iRig 2 review in 2020 - recording into GarageBand

[@damerkman]

(January 2022 ) Just used the iRig2 with amplitube on an iPad. Works great.

[@SpaceMurloc14]

Hi, does it work if we have a bluetooth headphone? will the smartphone conduct the sound thew?

[@damerkman]

@@SpaceMurloc14 Hi Eliot, I haven't tried that

[@Brwinka]

​@@SpaceMurloc14 depends what headphones cuz some have a little bit of delay that just comes with Bluetooth

[@rine413]

@@Brwinkathe Irig hd 2 has Bluetooth?

[@Brwinka]

@@rine413 no bro i was talking about Bluetooth headphones

[@HiggyHiggins]

I agree I still use my in 2023 can’t go wrong 🤘🏼

[@cyclopsmedia8973]

Great tutorial! Clear, simple, to the point and provided the info I was looking for. Great to see a tutorial-review that is well recorded, well paced and well done. Thanks!

[@DarkRoastRecording]

Awesome, thank you!

[@americanbrandon]

Line 6 amp have built in I rig!! For those who don’t know line 6 A with the capability of plugging in your iPhone or android device will allow you to record through GarageBand as if you were using a I-RIG and you can charge your phone at the same time.

[@JoseMichtka]

Thanks Man. How you made this video , we can hear the effects you was listening in your headphones? Tha k you. Because is important to go stream , audience listen these effects. Tha k you again.

[@harryshouse007]

Just aquired my first six string electric guitar since last messing around with a bass, some forty plus years ago. Waiting for an iRig 2 to arrive tomorrow and found your video the most helpfull one for me. Can't wait to get going. Miss those all analogue concerts I saw in the 70s though! Thanks

[@DarkRoastRecording]

+Der Vampir that's awesome! what kind of electric did you grab? also, I appreciate you taking time out of your day to watch this

[@harryshouse007]

@@DarkRoastRecording The guitar kind of grabbed me, as I found it dumped in a skip! It was in great condition and a friend restrung it for me. It's a red Strat copy, but not a Squire. Not sure whether it has been custom-built as there is no branding at all on the guitar?

[@DarkRoastRecording]

+Der Vampir regardless, it was a good find sounds like! have fun playing it!

[@nicholoscolegrove4549]

I have a subscription to Ultimate Guitar which incidentally now has branched to singing as well. When it comes to using an android device With an Irig2 or irig2hd it has quite a bit of latency and that's even using a Samsung with professional sound. However,I have used it on an I phone and was impressed with the latency disappearing.ive never had any success with the amplitude series on any cellphone or computer but I use the Tone bridge app from ultimate guitar ,and that app is free for me and I absolutely love it being able to get the tones I want without having a bunchnofnmoneybtied into effects pedals and delays etc. So I run my guitar into tonebridge on my iPhone and then atraightway from the ŵ1

[@marcaopozza-mendes1397]

That was great! Now I can try mine, and expect success.

[@yona9257]

thanks bro such a clear simple no bs explanation glazing irig or none u r the man

[@caglarkaya789]

This video really was educating. The clarity I need. Thanks!

Kanka aldın mı

[@nunoreis2155]

iRig UA is meant to be used with Android or windows, hence the A at the end. Now they bundled up Android/Mac on iRig Pro and discontinued UA. I'm an Android user, I have a 1st edition and the UA and still have an old iPhone to use with the iRig as it sounds better with lot less interference.

[@DarkRoastRecording]

I appreciate you taking time out of your day to watch this @nunoreis2155

[@edgardohernandez4468]

Thanks so much for this video, bought one from Sweetwater right after watching it.

[@DarkRoastRecording]

+Edgardo Hernandez I appreciate you taking time out of your day to watch this! glad it helped!

[@pinger83]

Something else you could do to make it sound more full is pan the tracks left and right

[@BanksterBeatsNL]

I was searching how to record loops from my samplers to my iPhone using iRig2. This vid was of tremendous help. Ty Sir

[@marcosmurakamifernandes1632]

Great tutorial! I had many doubts about its sound and now they are all clear. Thank you

[@realtalk9770]

Subscribed! Thanks for the info. Just got one of these and you've already been more helpful then the instructions that came with it lol

[@DarkRoastRecording]

+Real Talk Hey there! Thanks for being here! that's great to hear and glad to help! See you at the next video!

