Monitoring a boat's battery banks

[@roygould9454]

That Jacaranda tree over your shoulder @3:11 though. It's easy to forget that you live in a paradise.

[@ImnotChuck.]

As you might remember, I am not a boat guy, but I am an RV guy and an electronics guy. So, I understood and loved this vid. In many ways, your boat is an RV that floats. It seems that there is a current, though small, group of folks who are converting trawlers to living spaces...not as glamorous as sailboats, but easier to handle.

[@DangarMarine]

You're dead right about liveaboard boards being very similar to RVs, you have all the same basic needs. On a similar note, Scott I visited in US who gave me tips on my Detroit diesels runs the channel Bus Grease Monkey which is pretty much all about old buses converted to RVs, a very similar concept to trawlers being converted to cruising boats.

[@spunkmire2664]

I think it's unrealistic to think that every youtube channel can provide every bit of information that you might need as a prerequisite. But you do a great job of covering your bases sir.

[@RobRebholz]

Stu, I'm just a guy in a corn field in Indiana and have been glued to your channel for maybe close to a year. Even though all the "electrics" are Greek to me and I skip through some of it, I really enjoy watching and learning. Great work Man!

[@DangarMarine]

Thanks mate. While I was in the US just recently I got to ride on a combine harvester when my friend has harvesting his corn in Carlisle Indiana.

[@cs512tr]

those are C-17 GlobeMasters, they are based in Amberley and will fly to Richmond for training and logistic operations

[@DangarMarine]

Very cool planes!

[@AW-Services]

Another great video Stu. A top tip for anyone who's never wired batteries, starters, alternators or shunts. Never over tighten the binding post terminals as they crack the potting body/ connector substrate

[@DangarMarine]

Yes, it's never a good day when you hear that plastic crack...

[@chrisglassey8585]

The electric system of a boat is just as important as the propeller. I enjoy seeing it because it is part of the build and part of what makes the boat unique.

[@DangarMarine]

Thanks mate, it certainly is very important. As you say, it is also your chance to setup your boat in the way you like to reflect the way you intend to use it.

[@vindivergilio3482]

Thank you for another technical install type video. These are helping greatly with the rebuild I am doing. Although mine is only a 17 footer, we totally stripped out the hull to it's 'bones' and that is our starting point. She's officially on hold for the winter, expecting our first snowstorm to hit later tonight, so.. the next 4 months (hopefully only 4) are going to be planning and doing things that can be done in the garage (rebuilding engine, ect). Thank you and we'll see you in the next one.

[@DangarMarine]

You're welcome Vin. Good luck with your rebuild!

[@shanet.1665]

Hey Stu - I like the electrics episodes. Having a boat myself, I have found that electrics are the most common issue to deal with. From motor tilt sensors, fuel gauge sensors, audio, sonar - and that was in the first six month of awning the boat. I still want to switch the lighting over to all LED, install inboard lighting, put in a proper Battery on-off-on switch among other things. Your videos are useful in trying to convince the co-owner to invest in proper marine grade parts and not try to cheap things out. I'm also a bit of a electronics geek between my education and career background and my hobbies... So yeah - I'll watch all the electrics episodes and sometimes even refer back to some of the older ones. Thanks for the content - and Cheers!

[@DangarMarine]

Thanks Shane, glad you enjoyed the vid. Yes, there are so many things that need attention on a boat that are electrical in nature. Your first six months are a classic example.

[@dogpatch75]

As it happens, SV Delos has just uploaded a couple of outstanding videos illustrating in very simple terms how they have set up their quite sophisticated 12/24 volt electrical system. For anyone contemplating marine electrics, it is WELL worth watching.

[@TR4zest]

Things seem to really be coming together Stu. I like the more frequent updates. I'm really looking forward to uniting the boat with the monster Detroit engine. Good on you, mate.

[@DangarMarine]

Thanks Brian, I did miss this week's midweek video though! :|

[@Dan_C604]

I just loved this episode. This is why many of us follow. Pure boat work with no non-sense unrelated stuff. This is just great! Thanks Stu, always learning with your videos.

