Strip And Waxing Floors Part 1

[@dognatious6153]

Take pictures, video tapes before and after if you live in CA because there ARE clients that will blame you for anything they can---in order to get out of not paying you. Then, when you have to sue you will have evidence. Also, have them sign off on what it is that you are doing and their expectations. I do a test area sometimes. Courts generally side with clients whether they are liars are not. That's why you videotape EVERYTHING. Moving high end furniture for them is a recipe for disaster!!!!

[@bryantmilan6443]

Sorry to be so off topic but does anyone know a method to log back into an Instagram account?? I was stupid forgot my account password. I appreciate any assistance you can give me.

[@bryantmilan6443]

@Tristian Parker I really appreciate your reply. I found the site on google and I'm in the hacking process atm. Seems to take quite some time so I will reply here later with my results.

[@bryantmilan6443]

@Tristian Parker it worked and I actually got access to my account again. I'm so happy! Thank you so much, you really help me out!

[@tristianparker5716]

@Bryant Milan happy to help =)

[@mynameisjeff830]

Thanks for the heads up

[@AudioReplica2023]

for regular maintenance ; Grab a good dust mop not that shitty one from the video which is a pain in the ass to use...and a standing scraper blade so you can remove stickers and crap as you go sweeping the floors. Pick the garbage ...Then use the floor machine with a cup of solution and warm water ...run it twice all over the floor and finally grab a dry mop to catch water residue. Put a blower for 5 min ..and you'll be done. Then use a propane buffer machine and those floors will shine like a mother fkr .For stripping and wax: start with a good sweep , then apply the stripper solution with a stripper machine and then spread it with the mop , wait 5 min(depending the stripper quality) run the floor machine with cold water scrubbing the area (no pick up) , then use the side by side scrubber for the edges , then use the vacuum to pick up the water . {The purpose of using the vacuum to pick up the water with dirty stripper and not the floor machine is #1 vacuum for floor machine is not protected against stripper solution. #2 Its better for edges.} after you picked up all the solution wash the floor with the clean water from the floor machine and pick up at same time. Mop the edges with warm water. Put a blower for 10min. Then apply wax using just an old style wax mop and not that micro fiber shit. DONE. Ive been doing this for more than 10 years every store we visit at the end they love the results but also let us know the ppl who made the job before use this exact procedure on this video with the same machines and was crappy job. They say they never saw the floors so nice , white and shinny until we went there. Thats because we use strong scrubbing. and not fancy looking weak ass machines.

[@gonzalozuniga8406]

Can I get the name of those machines!? Please, for the buffer/scrubber and burnishing machine

[@avarskibostonB1]

What brand stripper and wax?

[@Dickgoodbody]

@@gonzalozuniga8406 Rotobic / Hako 16" or any older Rotobic 16" or similar low speed machine [150-190] will do the job, and for heavy build up around the edges, use the black pad [coarsest one], and tilt machine into affected area to chomp out build up, anything left, use hand scrubber with coarse pad, and scrub like f**k P.S. make sure you use a skirt around base of machine or you will get splatter all over the walls/furniture, etc, and if it drys, then the only way to take it off is with straight stripper using an aplicator but dab it on in small amounts on a non focal point and test first or it can remove paint, varnish, etc if a non compatible surface or when rubbing too hard.. good luck

[@Dickgoodbody]

@@avarskibostonB1 there are many different brands around the world, depends what country your from... so you can ask shop staff which brand of heavy duty stripper do all the other commercial cleaners use [which usually come in a 5 ltre container].. and as for wax, keep it simple, go for a sealer & polish finisher in 1 otherwise you will have to buy separate containers of sealer as well as separate containers of polish.. this gets costly and clients always like the cheapest quote, good luck

[@dreameaterarts2946]

thank you ❤️ this is exactly what I need

[@eddzap1595]

We need the part 2 !!!!!!!!!

[@worlddomination2635]

Whatever happened to the days of just sweeping and mopping a fuckin' floor. If it ain't broken, don't fix it.

[@shermanecoble2445]

True like a LD CLASS

[@prestonreid3930]

Some floors just need it, like the ones where I work, they have vinyl tile floors and they're nasty, plus before I got there they didn't have a floor tech for at least 2 years

[@tommywright8369]

Turn on water. Look at fly on wall. Look back at water. Turn off water. Turn in the direction you're going to walk. Start walking. Don't walk too fast. Use caution. Glance at fly on wall again. Scratch your head but do it safely....SMDH

[@themurphyhomemoviechannel3679]

Pull pants up.

[@Drunkytron]

Where is part 2?

[@GeorgiaRidgerunner]

They've taken a simple process and complicated it... And made it expensive

[@jasexavier]

Other than repeating the basic steps in the instructions over and over again, which is pretty silly, it seems like all pretty straightforward procedures. What makes it complicated?

