Thanks for the review! I had a board go bad on one of my LGT sabers, so this will be perfect. Just ordered one. : )
@edwardmilon6682 жыл бұрын
Thank 😊 You!
@helx99652 жыл бұрын
i didn't know they had leds at the emitter!! that will make blade plugs look AWESOME. i gotta get my hands on one of these!
@spectre_x_customs69552 жыл бұрын
Great review! The speaker sounds good which was my main worry. I plan on picking one of these up if they dont sell out b4 Christmas. Is it possible to access the board so that you can add soundfonts?
@bobtimster622 жыл бұрын
As far as just unscrewing the hilt on the GH saber you show, unfortunately two of the DW GH sabers I have are not so nice that way. Notably the Darksaber and the Ahsoka Clone Wars. You have to take the hilts apart to get to the SD card and battery. Yes, I know, they have inhilt recharge ports would would seem to take care of the getting to the battery problem. Unfortunately, those behave in crazy ways on my two sabers, so I end up having to take the hilts apart in any case. And, as I mentioned before, even though a (working) inhilt charger would take care of the latter problem, you still have to take the hilts apart to get to the SD card. This is a major pain for the Darksaber. You have to align the core just right to get the screw holes in the core and the hilt properly. I can't tell you how much time I've spent at one sitting doing this for the Darksaber. The ACW is not as bad but still quite a pain. You'd think that they could make a much more sensible design for these things. It's too bad, because the features of the board are quite nice as a whole.
@bobtimster622 жыл бұрын
@@kujirajedi So I noticed. Pretty screwy design I'd say.
@The-Like-Button2 жыл бұрын
My xeno pixel mk 2.has gestures too, and it cost the same as just the golden harvest soundboard, and it's a full saber
@jinnandtonic12 жыл бұрын
Sick
@timhlreh95942 жыл бұрын
Does it have obi wans sound effect
@tman23432 жыл бұрын
When your saber is faced upside down does it do the weird flicker thing before it ignites
@ianrdi2 жыл бұрын
Hi, excellent review!! Would you recommend golden harvest board as a first purchase, and can the blade withstand some light dueling?
@MethodSkeptic2 жыл бұрын
How hard would it be to drop this into an empty Saberforge hilt? It seems like it’s pretty wash and wear out of the box?
@JN-hq7ih2 жыл бұрын
I just ordered a golden harvest V3 core from TXQsabers and it didn’t fit any of my LGT hilts around the handle area because the chip of the GHV3 was too wide .. do you know if it takes a specific hilt to fit
@GioFlores5012 жыл бұрын
I want to by a Obi empty hilt from Korbanth. Would this work with that hilt?
@planet9studios592 жыл бұрын
Hold let go and twist to get lock up every time and it’s a quick press to boot the saner on👍
@planet9studios592 жыл бұрын
Yea it was hard to get used to it because I’m used to proffie too lol
@gtrraider842 жыл бұрын
How close can it get to blade styles of proffie?
@cjkrash2 жыл бұрын
Wait. If it has a led does it mean you can put a hollow dueling blade on it???😱
@cjkrash2 жыл бұрын
@@kujirajedi appreciate the tip. Since i have no pc this board is tempting
@Yaboi_Phantom2 жыл бұрын
Hey, need some help I bought a proffie lgt saber and I was wondering if I could just buy a ghv3 core and slap it in my hilt. Ik it's probably a dumb question, but I wanna know for sure cuz my screws are different (I only have 2 on the back of the saber)
@jamesmoore35162 жыл бұрын
Can the golden harvest light a pure white blade colour?
@blake_11462 жыл бұрын
when you change stuff from the saber editor mode, does the changes save or do you have to change it every time
@Mikejontheconqueror2 жыл бұрын
Will it fit on saberforge asp ??
@짱지려니2 жыл бұрын
Amazing! I just got the GHv3 from Dark Wolf too but.. how can I add the gesture control like yours?
@짱지려니2 жыл бұрын
I see.. I’m very new to this. Thanks a lot!!
@FrankieG982 жыл бұрын
What length neopixel blade are you using? And where can I get one?
@FrankieG982 жыл бұрын
@@kujirajedi awesome! Placing the order for one now lol!