[@silasmarner7586]

Years ago, perhaps 20 years ago, a friend of mine installed a voltage monitor (by no means the definitive method to monitor a battery's) health, that he' monitor via packet radio using Amateur radio 2 meter FM. Pretty clever!

[@DangarMarine]

Sounds like an interesting project!

[@larryg3326]

Hey, thanks Stu! My memory of Ohm's law has gotten a bit foggy since I took basic electronics in high school about 50 years ago. After watching this video and the old one you linked, it all (or at least a bunch of it) came back. Great job. Hope you remembered to turn the fridge back on.

[@DangarMarine]

Only 50 years? Your memory shouldn’t have faded yet! :)

[@timw6596]

You need to do a as installed schematic diagram when you get done, this is great info for boats and caravans/RV's !

[@DangarMarine]

Yes, I should start building it now so it isn't a huge job at the end.

[@pitsmcgoo]

Also number tags on the wires and a written description of each circuit.

[@ronbertka]

Stu, don't know if you will see this but here goes. For the wiring harness I would suggest getting the plastic spiraling typically used for notebooks. They are cheap. You cut them into 20-30 mm sections, spin around the grouping of wires. Easy to spin one wire in or out as you go along. You could also plan ahead and group by category i.e. nav, lights, sound, etc, and color code so if you have to trace down issues later it's easier. Spiral could then be clipped up out of the way, etc Anyway, just a thought

[@DangarMarine]

Hey Ron, does sound like a neat way to organise things.

[@davidmorrisjones8999]

I had the same idea on my boat - but the plastic these spirals are made from deteriorates rapidly in the sun and won't last a year if daylight gets at them

[@zechthompson7688]

Next video should be able installing the fuel monitor system. I love watching people install electronics/electricity all across the field! Love that stuff!

[@DangarMarine]

I would really love to have a fuel flow meter, but unfortunately I hear they are surprisingly expensive.

[@donniediamond1411]

Stu last week: I'll stop showing electrics Stu this week: My electrics are more complicated than the Chernobyl reactor... Bye the way, next to watching you tear down an engine, watching you explain electrics I find most interesting! Well, to be fair, I find you most interesting, and I enjoy every minute of your posts, no matter what the subject...

[@DangarMarine]

I thought that was two weeks ago. ;)

[@LeytonC]

@@DangarMarine I thought how simple and logical your electronics are! lol

[@shadetreewelding]

LOL!!!

[@cs512tr]

wait until you get the technical-cat explanations

[@rosshorley4450]

I love it when you overcome and adapt to any situation make things work watching you all the way from the UK keep up the good work what you're doing is a dream for me

[@DangarMarine]

Thanks Ross!

[@rickvangunten4800]

From my perspective the gauge was a perfect fit. Sometimes using the tools you have on hand works in your favor. Looks like this was one of those times. Nice Install...…….

[@DangarMarine]

Thanks Rick, yes, I'm certainly glad I didn't waste and hour and half heading to the hardware store given it worked out just fine.

[@jeffreybeauxfontaine202]

Hey Stu. looks a pair of Globemasters fly by, C-17s

[@TimsWorkshopTJY]

Or C5's

[@garrym09]

@@TimsWorkshopTJY Given the length of the fuselage they look more like C-17 planes.

[@markshropshire5995]

The model of a big one would be B1

[@UTubeRangerBob]

@@TimsWorkshopTJY Definitely C-17s. Although their silhouettes are similar, the C-5 doesn't have the upturned winglets on the tips of the wings that these have (just barely discernable starting at 8:13), it's about twice the size and always appears to be hanging in the air, and the C-5 has a very distinctive electric whining and growling sound from the engines. kzbin.info/www/bejne/npyag52vfK9gr7s

[@ianlawson9628]

There c17’s Australia has 8 of them

[@desolatemetro]

I like those Deutsche connectors. I bought in to the Delco connector system for a project I'm doing, but the Deutsche ones seem easier to work with.