[@germonicx1147]

Lol what instructions they were jack shit

[@mysterloop]

well explained, no loss of time:) i just bought this hoping it would work using the regular camera app on iphone xr, and it does. now my signal comes from a looper (headphones out), not a guitar or bass, and i'm trying to figure whats the best gain setting. seems to me the best is all the way up, while making sure the sent signal is not too strong and does not saturate...would you confirm this?

[@DarkRoastRecording]

That’s awesome, and yes i would test it out, turning the gain up on the irig and lowering the input signal in the daw is usually good practice

[@blairpenney3784]

Figured you were from Canada by the accent. You're a beauty thanks for the vid. Subbed

[@SEONNTHAPRODUCER]

Found your channel via the Facebook iPad Musician group. Subscribing to see your future videos. Stay safe, man.

[@DarkRoastRecording]

+# SEONN I appreciate you taking time out of your day to watch this! thanks for the sub!

[@gavinbastian861]

Thanks so much dude I just got guitar tabs pro and I’m checking out what I should use with the Tonebridge app so I’m trying to see what to use for on stage at my church. Would you recommend it for that?

[@DarkRoastRecording]

you could use it for that for sure. :D

[@gavinbastian861]

@@DarkRoastRecording you think it would be good for acoustic?

[@brucebarnes4557]

I just picked one up for $12 at a pawn shop. Good video brother, subscribed

[@georgespringer3897]

I was looking to get one of these for my iPad Pro and band practice. I’ve been using BIAS AMP 2 and FX 2 for my practices and it works great. Only issue is that I have to lug around my only interface which is a Roland Rubix22. The product is great but the only issue is bringing it around with me back and forth between home and band. My question is, would the iRig do a decent job for live processing? Since I’m using an amp sim for my tone I need next to no latency. I don’t care for quality so much (besides, I’m running my other interface in to my iPad at 44.1k) Hope that wasn’t too long of a comment 😆 Thanks!

[@DarkRoastRecording]

No worries my man, I would say if you're going for lowest latency on an iPad, you may want to try finding the iRig HD 2 as its a USB connection instead of using the headphone jack. But really, test it out first with the irig 2 if you have it, if not go for the HD 2. I did a video demoing that as well here kzbin.info/www/bejne/oKSQmYyhf9yHp5o. That said, the irig 2 in this vid doesnt give any real latency either, on Android devices is a totally different story. Thanks for watching and commenting!

[@MandirigmADxb]

Great day brother thanks so much for this quick Demo i just bought my Irig2 today December 10,2020 Greetings from DUBAI UAE 🙏🙌🙏

[@DarkRoastRecording]

Thanks for watching man! Awesome to reach you in Dubai too! Here’s a cheerful 👋 from 🇨🇦

[@Paramasaugata]

Bro im going to buy this in May 2021 😂 🙏

[@gergemall]

Great mic, thx for your video.❤

[@JuusoHoo]

Thanks, goon info, I was wondering does it work with MacBooks as well or only with mobile devices and monoural?

[@DarkRoastRecording]

It does work with macbooks, but I would strongly encourage purchasing an Audio interface like the focusrite Scarlett Solo or Arturia MiniFuse instead, they will provide many more features for a few more dollars. The irig is really meant to be used with mobile devices.

[@ChrisM541]

Thanks so much for this upload. I have an ipad air 2 I've had for a number of years, I also got a good deal on Bias FX in the recent sale so I'm keen on checking out guitar connection options - I think the iRig2 will be perfect.

[@ajithsmusiccenter9766]

Great..I am going to buy..Your Presentation very good. And useful 👍

[@NikolajChristensen]

Thanks for the video. There is no Adda in the device though. It's a passive analog device. Hence the price.

[@stewcon00]

My IRig2 doesn’t seem to work on MacBook Pro. I’ve replaced everything, the irig, the 3.5 to USB C port, the headphones. I can hear it but it’s really choppy and doesn’t sound good at all

[@tonyduran1995]

Thanks for sharing, this will definitely improve my recording. Stay safe & see you...

