3686 3 ай бұрын

🇧🇩🇧🇩🇧🇩❤❤❤

@marceloleal8809 4 ай бұрын

Achava melhor comprar uma noca😢

@72_a_ 4 ай бұрын

Hobby :)

@RPV_76 4 ай бұрын

Целесообразность ремонта; 1-Являетесь ли вы владельцем склада новых запчастей такого агрегата? - Да. 2-Много ли у вас свободного времени? - Да. 3-Имеете ли вы прибыль с инет контента такого видео? - Да. Могу только порадоваться за вас, 3 из 3х... вам стоит заниматься такой херней.