[@rododonnell9783]

The planes appear to be the Aust Air Forces's C17A Globemaster III www.airforce.gov.au/technology/aircraft/air-mobility/c-17a-globemaster-iii They have 8 in total, so you saw 25% of the Au capacity.

[@nevets7152]

I think your meter would use PID electronics, see u tube , this is Proportional - Integral - Derivative for applications requiring modulated controls. Thanks for the video you have a good and natural way of explaining what you do , all the best .Steve in Thailand.

[@DangarMarine]

Thanks Steve. Appreciate the extra info.

[@Jeff_MT09]

Good install video. I agree, you definitely need to monitor battery state and health. The Balmar seems like a great piece of kit. Looking forward to the next video. Cheers. Jeff 👍😀🍺🐠🛥

[@scott.wallace8625]

I have a midnight solar kidd, on attempt 5 to get up and running it need precise programming I got it used with no paperwork. Also I'm new to the whole solar thing.

[@DangarMarine]

Thanks Jeff. It is certainly going to be great to know how the batteries are fairing as the years go by.

[@scott.wallace8625]

@@DangarMarine your welcome Bob. Lol

[@gilbertfranklin1537]

Poor Stu, genuinely impressing us with his electrical knowledge by speaking as though these complicated wiring jobs are so easy for him - when we all can clearly see that the clock right behind his head is not working! 😏

[@davidwoods4366]

Thanks Stu,very nostalgic for me as before I learnt my Radio/Radar electronics in the Royal Navy I had to learn my marine electrics. As a raw 15 year old I had an old Chief PO who insisted that we must be able to recite OHMS law. Here goes........ Ohms law states that the current flowing through a conductor is directly proportional to the potential difference between its ends providing the temprature remains constant. Therefore V over I equals R V over R equals I and I times R equals V... I can still quote it and understand it at 64 LMAO

[@DangarMarine]

Nice work David, and it is really interesting to hear the background of long-time commenters. Thanks for sharing. :)

[@davidwoods4366]

@@DangarMarine Didn't even touch on my diving yet LOL

[@anttiroppola4414]

After I watch all these artesans and craftsmen, your approach is like coming home. :)

[@kranson8514]

Dead simple install to an invaluable little monitor, wise they were all so simple.😂 nice one Stu and loving the humour.👍

[@jeffkazee5568]

Stu: Wouldn't hurt to have some insulated wrenches when working on those battery banks. Nothing like a Big Arch to ruin your day and batteries.

[@davidthompson6099]

Correct sized socket driver. Keeps you from over tourqeing the nuts too.

[@robgw]

Don’t forget the Timber Boat Festival up at Newport this weekend!

[@ianf100]

It may have been mentioned already but "inductive coil" not a problem in a DC circuit.

[@AirCrash1]

apart from.................when you switch on and off.....duh.......the US Navy nearly lost an aircraft carrier because of this.

[@philthomas6038]

Hi stu , found your channel by accident , Brilliant binge watched the 41 vlogs loved them , love your approach the warts an all presentation ....keep it up

[@DangarMarine]

Thanks Phil, glad you enjoyed the series! :)

[@edmundholmes7559]

I recently discovered a much better tool (than a holesaw) for making holes in plywood and similar materials - a tank cutter or adjustable hole cutter makes a really clean cut, and with some test cuts on scrap material it can be adjusted to the exact size hole you need..

[@DangarMarine]

Interesting, I'll have to experiment with one.

[@dogpatch75]

I find the electrics interesting. Ohm's Law is a very simple concept that helps take away the mystery that surrounds electricity. On another note, to accurately measure a hole saw, you must include the set of the teeth in your measurement... don't just measure its body. :)

[@coreyballard8359]

Those are C-17s. Pretty big aircraft. There’s some cool vids of those flying near downtown Sydney.

[@discombubulate2256]

bill murray = instant like

[@DangarMarine]

Good man. :)

[@franklindmurphy]

Hey Stu, so exciting seeing your trawler come together. I loved rigging my boat up with the electronics and stuff and I had a suggestion. With all the battery wires all around, if you get the reusable Velcro cable ties you can get all those cables organized easily. Then put on the conduit over them. Probably overkill but it would look so epic in that space and it would be safer. Probably make for a good video. Anyway cheers from CA. Keep making great 👍 videos. Great channel.

