Danfoss thermostat TP5001 SETUP & MENU

TP5001M, TP5001B, TP5001RF thermostat menu:
P01 01 - Manual temperature operation
P01 02 - Schedule timer 5/2 day
P01 03 - Schedule timer 24h
P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats.
On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed.
P02 02 - ON/OFF standart operation. Boiler is ON till set temperature is reached.
P03 01 - Normal start control.
P03 02 - Delayed start of heating. TP5001 thermostat includes an optional delay start feature to hold off the heating for a time on mild days when the room temperature at the start of an event is close to the programmed value. Recommended for use with gas condensing boilers in order to use less gas. In other words, it is an economic mode.
P03 03 - Optimised start control. TP5001 thermostat includes an optional optimum start control. This feature allows you to set the time at which you require a room temperature by. The thermostat then calculates how soon before the event time the system must be turned up to ensure that the room is at the temperature by the required time. Heating can be started maximum 120 min before schedule.
P04 - Temperature limitation high
P05 - Temperature limitation low
P06 - Frost protect temperature
P07 - Away mode temperature
P08 01 - Timer display 24h
P08 02 - Timer display 12h
P09 - Service due setup. Installer setting only
P10 00 - RF Pairing mode OFF (TP5001RF only)
P10 01 - RF Pairing mode ON (TP5001RF only)
P11 01 - Auto daylight saving ON
P11 02 - Auto daylight saving OFF
Old code numbers
TP5001M 087N7930
TP5001B 087N7931
TP5001 RF + RX1-S 087N7934
New code numbers
TP5001M V2 087N7935
TP5001 RF + RX1-S V2 087N7936
Error Messages
E1 - Sensor failure
EE - EEPROM failure
Lo - Measured temperature below 0°C
Hi - Measured temperature above 50°C
E3 - RF Pairing failed
E4 - RF Signal lost
E6 - Real Time Clock (RTC) failure