[@DarkRoastRecording]

Thanks! Stay safe out there

[@danieljames2061]

Hello i have a 2021 iPad Pro and id like to register an ik hd 2 and dont have an iPhone im wondering how to register without being tech savy. Thank you for at least reading this so much more happing to express.

[@cranklabexplosion-labcentr8245]

Everything we’ve done has been thru an Irig. Guitar - pedals - peavey bass head - irig - gb

[@giovannicontarelli]

Hi, thanks for the video. I wanted to know if iRig can be connected to the PC to be able to listen to the bass or guitar on the PC while listening to other things. Type metronome or pieces of music to play on. Thank you.

[@DarkRoastRecording]

I dont think you could do that because it doesnt act like an interface with configurable outputs unfortunately

[@ThePendingontheMood]

Great Video! Was thinking about purchasing. Can you capture audio from the irig2 while doing video??

[@TheRubberStudiosASMR]

great informative video man. Really thankful for this!

[@DarkRoastRecording]

Glad you enjoyed it!

[@boshy_is_loco7499]

Hey champ, great video, very helpful. Just wondering on your opinion between the Irig 2 and the Irig hd2. Have you tried the irig HD2? Do you have a video on it? Do you think it's worth paying the difference between them? I live in Australia and with delivery, the irig HD2 model is around US$ 120 and the Irig 2 model is around US$ 70. Cheers mate, thanks for your help

[@TheAlanWilson]

I got an Irig2 yesterday and can't t get the thing to work on my galaxys10 phone I plug my guitar in and get nothing also done t care much for volume know hard to turn . Been fooling around with it for a couple hours might be sending it back I can't t get it to work.

[@DarkRoastRecording]

+Alan Wilson with new phones, you'll need to use the headphone dongle to USB-C connector, but it won't work with amplitude in android. you have to use an app like "Deplike" or "tonebridge". try those and see if it works before returning it

[@bryceartist0727]

@@DarkRoastRecording im alegally blind guitarist so how tf this thing work? God is alien

[@mikeshort78]

The fishman loudbox amp don’t have a headphone out jack could I use the irig2 so could use headphones ?

[@gracel7475]

I’ve installed an active pickup in my acoustic guitar, can I directly plug it into this interface to do recording

[@DarkRoastRecording]

Yes you can, 100%

[@ralphdominicroque6588]

Irig2 doesn’t work well with ios 16 above. It is having a cutting sound every time i use garage band since i upgraded my phone.

[@zenyuechung8558]

請問老師：我有收藏古董真空管手音機它的聲音飽滿豐富生動，我想用手機錄收音機的音樂發給同好，但手機直接錄聲音又尖有瘦完全失去原來聲音，請問老師我該買那一種麥克風？我只錄老收音機聲音，不錄其他聲音。謝謝。

[@Khakable]

Thank you for sharing and review..

[@DarkRoastRecording]

Thanks for watching!

[@Jones4ever11]

Thanks for the help!

[@BrunoReynoso20]

Just subscribed, thanks for the video!!! I have a question, does it works with Pro Tools as if it was a conventional interface, such as the Scarlett 2i2???

[@DarkRoastRecording]

Hey, thanks for the sub! No, the iRig 2 will nto work like an interface as it is not digital and uses no drivers. It's just sending an analog signal output, nothing more.

[@haynz309]

I'm deciding to get an Irig, is the difference in price of Irig HD2 vs Irig 2 worth the premium?

[@DarkRoastRecording]

I would say it’s worth it as the HD offers a cleaner sound, but depending on what you are doing with it, that may not matter. For recording it may matter, for just jamming it wouldn’t

[@CarmaCasto]

@@DarkRoastRecording I’m recording black metal so quality is my last concern. I’m just curious if I can record electronic drums directly to the app as well using the guitar input.

[@lamboyj9]

it works with the first Irig the old one , and I have an Ipod v8 thanks to you I know what apps to use

[@DarkRoastRecording]

Thanks for watching, glad to help!

[@notan23]

Where do you plug in your heaphones with a 1/4" jack?