[@DangarMarine]

Thanks Franklin. I actually have a packet of those velcro ties on the boat right now. My plan is to make some sort of rack above the batteries so I can get the cables up off the tops of the batteries.

[@franklindmurphy]

Dangar Marine ok great can’t wait to see the end result! Yew! 🤙

[@davekimbler2308]

Kinda handy gizmo I must say ! Some people are frightened about doing things outside there wheel house so to speak and that’s why they are intimidated by electricity or Diesel engines or welding and so forth ! I myself don’t like doing carpentry ( that god it’s cheap if you screw up ) for fear of making mistakes .

[@DangarMarine]

Thanks Dave, I think it is going to be very handy once out cruising.

[@para1324]

Well done and explained mate! A lead in for the starting batteries is a good idea. Very nice setup. Your boat progress is looking good. A lot of progress is accomplished after she went afloat. Soon you will be out exploring for salvage. I’m looking forward to the engine instal. Any plan for search lights, running lights forward accommodation etc. keep up the good work.

[@DangarMarine]

Yep, definitely have plans for plenty of lighting. The accomodation will be the next big cleanup and paint job on the boat.

[@flick22601]

Doesn't take long before that simple neat wiring layout starts getting a little messy. Glad you planned for it otherwise you'd have a real disaster. I personally hate those in-line fuse holders because it's too easy to forget what circuit their protecting and, whether in fact there is a fuse in a circuit. I prefer to have fuse/circuit breaker panels where I know where everything is and what it protects.

[@DangarMarine]

Yes, given there is space on the board next to the battery chargers it would be interesting to cut out all the inline fuse holders and move them all to shared fuse panel. Before cutting the Balmar one though I'd like to check with them whether that cable has a known resistance for any reason.

[@flick22601]

@@DangarMarine - Good point. I didn't think of that and I was the one who spent half a day cutting and splicing a parallel printer cable so I could relocate the printer and when it didn't work, I spent the rest of the day figuring out what was wrong and cutting it back to the original length. That was around 1979. Tough lesson and here I am suggesting you do the same thing. Shame, shame on me.

[@PappiH]

Nice unit. Oh, about the 0,8 amps going in. When your batteries are full your solar controller will stop charging or charge at low maintenance flow only. To protect the batteries. That explains the 0,8 amps.

[@DangarMarine]

Good point. There is also the fact that the solar goes into all three battery banks and gets shared.

[@tezzag6827]

Yep good use of the Aussie long nose adjustable spanner

[@richardingle7540]

Hey stu , i was thinking about your busted clock , well cant miss it, its behind you on your videos, so i looked and found one of these on ebay, Quartz Clock Movement Mechanism Module 1 Year+ Battery, it replaces the whole of the clock mechanism , you just swap the hands over , it would be a shame not to keep it , it really suits the boat 👍

[@johnnynorrgard1237]

Hi Stu, I usualy run my drill in reverse in the beginning of the hole when using a holesaw in materials that might chip, just to awoid chipping the material. A little tip I realy enjoy your channel. My boat is on the hard at the moment do to the fact that the sea is frozen solid for a couple of months=(

[@DangarMarine]

Thanks mate. :)

[@UrbanFisherman]

Awesome video, waiting on you to catch the 1st fish on the new boat.👍🏾

[@DangarMarine]

Caught at eel this video but let it go, not something worth filming or eating!

[@SpringDivers]

Steve Zissou and another interesting video. Thanks, Stu.

[@kman-mi7su]

Love the picture of Jaques Cousteau Stu!!

[@markshropshire5995]

I only would recognize him as an old man I did not recognize that picture but I did the hat

[@RoadhogRNA]

Nice job!!! That will let you know what’s going on with the batteries!!!!

[@DangarMarine]

Yes, it really felt like I was flying blind with them before.

