Lancer Fix 31 | AC/Heater Control Shaft Pin, Gears, Knobs

[@okogenetics7314]

what if that gear is stuck underneath the steering wheel?

[@DarkDragonWing]

You might want to look into how to replace the A/C Heater Temperature Blend Door. ebay.to/2LjJfhM

[@patrickhandrahan3823]

My daughter has been trying to fix the twisted cable in our Lancer and said this video was the most helpful for her.

[@DanielGuzman-pc1wo]

This dude right here's the best Lancer Fixer on the tube,, Iv'e had my Oz rally for 4 yrs now and have always come back to your channel for support,, here every owner Iv'e come across has had this same issue with the control stems breaking eventually,, seems to be air bubble pockets when casting the molds,, typical problem with these applications. Ether way thanks Mackey for the extremely helpful and insightful videos you bring to the lancer community :]

[@DarkDragonWing]

AC Climate Shaft Stem Pin eBay goo.gl/vjmIpM Lancer A/C Heater Control Gears 7801A110 eBay goo.gl/ayZzW9 Amazon amzn.to/2n8Tw6f MR500925 Big Knob MR500926 Small Knob eBay goo.gl/ysLGNf

[@ACKara77]

I need this material, but ebay and Amazon can not ship to Turkey. Can you help me

[@ACKara77]

I need this material; 1 Unit Genuine Mitsubishi 2004 Outlander Air Conditioner Heater Control Link Gear (7801A110) 1 Unit MITSUBISHI OEM 02-07 Lancer Cluster Switches-Knob (MR500925) 1 Unit Mitsubishi 00-05 LANCER - AC Heater Climate Control Panel Knob Shaft Stem Pin

[@tysonwilliams2085]

DarkDragonWing ii

[@radakutlesic2104]

I have 2 questions:is this same sistem for pinnin pajero and how to fix door handle from insside it wount open...Thnks

[@arthurleino]

My wife's Heater Fan control knob shaft broke. Thanks for the video!

[@liammcdonald8985]

Used this vid for my evo 8 MR. Thanks dog you're a life saver!

[@AndresRomanJ]

thank you ! I'm a lancer fan and this channel is great!

[@358317]

Were can i get that gear that goes on the middle of the two new gears you put and greased? Its the one that opens the compartment to either send heat or cold

[@358317]

The gear that goes on the middle of the A/c Control gears

[@ricardomoreno5178]

Good job, I see each of your videos! 👍

[@bosun9582]

how do you replace the circular gear at 4:04? mine is stuck and very hard to move

[@alihadi6595]

wonder work. i have the same problem, i will try to fix it accordingly.

[@afzacooking4983]

Hi Mackie, Looks like you have an AC/ heater blend door issue (TSB-055-003). It is really tedious to replace it. I would love to see your video on it. Thanks

[@DarkDragonWing]

+Amir Afzal Thanks! Yes, that looks like a lot of work.

[@stayfresh323]

I love your videos man! Amazing work!!!!

[@cliffhooker5208]

I went to the dealer to buy the white shaft to the far left nob. They ordered the center shaft (47.00) that I didn’t need and couldn’t return. They didn’t have a part number for what I needed. You show correct no

[@naveday]

Nice job!

[@hiddenology6655]

That was so great, thanks

[@odabuu]

Amazing video and I'm officially a new subscriber

[@69Phuket]

Mackie on TOP GEAR? (think about it BBC)

[@Medal6]

Maybe... no jk

[@BRY-C]

+the dark dragonwing once again amazing work keep it up bro👊👏💯

[@BRY-C]

+the darkdragonwing

[@DarkDragonWing]

+captain gaming bacon Thanks a lot, cheers!

[@BRY-C]

+The DarkDragonWing I appreciate your response bro keep it up😋😀😄👊💯

[@andrewesquivel]

This fixed my outlander 2003 as well! It's the same system. Thanks a million!!!

[@isakyac7673]

thanks so so and so match

[@fredv3043]

Hey what's with the hole you super glued shut? Is that to lube the blend door?

[@DarkDragonWing]

Nope, someone poked a hole through it by accident.

[@christianbmolina]

Awesome vid! Keep up the great work!!!

[@jesuss7365]

made everything equal to you and the air button heater control is still hard! Could you give me some recommendation? I need help please !

[@DaleSchiro]

Same here. I think the heater box itself is the problem. How do we free it up so it turns more freely?

[@Nongpich69]

Just found this good vdo. My lancer cannot turn on ac blower on speed 1-3, but just only 4 can operate. I found the root cause should be blower resister, but I don't know where is it? Could you please help, or any recommend?