[@robertmccourt4830]

Hi, thanks v much for the video, I’ve linked my guitar up exactly as shown but can’t get any input into GarageBand Sam I doing something really stupid wrong? Thanks for any help

[@DarkRoastRecording]

Do you have another device you choose test with to see if it's the headphone jack giving the issue? Like a laptop or phone?

[@lyneicehaynes4922]

I only have a Yamaha piano so that I can write the lyrics from my tablet.

[@lyneicehaynes4922]

I really enjoyed using headset with microphone from Ez Voice because I love singing.

[@MichaelHsieh1]

When I use this I’m getting input from both my bass and internal iPhone speaker. How can I turn off my internal iPhone speaker? It’s really messing with quality.

[@aleksandrajovanovic1170]

Is it possible to connect an acoustic guitar (it has a piezo pickup in it) with MacBook Pro and Boss rc-1 via iRig2...without having latency? Great video! :)

[@DarkRoastRecording]

Should work with little to no latency.

[@babablacksheep8019]

I haven’t finished the video but I have been having a hard time hearing myself while tracking. I can hear the other tracks but not my own, until playback. Then it shows up. Help?

[@sacardevos]

Nice! Tks for the video!

[@DarkRoastRecording]

Thanks for watching!

[@logarithm0]

I tried connecting a iRig2 to an iPhone with a lightning port but garageband won't see any input. I am using an audio jack to lightning adapter. It's a compatible one which used Bluetooth to work, it's not the original Apple one. Is that the reason why it doesn't work? Do I need to get the original Apple audio jack to lightning adapter? Thank a lot

[@normandcormier1136]

I there. I have an iRig2 (and it still works with the AmpliTube app). I’d like to be able to use wireless headphones, but it seems that because of the latency it won’t work. Think it would work if I go wired through a mixer and connect to it via Bluetooth?

[@DarkRoastRecording]

Thanks for watching!! Irig2 will only work with AmpliTube in iOS devices, not android. Regarding the headphones, anytime you add a wireless device, you will be extending the latency. You could try it and see if it’s good, you might be ok, but it’s trial and error

[@ramirezzavala5709]

THANKS MAN GOOD REVIEW 🤘

[@DarkRoastRecording]

+jose ramirez Hey there, Thanks for being here! If you liked what you saw, give me a like and subscribe too, it means alot! See you at the next video!

[@Subilon]

Does it work on jamup xt pro on old iPad?Mine doesn’t seem to.

[@MarceloGarcia9]

I’m able to use the AmpliTube app with my iRig 2. I just get a lot of noise that I have no idea how to get rid of. Might be the new iPad UBC connection requiring a USB-C hub

[@DarkRoastRecording]

It’s possible, if the noise present with s noise gate pedal in high? If so it may just be too loud coming into the irig, bad cable or a loud pickup. I guess just check the things you can to troubleshoot, switch cables, guitars off possible, etc.

[@RoboKat007]

Thanks.. enjoyed the vid. Keep up the good work! Peace.. ( :

[@brunskies92]

Can I use this to pull audio from a Tascam tape deck and record it onto garage band on the iPhone?

[@DarkRoastRecording]

Im sure that would work yes

[@PuiiZo]

Subscribed! Just wondering if it’s applicable for audio recording

[@DarkRoastRecording]

+Miss Zoey thanks for the sub! for audio recording, it just depends on what you may be recording and what mic you have. it's good enough for any line signal like a guitar, bass, keyboard, etc. I good idea with this would be to connect the instrument to a preamp first, the the preamp to the iRig to maximise the signal quality.

[@RHINOSAUR]

Can it work if I have my guitar going through several pedals BEFORE going through the iRig and into my iPad?

[@DarkRoastRecording]

absolutely can work that way.

[@stratslinger3921]

Is there anyway whilst being plugged into AmpliTube via IRig2 to then use another app (KZbin, Solo etc) at the same time? I.e whenever I minimise the screen on iPad it instantly cuts off the sound through Aplitube with headphones plugged in. Seems to be a major flaw of AmpliTube!

[@RoSa-ds1tn]

Hey Dark! Is there any latency with iRig + Garage B. when connecting headphones to iOs device via Bluetooth?

[@drums5434]

Could you also add a microphone to it if you want to sing along with your guitar playing? Or would you have to go back and do that later on a separate track? I’m looking for a device such as this where I can plug two microphones into it.