[@tgfcujhb7583]

Hey stu did you turn the fridge back on ? You can drink a warm beer , but if the bait goes off you won't want to open the door....😂😂😂🍻🍻👍

[@DangarMarine]

Yes, defrosted bait wood be a bit nasty. Beer can always be chilled again. ;)

[@LeytonC]

A nice bit of kit! Pretty simple installation as well, all things considered. Its good it can give the voltage of the starter batteries as well to be honest those are always the batteries i am *really* concerned with. Would be nice to have a digital amp meter measuring the output of the alternator as well, the output of that is also a good indicator of something going south (or maybe north for you :D), plus very high output all the time is not good for it. This tends to be more of a problem for LiPo batteries that have a very low internal resistance when they are discharged. I still like to keep an eye on the situation...

[@DangarMarine]

Yes, I'll definitely be wiring up the voltage lead to the starting battery very soon. It will be interesting to see that measure of the current going into the house bank once the engine is installed and running again.

[@milesslocombe1121]

Parallel means next to each other, series means one following the other. So parallel gives you a bigger route, series clogs up the route. Like a two lane motorway compared to a single lane.

[@darrennelson8329]

Stu, making sure that you have turned back your isolater mate! Need to be thinking about the beer!! 🍻 😅

[@DangarMarine]

Thanks Darren!

[@MrTallpoppy58]

Hey, nothing wrong with your electrical vids. Yep, please make them technically detailed. For me as an retired engineer, I like both feeling like part of the project and understand the technical details. I don't know if some are complaining but I think you have the right mix of including some humor and the occasional side track with Eddie, all good. I am so looking forward to you finishing the engine bay clean up. Are Coopers a sponsor ?

[@DangarMarine]

Thanks mate. I'd rather show everyone the details so they can understand what is happening or even use the video if they are doing a similar install of their own. Unfortunately Coopers aren't a sponsor. :(

[@MrTallpoppy58]

@@DangarMarine Come on Coopers, a carton of fuel a week, well worth the expense !!

[@TimsWorkshopTJY]

Hi Stu, Interesting calling it a Shunt. Unless I'm wrong here that is a medical term for an expander for heart arteries to prevent heart attacks. What you were showing on the video looks like what we call a Solenoid or Relay here. I have two on my RV going to my slide. It's wired from the 24volt duel battery's, wires coming in from the hydraulic pump and two out to the house slide in/out switch. Nice the instrument panel is looking good

[@boooshes]

It's a shunt in electrical terms, that is, a direct connection for current flow. Here it is just a known resistance metal bar used to determine the current flow by measuring voltage drop across that known resistance.

[@TimsWorkshopTJY]

Ok, it was confusing when I saw it on the video.

[@DangarMarine]

Hey Tim, yes, looks a bit like a relay but a very different beast.

[@TimsWorkshopTJY]

Never seen one like it before

[@scotteverett1786]

Hi Stu, love your videos mate. Was keen to watch the video to explain voltage drop etc but can't find

[@DangarMarine]

Ah, thanks for reminding me! kzbin.info/www/bejne/a6WqdJimfduYfs0

[@scotteverett1786]

@@DangarMarine thanks mate

[@peterjensen6844]

Nice to know I'm not the only one with holesaw problems.

[@larryhicks7558]

An all important point to be said here in this area . Lead acid battery are not able to be drawn or drained down . You have to think of them as being able to 50 % of the capacity. So when you get to a 50% level you take that as you are drained down and need to recharge. The more you use the bottom end of a lead acid battery the more problems and shorter life you will have. The lead plates can warp and touch other plates causing internal battery shorts. So just use the top 50 % of a lead acid battery.

[@davidschmalz6075]

Haha, love these vids, 'remind me to switch it back on, or the beer'll get warm'. Priorities, mate....

[@DangarMarine]

Thanks David. :)

[@22ony]

that camera round the three min mark thought I was tripping but I wasn't sad

[@webbtrekker534]

Pretty straight forward install. Thanks.

[@andykent5569]

G'day Stu, always look forward to and enjoy your videos, ALL of them !!! - no matter the content...... cheers 👍👍

[@DangarMarine]

Thanks Andy.