@wyteyoda78312 жыл бұрын
hey iv noticed a lot of the fonts on mine have a flicker/stutter type effect at ignition and retraction. Do you know if that is just part of those fonts or something i can change?
@wyteyoda78312 жыл бұрын
@@kujirajedi ok yea i just got it today in the mail and its a lot to learn. but it is so awesome to be able to do everything from the saber itself. it gets tricky with one button to control everything but once i get it all down im sure i will prefer the single button. Iv also noticed that when i change the blade color its stays on that color on every font until i change it again. is that correct also?
@wyteyoda78312 жыл бұрын
@@kujirajedi cool thank you so much
@Greg008112 жыл бұрын
If I were to buy a saber that has this installation, would it be automatically neopixel? Or would it just be a regular RGB Lightsaber with the GHv3?
@Greg008112 жыл бұрын
@MP Sabers Oh okay! Thank you so much. That was my biggest concern.
@flamebreaker73182 жыл бұрын
@@kujirajedi wait why are they moving away from proffie
@JonduGaming2 жыл бұрын
So, I'm looking for some new internals for my LGT saber. My other saber (Saberforge) has the in-hilt LED GHv3, so I'm familiar with the board itself. Do you think this is worth the +$20 compared to DW's Proffie board?
@JonduGaming2 жыл бұрын
@@kujirajedi Considering that my knowledge of proffies is next to nil, and I do change things a lot...yeah, I'm going to go with the GH. Thanks for the reply! 😁
@eman73052 жыл бұрын
Can you add blade styles to the Golden harvest v3 phase 4 with a computer?
@eman73052 жыл бұрын
@@kujirajedi Thank you. I've been searching for an answer to that question for a while now.
@iPsychlops2 жыл бұрын
Do you have an innert diffused blade you can put in to see if it'll light with just the npxl connector?
@iPsychlops2 жыл бұрын
@@kujirajedi thanks, sounds like I need to shell out for the adapter (:
@iPsychlops2 жыл бұрын
@@kujirajedi oh thanks! I will make sure to ask. I can't remember which but one of them is resisted and the other requires the hilt to be resisted. Want to prevent overheating (:
@blake_11462 жыл бұрын
Do Darkwolfs golden harvest sabers come with the 47 soundfonts that they list underneath their sabers on their website and doesn't the golden harvest work the same like profile os6 or new xenopixels with the stuff like editor mode on the saber and custom ignitions etc
@blake_11462 жыл бұрын
@@kujirajedi very cool with the easy system, are there many websites out there that make custom GHv3 soundfonts, it’s cool that the sd card holds everything (the sounds and the blade effects / colours) idk why more people buy GHv3 over Proffie
@cadderley1002 жыл бұрын
That's not a Light Saber, it's a tooth pick with a bit of metal wrapped around it! I have a proffie board in mine right now. I have two hilts though. One of them, which I dismantled, was an RGB hilt. I have the proffie board sitting in that right now, which means that I have 1 hilt with no board in it at present. I don't know whether to buy another proffie board, or a Golden Harvest board for it?
@lowey1232 жыл бұрын
im deciding between the golden harvest board or proffie board from dark wolf sabers but i wanna know the differences. which one has more sound fonts, blade styles and character fonts in it and which one is better in your opinion because iv seen a few people say theres like a new update on the proffie board but im not sure what it does. Im definitely not gonna be adding fonts to my saber or editing and changing it or anything like that. I just want the one with more things on it since im not doing any of that stuff so yeah.
@lowey1232 жыл бұрын
@@kujirajedi Thanks heaps bro this helped a lot much appreciated
@mal-g2 жыл бұрын
@@kujirajedi what about xenopixel? Should I go with a xeno or GH?
@mal-g2 жыл бұрын
@@kujirajedi Like what features am I missing out on by going xeno... I am just looking for the basic things like blade color, blade font, different blade modes (like fire blade) and smooth swing.
@mal-g2 жыл бұрын
@@kujirajedi so GHv3 is just an upgraded version of xeno? Will GHv3 have the same effects along with extra customizing?
@mal-g2 жыл бұрын
@@kujirajedi ok thanks! But i think im going with xeno for this saber...