[@DarkRoastRecording]

You could do separate tracks, but not 2 at once since this is only a single input. Ideally though you would want a USB interface with 2 channel inputs with phantom power option in case you need that depending on the mic you use. for best cheap interfaces, look for BandLab Link Digital or a Behringer UMC22

[@onuro2demir]

is this for only ipad? my macbook air doesn't have any mic in...

[@DarkRoastRecording]

its designed for mobile devices, not computers really. best would be to get a usb interface. Scarlett Solo or Arturia Minifuse would be great for you

[@onuro2demir]

@@DarkRoastRecording i bought it for my Macbook Air and it works. Thanks.

[@johnandersen9219]

Hi, enjoyed the Video. Quick question... can you use the 1/4” out to Amp to feed a small powered speaker and will it match what you are hearing in the headphones. Specially if using Garage Band to practice against recorded backing tracks. For some reason the original headphone Jack on the original IRig will only power Headphones? Thanks John

[@DarkRoastRecording]

That’s right. It will send the audio to anything amp or powered speaker. If you set the switch to fx, it will send what you hear headphones after being processed on the device, “thru” will send the signal before any app processing

[@Bk_cool]

That's so strange bro it actually didn't work on my irig app for android it was cutting out or making a weird lagging sound but when I used it on deplike it ran perfectly without any issues i don't understand what's wrong with it lol yeah i have one for my iMac too and ipad it works smoothly

[@JuusoHoo]

How did y succeed with iMac? How do y connect there?

[@PhatSimey]

Adapter, not dongle! Dongle has nothing attached to it ;-) Good review though, thanks 🙂 I have that exact same guitar strap too!

[@alexreis3615]

Esse dispositivo funciona bem com o Amplitube 5 no computador????????

[@aaronfrazier733]

Could you do an update mine no longer works on garage band…

[@mirkogiuliano4596]

hi, forgive me for the trouble, I have a problem with L irig2 and GarageBand. When I connect the guitar input it doesn't work I always hear that it is recording from the smartphone's microphone. how can I solve it??

[@DarkRoastRecording]

If its an Android phone, that may be the issue. Is it an official iRig 2 from IK multimedia or is it a clone?

[@blazemoyer]

My iRig 2 did not work I could not hear anything through the headphones on my iphone. Saw it was getting some type of signal from the guitar to the app but no sound bummer.

[@DarkRoastRecording]

make sure you have the track set to monitor in Garageband, also make sure you are using the headphone jack on the iRig 2 to your headphones. Could you specify how you have it connected?

[@blazemoyer]

@@DarkRoastRecording thank you. That was issue the monitor switch was not on.

[@michaelhillman4189]

Instead of headphones could you instead plug up a speaker? Like use the IPad/MacBook as a head and a speaker as a cabinet?

[@DarkRoastRecording]

+Michael Hillman thanks from r watching! please sub if you haven't already. you could do that, but your speakers would have to be powered or you would need a pre amp between the iRig and the cab to amplify the sound to the cab/speaker

[@prodbylucifer]

I'm thinking about getting this but not entirely sure if it'll work with my DAW, FL Studio.

[@DarkRoastRecording]

+lucifer it'll work with any DAW because it's just an analog interface. just load any audio track in your DAW and select the input you have the iRig 2 plugged into. but honestly, if you have a digital interface, there's tracking no need for the irig2 as any interface will take a line input from a guitar regardless

[@Andy-cz4xw]

get the irig hd 2

[@serhankalabak]

Hi, how can I use GarageBand and I rig 2 with Zoom H6 . Please help me.

[@818alonzo7]

Could I use the Irig 2 for my phone to my amp just for guitar pedals but I’m my phone

[@DarkRoastRecording]

yes you can, just plug a 1/4" guitar cable from the "amp" output of the iRig to your real guitar amp input and your good.

[@Mr.mekneliusjr]

please does dis irig2 work on roland td27 modul ? because is not workin on my modul i have android fone

[@DarkRoastRecording]

The iRig 2 is a Mono audio device, meaning it cant do stereo sound like edrum kits send audio. You could use a single audio out cable from the LEFT channel and your kit may have a setting for that, or it may default to mono (left) if you only have that cable plugged into the audio output from the drum module. the audio signal will be quieter though since the iRig 2 is expecting a HI-Z guitar signal to the input and only getting a low impedance signal from the drum module.