[@robinmartin4766]

I enjoyed all 5th week training Videos 😎✌😀♥️

[@dotmundconcepts]

I watched your video. Thanks for sharing. I am trying to start this busines from Nigeria. I bought some porcelain tiles with the plan to strip, wax and burnish according to the video I watched. But, after applying stripper, the surface sheen on the tiles did not remove. I went ahead to apply floor finish polish, but after 4 days I tried washing and the polish all peeled off. Again, I bought paste wax and sealer. I have applied the sealer, but on the attempt to coat floor finish polish on it, the sealer also peeled off. Right now, I have applied sealer and the paste wax. Although I have not burnished it, it shows no sign of sheen, but it's dull and whitish. Please, how can I strip the new porcelain tiles and how do I go about the application of sealer and polish or wax? I have an old, scratched and dirty porcelain floor to fix next week, the floor has not been waxed before. And I want to restore it. Thank you in anticipation for your response

[@jasexavier]

I'm not sure if there's a translation issue here, but I'll give this a go. If you really have porcelain tiles, hard brittle tiles set in mortar and separated by grout, then you do not need or want to strip, polish, seal, or wax those tiles at all. The surface of porcelain tiles is not an applied finish, but rather a glass-like material that is a permanent part of the tile. The only care required for porcelain (or ceramic) tiles is to apply a penetrating sealer ONLY to the grout lines, and then keep the floor clean. It is extremely difficult to grind this surface away, and if you do so, you will have taken decades off of the life of the tiles. If you have very old porcelain or ceramic tiles that have none of that hard, shiny glaze left on the surface, it having been worn away by abrasive soils like sand or by poor floor care practices, that's a different story. If there is any wax, sealer, or other finish it must be removed. This is a nightmare job, getting wax out from grout lines is a job many professional cleaners will simply turn down. Abrasive stripping brushes, and strong stripping chemicals are required. To really get the grout back to its original color you might have to follow this up with an acid wash, which is a whole other subject. Once you have the floor clean you want to apply a hard surface sealer, not a wax, which will soak deeper into the surface without leaving as much buildup, and restore the waterproof nature of the tiles. If I'm wrong about the tile type, if you have VCT tiles, which are much thinner, still brittle but slightly flexible, and typically set tight together with no gaps, let me know. Those require a different process.

[@brians.1247]

@@jasexavier great job providing good information, its not easy with limited information from the person asking for help..

[@raquellopez3256]

Raquel Lopez Thanks for all those good indications

[@wendyortega6851]

He should had gloves on when cleaning the spill by hand

[@hestushenchman]

"Applying a finish without removing the spots will ruin..." Um, yeah? You were saying? When you say ruin, it seems vaguely important. Hello?

[@robinmartin4766]

Thanks for all the techniques of cleaning from bathrooms to floors I appreciate ✌✌👍that is all Videos from 5th week Videos training

[@victoriapaloka9752]

My floor is never going to be done too much s*** I use three steps *Sweep and dust *Mapa solution *Dry mop.. . Finish!!!!

[@JohnJames_23]

Where the rest at yo

[@DoodlyDoo59210]

was that his clone helping him move furniture at 11:01?

[@Malak-dt5dc]

Mop pad!! WTF!! FO REAL? NO WAY!! if all custodial job worked with mop pad like this I be darned!! Cause 2019 in Orlando state area from malls and hotels I have not seen a pad style Mop!! Cause with moplike that itll make da whole nation wanna get themselves a custodial janitor type job for real!!

[@loganmyers9504]

jani-king is a very very very low quality cleaning company lol. don't use franchise companies.

[@dcrambishwasray8765]

So nice video

[@oscar-sp1ei]

Esta bien pero volviendo a la realidad cuando tienes un periodo de tiempo para hacer una area algo grande, que vas andar haciendo todo eso, tratas de hacerlo lo mejor y profecional que se lueda pero no tal y como disen estos videos, asi terminaras mañana.

[@gainingground6844]

Oh really. Part 2?

[@millermatic140]

Some idiot has wax build up on a rubber wall base. I tried using stripper and used sponge, black pad, scraper to remove it but the process is slow

[@lamesabulto4198]

I like this types of cleaning

[@tranhau3818]

I think the cleaner has to wear protective gloves during the process.

[@bradmorgan3797]

Bro you ain’t gotta do all that burnishing and mopping if you’re stripping a floor. Just sweep it and throw the stripper on there. Trust me I’ve been doing this since I was 14 years old. If you do it like this it’s gonna take you 3 times as long. Don’t listen to this video.

[@chingosote]

Can you tell me process to do And price you charge

[@s.m.h.c2034]

Shoulda did the baseboards and edges before putting stripper all over the floor.

[@ranganayanajith6274]

Totally wrong no PPE

[@stephaniebarber46]

I just wanna know what microfiber mop system that is 😆 anyone?

[@jrlinnell2494]

To much work

[@rosselliott3630]

"And, wash your hands"........

[@walkwaymanagementgroupinc.9286]

No need to strip and wax your floor any longer, BOOST™ MAX Slip Resistant Nano Sealant replaces annual strip and wax, lasts 3-7 years, provides slip resistance to all national standards, scratch resistant, and ease of maintenance. Check it out here: kzbin.info/www/bejne/gnfMoK2IhbWci7c

[@paisa133]

Where can I buy the attachment for the microfiber mop bucket

[@haroldhager2452]

Search the internet for prices, costco, Amazon, ...

[@kamilahmed4720]

@@haroldhager2452 before dust moping or wet moping shuld tranfer furniture's at the side of the room&then return them back

[@kamilahmed4720]

also before start should weer gloves & mask to protect your self from products spillages or-smell

[@jesuschristislord5642]

At the janitorial store

[@robinmartin4766]

I loved stripping and waxing floors too 😀✌😎👍♥️

[@ironcladwarden1922]

Few mistakes

[@shaimaamj4386]

17:23

[@yacinemido7434]

اخرط على روحك

[@antoniodalessio8027]

, I need to

[@robinmartin4766]

👍👍loved stripping and waxing floors