[@benjaminlyons5261]

Your channel is a must watch for old lancers like myself. Thank you for your support to the community. Your video length and clean presentation contribute greatly to the assistance you provide.

[@baitboy3191]

Dude thank you SO MUCH my dealership tried to charge me $1600 for this exact job, and my local garages would either not do the repair or they were charging an equally ludicrous price.

[@ShieldandBucklerMusic]

That's Crazy!

[@nadeemkerdawy]

شكرا لك استفدنا كثيرا منك

[@Paintdizzle17]

Thanks helped me alot your old one helped me too these gears are such pos only lancer owners would know what pos the heater/ac controls are. JDM heater/ac controls are so much better

[@ayrthonsilva5629]

muito bom parabéns pelos seus vídeos.

[@nohcam22]

Been waiting for someone to post a detailed video about how to do this. THANK YOU MACKY.

[@DarkDragonWing]

+Isaac Machon Cheers!

[@ahmadmalkawi9917]

Thanks a lot; very useful vid, i want to ask u what's the number of the white Pin (internal) u changed and where i can find it ? thank u again

[@DarkDragonWing]

Hi. I'm glad to hear! Here it is on eBay: goo.gl/vjmIpM

[@marcoroman4844]

hey i just was doing my now..helped alot!! on last problem is that when i hooked up the black cable back to the link arm,once i switch my knob to cold or hot the cable in the bottom wont push the pulley (link arm)up or down..do i need a new link arm? or what would the problem be?

[@DarkDragonWing]

+Marco Roman You have to straighten it up. And or you will have to help it turn like I did in the video. cheers

[@thedivinetaco3477]

Plz help I have a 2002 lancer that is stuck in neutral. I can change my gears but it doesnt change the gears it just stays in neutral I have done checked transmission fluid what else could be the problem?

[@Erwin150857]

Hello friend, You know where I can get the 2002 Lancer ES Manual? Thank You so much for your videos.

[@rasheed0900]

fog lamp installation in lancer 2005 plz

[@elanabethfariss117]

Hello, I have an 03 Mitsbubishi Outlander with this problem, do you know if the parts, the cable, and gear are the same ones for the 03 Lancer?

[@DarkDragonWing]

I believe so, yes.

[@yoAlpha15]

Your starting to get so many more subscribers now and you deserve it your videos are really interesting and fun to watch!! I've been subbed for a bit over a year now and have loved all of your videos. Great job

[@DarkDragonWing]

+yoAlpha15 Thanks a lot, cheers!!

[@arthurleino]

Looked again it is the Temperature control knob.

[@Oh_You_Know_]

I clicked the link for the AC gears on Ebay, but it says that it is only compatible for Lancers 2003-2007. I have a 2002 Lancer, will those gears work for it? Thank you!

[@DarkDragonWing]

+Oh You Know Yes, it will work on 2002. My car is 2002 Lancer also. :)

[@PedroMedina-y7j]

Y las bonvillas donde las comsigo😊

[@alihadi6595]

the problem with my car AC is that the AC button doesn't give power to the compressor although there is light in the button itself. The mechanic checked the wires as well as the relays and every thing worked well and he advised me to change the whole AC controller panel. So any advice please?

[@DarkDragonWing]

Could be a problem with the compressor clutch itself, not the controller.

[@lethalchaos19]

DarkDragonWing I got a question. After a new radiator was installed to my mitsubishi lancer 2004. I notice the both fan on my radiator wont turn on unless i turn on my A/C. Is that normal? Or i need to address this to my mechanics? Please advice thanks/

[@DarkDragonWing]

It should turn on when it gets hot with or without AC. If you're not having an overheating problem, I think it will be fine. Otherwise, you have to tell your mechanic.

[@lethalchaos19]

@@DarkDragonWing Thank you so much!! My wife drove it about 40 miles from our house and to her work. I told her before shutting off the engine without turning on the AC. She did check and told me that both fans are not turn on. Maybe i need to check the fuse? Please let me know. No over heating the gauge is in normal range. Just wondering if this is normal to mitsubishi lancer. Thanks

[@sa3dod]

fixed my knobs today following your video! Many thanks!

[@troyhill7295]

Suggestions on what could be the case of a 2006 mitsubishi ralliart hesitating when driving

[@DarkDragonWing]

Bad O2 sensors.

[@Prigarin]

Could you please advise, where did you buy this guide pin, which you have replaced at 2:20?

[@DarkDragonWing]

+Anton Prigarin Right here www.ebay.com/itm/331305021707

[@Prigarin]

+The DarkDragonWing Thank you!