[@markjohngarcia217]

have you tried to plug it on an amp? does it have any hum problem?

[@DarkRoastRecording]

I have tried that and it has a little hum, but that can be eliminated with a good noise gate pedal. Thanks for watching!

[@kieranjackson9206]

Hi man, awsome video I'm using this on bandlab and I can't here any distortion or fx until after I've recorded it Do you know anyway around this?

[@jeffreyraymondarthur230]

Hi can anyone help me. I tried using irig 2 in bandlab with my vivo y36. I can't correct the latency.

[@DougalMacrae]

I have a question relating to Irig but I’m referring to the first irig not the second ok here we go so I’m recording vdrums through irig is there a way to record in stereo as its only in mono when I record the kit I have is the td9 Roland I can see it has a left and right jack on the module any help would be appreciated

[@DarkRoastRecording]

hey, thx for watching. The iRig 1 and 2 only receive a mono signal as they were meant for a single guitar input. Mono (left output) audio is only way to get a full vdrum kit through an iRig 1, 2, HD2.

[@ReynaldoIvanPena]

Will this be operable to use my Shure SM7b mic for Xbox coming from the Apollo twin mk2?

[@gregtheflyingwhale]

You know its funny. I search for iRig option, because my Blackstar AMP sounds like shit when I try to connect it directly to my macbook. And I don't have a good mic nor the ability to play loud from amp to a mic, so I hope this will do the job. Blackstar sucks or maybe i just cant use it

[@davulcu64st]

Great review but i dont have the Garage Band neither Cubase ect.. Does it have its own software?

[@DarkRoastRecording]

Thanks for watching! It does have its own app only for iOS called Amplitube. There are many add-on you can get as well. that said, if you are using an iOS device, you will have Garageband on it, or you just need to download it for free from the App Store. if you are using an Android device, you could use Cubase or Bandlab on Android to record tracks.

[@Tyler-rf5sg]

So can I plug this straight into an iPad, with just the guitar and guitar cable, and play the guitar through the iPad speakers using garage band? The amp I haven’t isn’t very good but I have an iPad. I basically just want to use the iPad as an “amp” Is all I need this device then?

[@bryy-r3p]

Technically, yes. But it’s recommended to play with a speaker or earphones.

[@bryy-r3p]

@suspicionofdeceit i assume that the adaptor has a 3.5mm jack unless it’s something old.

[@DarkRoastRecording]

only if you are using a device that doesn't have a headphone port on its own.

[@DarkRoastRecording]

best to use the "amp output" 1/4 connection to a set of powered speakers. even just a decent set of computer speakers would be better than the iPad speakers. but technically, yes that will work.

[@8regz3]

connected the electric guitar & earphones on the same side of the irig2 and connected my ipad pro to the other end with a 3.5 to type C dongle. doesn't hear anything from the earphone. garageband recorded the outside sound not from the electric guitar. please help

[@DarkRoastRecording]

I think the issues you are having is related to the dongle. It has to be an apple certified headphone dongle for it to work on the ipad pro usb c. Also, i think (read this right) you have the headphones connected to the amp output, but they should really be connected to the headphones jack same side as the 3.5mm cable going to the ipad. Hope that helps!

[@8regz3]

@@DarkRoastRecording you mean i have to connect the headphones jack to the apple certified dongle? because theres only one 3.5 jack in irig2 and thats on the same side as the guitar jack. can u also recommend an apple certified dongle, what do u use in your setup (if u have one)?

[@DarkRoastRecording]

@@8regz3 sorry, i was thinking the irig hd 2, the irig 2 does have the headphones same side as guitar input. So that’s good. Yes the 3.5mm going into the ipad needs to use a certified apple 3.5mm to usb-c dongle or you will have issues

[@flyme2themoon720]

I'm getting really bad latency with the HD2 into windows 10 recording in Bandlab ..any suggestions

[@javi2859]

Could you use an electric bass with the I - Rig 2?