[@barrybitossi9509]

Hi Stu Shame about your clock not working but you should know that the battery mechanism is completely replaceable and for only a few dollars. More to the point it's a job that could be done by yourself using your 10mm spanner.

[@waylonhartwell]

I didn't see you hook up your battery charger cable negative to the shunt I'm pretty sure you would need to hook up that as well to the shunt so if it's charging it won't throw the numbers off on your monitor

[@DangarMarine]

Yes, I need to put a negative bus bar on the other side of the shunt so that chargers and bilge pumps can still be accounted for. There will be a few other changes like that in part 2.

[@-AV8R-]

Hi Stu, I'm sure that you can just buy the just clock motor very cheap for your brass clock. Should be fairly standard.

[@davidmorrisjones8999]

Yep - every week I view the latest vid from end to end to see if that darn clock has been fixed yet... :(

[@Bob8091]

Glad to see help from native Americans providing the Tee Pees for the connectors. ( I always look enviously at the scenery and noticed the purple tree in bloom in the background. Is that a Lilac tree?)

[@DangarMarine]

I think they are Jacaranda trees.

[@Bob8091]

Ah right. Good call.

[@andersonsroad5161]

RAAF aircraft are C17 Globemasters operated by 36 Squadron based at Amberley, Queensland. en.m.wikipedia.org/wiki/Boeing_C-17_Globemaster_III_in_Australian_service

[@bwyyy7306]

Perhaps you should mounted the gauge above the fridge door

[@num1cheechwizard]

They are very proud of this unit I see.

[@johnkinnane547]

G’day Stu well explain and a very good idea John PS must try the Coopers Pale Ale

[@JREACHER1954]

DANGAR MARINE - where time stands still.

[@adrienjoinette8913]

Awesome information, where there's a will there's a way : )

[@ItsKibet]

Those planes were C-17 Golbemasters.Two things I love, planes and boats

[@nuggetwv5302]

I think you're going to need a second shunt, the draw on that starter is probably going to be around 500 to 700 amps. I might be wrong, but I would do a startup test on land before putting the motor in the boat. You could check that stuff like that then, just to be on the safe side.

[@DangarMarine]

The starter current doesn't flow through the shunt, it is only measuring the current draw on the house batteries.

[@nuggetwv5302]

@@DangarMarine That's good to know, I misunderstood that then. I like the battery metering system!

[@Lancelot_Jago]

Planes, Trains and Marinemobiles. Then the 8mm spanner! Thanks for your time and effort to make me laugh. P.S. I was screaming “use the 51” O.k. Not sure I should have admitted that.

[@DangarMarine]

I'm glad I didn't go the larger one too!

[@kevinturner8343]

Those two switches on the dash being slightly out of parallel are doing my head in 😂

[@jakleo337]

The pic on the wall. Is that Joseph Hazelwood? AKA ' Saint Joe '.

[@tuvia4082]

As always, good info, thanks.

[@blimpcommander1337]

C-17's I think on the airplanes. At least that is the designation in the US.

[@webbtrekker534]

I was thinking C-17 as well.

[@RexyH267]

Same in OZ

[@scott.wallace8625]

C-17 was my first thought too but if they are the big ones C-5s. I almost got my dump truck squashed by a C-17 in Iraq. When you cross the taxi way you don't just look both ways you LOOK both ways. Lol

[@keithm8715]

@Tyrone-john Rautahi I thought C-5, but they didn't have the distinctive fan whine C-5s have...and they looked a bit squatty like c-17s.

[@webbtrekker534]

@Tyrone-john Rautahi I was going by impressions. I was Navy not Air Force and Submarines besides so more or less guessing. :-)

[@fireantsarestrange]

Ok i may as well mention the Famous captain's portrait you got up under the ship clock. Bill Murray as Captain Steve Zissou in "The Life Aquatic with Steve Zissou". LOL Dude your funny. You should install a Helipad on top of the cabin and put a tiny model Bell 47 Helicopter up there.