[@COLONELDIRTY]

you're awesome man, thank you tons for sharing; you're a big help!

[@tooeazyhicks9929]

I have a 05 Mitsubishi lancer es and im having problems with catching speed when pulling off, can you help with that????

[@DarkDragonWing]

Message here facebook.com/DarkDragonWing

[@Indonesiaaviator]

Where to find this part?

[@DarkDragonWing]

Links in the description.

[@jamessosox9987]

Hey do you know the part number of the black clip you put the plastic part of the control wire back in? I lost it while changing it and now I can’t use heater/ac know to change settings because the wire not holding into place without that little black clip

[@DarkDragonWing]

Oh I don't know. You will have to be creative and make something up to replace it.

[@jamessosox9987]

Thank you so much for responding, you are awesome!

[@mdcEVO8]

I also have a problem with my Evo 8 heater control knob. There is a kink in the cable which prevents it from moving the gears so I have to reach under there to change it from hot to cold and back. I've had the replacement cable for like 2 years now and havent tried to install it because I had no idea how.. Now I know, and knowing is half the battle! Thanks.

[@shauncatania5624]

You just saved me a ton of effort and possibly cost if I had to take this to a mechanic. My knob was jamming and this video showed me where the gears were and it was a 20 second fix. Thank you.

[@Collectnall]

Thank you so much brother. i cant thank enough how much time and money your video saved me. bless

[@G_de_Coligny]

control cables being like bicycle brake cables using teflon lubricant from bike shops on the steel wire might help reduce the friction. this and PTFE grease like ultimox 226

[@Gikecyber]

อยากเห็น การติดตั้ง ระบบแอร์ ออโต้เต็มระบบจังครับ I see the installation of air conditioning Full system + navi

[@Inweezy]

How do u know so much stuff about cars and you know how to do it and not mess it up

[@DarkDragonWing]

+Cliche e I just like to take things apart, and I don't know why I don't mess it up most of the time. cheers :D

[@Inweezy]

yay

[@BELIZE2177]

Whats the package order number of the broken shaft pin

[@DarkDragonWing]

AC Climate Shaft Stem Pin ebay.to/36malyM

[@MrCsCorner]

Perfect! All my problems done for $60 and some time!

[@harrymartinez687]

I REPLACED THE A/C CLIMATE CONTROL,GEARS BUT THE A/C LIGHT DON'T WORK WHAT I NEED TO DO. LOOKS LIKE THE A/C WORKS BUT NO LIGHTS THANKS

[@DarkDragonWing]

+harry martinez You can see the 2 light bulbs there, you can replace them. They probably are bad.

[@harrymartinez687]

DO YOU HAVE ANY VIDEO HOW TO REPLACE IT? OR WHAT IS CALLED SO I CAN ORDERED IT.THANKS

[@DarkDragonWing]

harry martinez I will have a video on that soon. You will need two T5 light bulbs.

[@Maximusgat]

Fixed my gf lancer with a similar video from another KZbinr

[@BBBTVPL]

Holy shit, this was awesome. I really like your vids. You are very talented.

[@DarkDragonWing]

+BBB Thanks!!!

[@mikaelhiatt]

in what position is all the way hot vs all the way cold?

[@DarkDragonWing]

I guess you have to try it out. I can't remember.

[@mrlover013070]

Thanks for sharing your experience with us.. the video is very helpful.. now you have a new follower..

[@SINGLELES]

HELLO SO I HAVE THE 2002 & ONE KNOB IS BROKE OFF & THE BACK DEFROST ISNT WORKING & SO THE AIR CONDITION ISNT WORKING... THE HEAT WORKS PERFECTLY... TO GET MY AIR CONDITION WORKING DO I JUST NEED TO GET A CLIMATE CONTROL PANEL & CONTROL GEARS?

[@REACHAASHKAR]

Bro u showed everything except removing cable,anyway thank u very much

[@MrOMZOK]

nice job on the video. thanks for including part numbers

[@tonyemeriewen5940]

my ac doesn't work at all, when i turn it from 1-4, it doesn't come on, what video can i watch , it a Lancer 2002

[@Abrin32]

like subscribe and comment from another owner of an old lancer. Thanks for showing everything.

A question: You want to transform you '99 Mirage into an EVO IV? That's a lot of money! XD

[@DarkDragonWing]

+Lucas Martínez Parra Yes, haha. And.. I'm still trying to save money.

The DarkDragonWing Okay, hehe. Good luck, Mackey.

[@allanjohn4313]

Do you have the same video for mitsubishi mirage? I got trouble with the heater control unit. Dont know how to get through it as the heater control gear is separate from the blower control gear.