[@dean-orochester7374]

How can I use this with my Martin, which has a piezo pickup in it? I try it through IK AmpliTube and also Garageband and run the headphone out to my Bose Color SoundLink. It is a great little speaker, but I am looking for a clean sound and there is so much distortion and gain noise. Should I connect the FX 1/4 to my Bose instead of the headphone out from the irig 2?

[@DarkRoastRecording]

Try adjusting the EQ on the guitar to get rid of some noise, and then yes, try sending the sound from the 1/4" amp output to the Bose instead of the headphone jack. the headphone jack is low powered. You may still get noise, so try using an app like Deplike or Garageband and put a nisegate pedal in the chain to cut out the signal noise.

[@dean-orochester7374]

Dark Roast Recording Kool I will try those ideas. Thanks

[@vladlabcraft]

Bass effect + iRig 1 + BandLab + Android (Honor 8x) = work like charm! No latency, decent sound. Do not buy iRig 2 or IRig HD 2..

[@jvnielkophkeeno]

I’m tryna set up shop with bandlab, this is a HUGE help!

[@Official_Hernan]

I just got one and mine doesn’t pick up my guitar

[@nazar2662]

And can I take the wire on one side of jack 6.5 and jack 3.5 on the other and connect it not to headphones or a speaker with jack 3.5, but to a combo box with jack 6.5????

[@DarkRoastRecording]

sorry, i'll need you to be more specific, from what jack to where?

[@isaiahturner8510]

I have this glitch on my iPhone where I get the full mix in my headphones but as soon as I unplug it and play it through my speaker the solo (the middle guitar) disappears. Any idea why it does that

[@qibbsqurnia9657]

Hello sir, i want to buy it..but may i know if acoustic guitar with build in amp sounds good on irig2? Would you recommend?

[@DarkRoastRecording]

It will work with acoustic guitars that have pickups or sound hole pickups as its just an analog audio signal path. Thanks for watching!!

[@danielrozanski8944]

Will it work with bias app on ios as Well through lightning adaptor?

[@DarkRoastRecording]

it will yes

[@vio4jesus]

I was wondering.....what are the alternatives to iRig; specifically for live use??? I want to jump into using my iPad as an Fx processor, however I don't want to drag a big boxy audio interface (like focusrite or presonus or others) around.

[@cirriusk]

irig works well for live performances i think?

[@DarkRoastRecording]

if you're trying to keep it mobile n tiny, the Go Guitar Pro from TC Helicon is good, also the iRig HD2 sounds great. both small and would work great for a few extra $$

[@vio4jesus]

@@DarkRoastRecording WOW!! I didn’t know TC Helicon had an audio interface. The challenge is I want both Audio and MIDI. The MIDI is used to change patches /presets and things. I use Xtone by XSonic…..but sadly (and perhaps not surprisingly) the foot switches trigger a MIDI message on release rather than press.

[@felipefernandes000]

How does it work to use pedals with the iRig? can I connect a distortion pedal before the iRig without burning it?

[@DarkRoastRecording]

Thanks for watching! Ive done it and it didn't hurt anything, but it may depend on the type of distortion pedal you're using.

[@boshy_is_loco7499]

Also I forgot to ask, do you know if the HD2 model is compatible with amplitude on Android as well as IOS? Thanks again

[@DarkRoastRecording]

+Gabriel Notti hey man, thanks for watching! I have not tested the HD2 model so I couldn't speak on it from my use, but I have heard it's pretty good with almost no latency, due to the on board processing. I think the android version of amplitude is only good with the UA model now, but check IK MULTIMEDIA'S site and it should say there for sure.

[@kurosan592]

Important question, can you plug the adapter into a laptop

[@DilluLohar]

Can I use for my laptop. I want simple video with clear sound like yours to do video podcast and post on KZbin. Please help!

[@DarkRoastRecording]

you could, but I would recommend a USB interface, there are a few for under $100 that work perfectly for what you're going to do

[@وهيبالجبرتي-ن5ظ]

I want an irig 2 piece how i get it

[@nadromero6724]

Amazon

[@ritchie376]

They're all sold out in Amazon, I just got one off Sweetwater

[@foxyzorritoplayer2220]

Ritchie Serafin lol i got it from sweet water too