[@DangarMarine]

I have thought about the model helicopter. :)

[@Buses2Bikes]

The pilots of those planes are Dangar Marine fans and did a fly over in your honor, STU! That's what I'd tell everyone anyways.

[@DangarMarine]

Need you on the production team!

[@James_Innes]

Don't forget to turn the power back on! Cheers 🍻

[@DangarMarine]

Done. Thanks!

[@richardmccarthy7023]

Good vid but it would be useful if you could run through setting up of all the parameters on the SG200 as Balmars manual has no information on this.

[@DangarMarine]

I'll see what I can do.

[@bwagenberg]

Can you connect multiple monitors across a single shunt? Great topic.

[@DangarMarine]

Yep, you sure can. You can also add a transmitter and monitor the information on your phone.

[@wallyshaw]

I saw those planes from Minchinbury the other day

[@DangarMarine]

They're getting around!

[@hedgerowpete]

when you measure across the hole saw you measure the teetth not the sides

[@DangarMarine]

Good point!

[@chrisb2239]

Great video complete with a proper fly over. Good to see the 8mm spanner still has some life left in her. 😉 Hey Stu, will the display flash and alert you when you are getting very low on charge? Would be really nice to get it to pair with a simple bluetooth so you could pair it with your phone and get alerts setup there so your phone could sound off the alerts. Will have to give some thought on how you could get the alerts when your away from the boat.

[@DangarMarine]

Not sure about the alarm yet, I'll have to read though the user manual. You can definitely get a transmitter though so you can pair it to your phone.

[@thatoneguy6725]

Cool boat, dude.

[@DangarMarine]

Thanks mate.

[@williamdrake8551]

Steve Zissou, good choice !

[@tysonmillar]

haha the turmoil and indecision on the call for another trip to the hardware store...

[@DangarMarine]

The struggle is real... ;)

[@Chris-wh2gy]

I need those 10 mil spanner wrenches 😂😂 and NEVER let the beer get warm!!!

[@gregoryvrooman9546]

Thanks' for asking those who know everything to be patient for those of us who don't.

[@JuzzyQld]

Fun fact, the coil of wire won't create any inductive issues as you are working with DC. Passing a magnet in and out of the coil would produce an AC current.

[@DangarMarine]

Thanks for the clarification. Very good to know when it comes to neatenting up the wires down the track!

[@jimhunt5259]

wrap some sandpaper around your hole saw

[@markhgillett]

Two things Stu. First congratulations on you increase in subs I assume from your grand tour of the US. Second a word of caution as to where you locate a charging station for cell phones and cameras. Some time we had a wood dive boat burn costing many lives. The cause was undetermined due to the extensive damage but it was suspected the cause was a concentration on lithium batteries being recharged. Good on ya mate 😉

[@DangarMarine]

Thanks Mark. Sad to hear about the dive boat accident. Was that the recent one off California?

[@markhgillett]

Yes it was the Cali boat

[@WVFG]

A little suggestion, give the back of your instrument panel 2 or 3 coats of what ever you have been using to keep the moisture out, especially the edges, would you recommend a battery monitor for normal run of the mill boats?

[@DangarMarine]

Yes, I definitely should have coated both sides of the timber. I'm not sure I would go a full battery monitor for a smaller fishing boat. In that case I think a simple voltmeter is probably enough to confirm the battery is charging properly and hasn't gone too flat.

[@RicMyfraps]

Milwaukee have a cordless heat gun Stuey 👍

[@JOHNJONES-qo3fh]

Fantastic vid as normal stu,BUT !! the bloody clocks STILLnot working !! Take care m8

[@TheNeverendingProjectsList]

The planes look/sounded like C5 Galaxy's but I'm just guessing.

[@stevereich3760]

Maybe a C-17 globemaster 3

[@TheNeverendingProjectsList]

@@stevereich3760 I think you might be right... they do look like they have winglets.

[@pjimmbojimmbo1990]

Look more C141s

[@wcresponder]

I am one of the 20,000. Still here though. Teach on.

[@DangarMarine]

Thanks mate, will do!