[@schwiftyy4035]

so i did what you have done and know my black cable for the heater and cooler wont move my ac control gears any tips?

[@DarkDragonWing]

Easy way out is to use your hand to move the gear manually. The main cause of the hard to turn is way inside the center box.

[@DarkDragonWing]

These new gears will definitely help. And they will work just fine. The real cause is the heater blend door. Though, I don't think you need to replace the blend door if it still works. Here are some links to buy Lancer blend door. goo.gl/HO24vz The reason for that is because it's a big job to get to it. www.evolutionm.net/forums/evo-general/313774-stiff-heater-temperature-control-dial-knob.html Here is a video that shows how to get to it. kzbin.info/www/bejne/kJXbeWCEns6jhrs

[@schwiftyy4035]

@@DarkDragonWing hey I just looked into it and i actually broke my black line so that’s why it won’t move my gears do u know if they sell replacements?

[@DarkDragonWing]

@@schwiftyy4035 Here look at the part numbers for reference. www.ebay.com/itm/164446195898

[@Shumayal]

Why does this keep breaking so much? Happened on our Nissan X Trail T30. It has a spring loaded mechanism similar to the one in Lancer with white plastic. Where can I buy the genuine parts online?

[@DarkDragonWing]

I'm not sure where to find the part for your car neither.

[@Shumayal]

@@DarkDragonWing do you reckon its normal for these things to fail every 3-4 years or so? We have a Nissan Sunny (Versa) 2014 and it's started to become a little bit resistive on temperature knob.

[@TheMeanestGuy]

I never thought i a million years i would own a jdm car……but low and behold, i have an oz rally edition lancer.

[@Its_about_that_time]

I have an 09 lancer and the passenger side is blowing hot air but the driver side is blowing cold when ac is on. What is the problem

[@septiembre30del2008]

Looks like you still have a hard time turning that ac control knob after replacing the pin, I have the same problem and I think it has to do with the piece where you attached the levers you replaced. I believe that because this 2003 es model did not come with a cabinet filter dust must've gotten inside the compartment and that's what makes it hard to turn the knob. I would like to see you do that repair because it looks very difficult to replace, after that I would cut a hole behind the glove compartment and put a cabinet filter in there because it looks like there's a spot for it. Mitsubishi probably just said "ah fuck it, what's the worst that can happen?" Lol

[@DarkDragonWing]

+Jesus Romero Yes, I will keep that in mind. Many people think it's the blend door. www.ebay.com/itm/Genuine-Mitsubishi-A-C-Heater-Temperature-Blend-Door-Repair-Kit-Lancer-Outlander-/201259997216?fits=Model%3ALancer&hash=item2edc07d820&vxp=mtr ww2.justanswer.com/uploads/supermechanic/2012-02-12_184854_2003_mitsubishi_lancer_l4-2.0l_sohc_-_a_c_-_temperature_knob_hard_to_turn.pdf But it's a lot of work, and mine is working ok since I only turn the knob a couple times a year. I might attempt to change it, but not anytime soon yet.

[@septiembre30del2008]

+The DarkDragonWing that definitely looks like it's the problem, I have the same car only in white but all the same problems. My catalytic converter needs to be replaced and that is an expensive part, I like what you've done to your car I've followed you for a good while and watched all your Lancer videos, keep up the good work! I wish everyone would make their videos like you do. Thanks for all your help!

[@Itsgregguys]

So the Ac button should turn on and off even when not in max ac? Haha my Ac button only works when I put it to max ac

[@DarkDragonWing]

+NigelsucksDick hmm that is weird, it should be on whenever you want. You might need to choose a different air flow on the far right knob there. cheers

[@fadhilmollabux8936]

do you have a video how to change a fuel filter for lancer? please upload or let me knw whetr to find the fuel filtet cos i cant see it under the hood!! plz help

[@aldomaldonadomatehuala7122]

Hi Bro, i change this engine but i dont correct the problem.... You have other option?

[@roikimchi1501]

How do you know to fix all this stuf? Did you learn somewhere?

[@DarkDragonWing]

+Roi Kimchi I just like to take things apart. :)

[@roikimchi1501]

But its look like you learned years!! You are know every part in the car. You're so good at this, keep do what you do you're the best! I'm hoping that you will take your cars to the next level👍✌👉

[@yuriperezraygoza8326]

Hola.. disculpa, yo tengo ese mismo auto y el mismo problema: pero esa perilla que cambiaste , el selector de temperatura, es demasiado duro. Solo puedo moverlo desde el engrane. ?que me recomiendas hacer? .. puedes ayudarme ?

[@aldink4993]

Where can I buy new Knobs for my 2002 lancer? 2 of them were missing when I bought my car. Please reply

[@DarkDragonWing]

+Aldin K Here: www.ebay.com/itm/201242846887?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Look in the description for more links. cheers

[@namjanamja747]

hi, mackey. i want to watch you doing rear drum brake pads, all kinds of gauges, and engine rebuilding. cheers!

[@DarkDragonWing]

+wut wat For sure, if only if I have lots of money. haha cheers

[@Edgarmartinez-uq6mh]

Hey what’s the name of the piece shown on min 2:15 I want to purchase it? Can you help??

[@DarkDragonWing]

AC Climate Shaft Stem Pin ebay.to/3lo8I9Y

[@spoon527]

@@DarkDragonWing do you have to replace the ac shaft pin to install the new control link gears? What if you dont do that and just change the gears? What is the blk cable called do you have a link for it also? I have the old gear set. It's not so great n they warped making the heater ac controls stiff. Is it possible to just change the gears and the cable is just really worn from the bent gears.

[@DarkDragonWing]

@@spoon527 Only replace the gears if other things are still not broken. Look in the video description for the real cause of this hard to turn thing.

[@spoon527]

@@DarkDragonWing thank you sooo much! Really appreciate it! Subscribed!😊 loooking forward to fixing this tysvm. I can't express it enough.

[@hardcoreracing]

Your video was awesome! Thank you!

[@DarkDragonWing]

+hardcoreracing Cheers!

[@DarkDragonWing]

+

[@DarkDragonWing]

+Aoi Ame I'm still saving some money for the BMW. cheers

[@eduardogonzalez6342]

DarkDragonWing Can you do a vedeo on how to change the A.c. compressor for this same vehicle?

[@AlejandroMartinez-ko9is]

i have a lancer ralliart 04 im instaling rpm gauge can you help me were can i get the rpm signal??

[@DY-uy3rx]

awesome video and good work. Gonna do it this weekend.

[@李百麒-q2k]

I have buy a XANAVI NISMO GT-R(R-35)but I don't have any experience with it's body ! Can you teach me man?plz

[@DarkDragonWing]

+李百麒 I'm not sure. I could try

[@李百麒-q2k]

+The DarkDragonWing Thanks man

[@rashad19471]

Hi second vents possible to remove ??

[@DarkDragonWing]

Hi. I'm not sure.

[@SMRM320]

What is your current camera? The Quality is awesome!

[@DarkDragonWing]

+Sahan Methmal Camera: Sony FDR-AX100

[@SMRM320]

Thank You :D

[@tarek200jo]

I'd like you to make an episode about changing AC air filter, please :)

[@DarkDragonWing]

+true call My Lancer doesn't have AC air filter, but I think I can put one in there, it's possible I think. cheers

[@ruudxd1]

GREAT to see you uploading more again!

[@MiniZooTube]

very good video. Our fan control switch just went (burning plastic smell) Used your video to figure out we only need that part to fix it.

[@XchelDominguez]

I need to do this. My a/c knob always gets stuck. Thank you

[@k289iron5]

yea i actually broke it off turning it, so i need to replace the whole unit.

[@Medal6]

+Jayson Laird lel good luck.

[@riksteele997]

Great video! 👍 I have to replace a broken cable on mine. This is a big help.

[@DarkDragonWing]

+Rik Steele Cheers!

[@jaden.sanderson]

What does the Lancer Dyno?

[@DarkDragonWing]

+Jaden Sanderson No dyno

[@carlomedic3249]

My AC rattles (but not continously) when the air direction vent is facing towards front, front and down but not when the direction if directed down (floor). Do you think it is the blue cable that is loose or it is in the actual blend door deep inside the dash? Can the blue cable be tightened so that the flap door of the blend door closes tight?

[@DarkDragonWing]

Not sure. I would check the blue cable first.

[@evapena100]

Dear DarkDragonWing, I have to tank you A LOT because if it wasn't for you I could not have a driving car any more. The pensions are so small, people can not pay for anything else beside a room and food. THANKS TO YOU AND THE KINDNESS OF OTHER MECHANICS IS THAT WE STILL DRIVE, move around for errands and go for groceries!!! GOD BLESS YOU MAKI!

[@flyt240]

A1 machanic ...nice vid

[@farrelbagas7257]

waiting for BMW 325i fix :D

[@nips57]

hi mackey have you work on a blend door for this lancer 03?i just wanna ask if you can teach me how to change the cables. i have a a/c but but i dont have a hot air. thanks

[@DarkDragonWing]

+nipz nippy No, I haven't worked on the blend door yet