DAYTONA CRUNCH!!!

At this point, I’m not even sure if we should take this to Daytona

[@dintexas2095]

I don’t know what Hanna charges for her labor, but it’s not near enough. Hanna you are a treasure to Cory. You two are my favorite videos. ❤ 😊 THANKS !

[@g-man7938]

lol.

[@RBPx1]

Just wanted to let you know that as well as all of y’all’s awesome builds y’all have also built an awesome channel. Always look forward to your next video. Keep up the amazing work!!!

[@madmex2k]

Love this build, it coming along reallly well. In Oklahoma you have to hav permits and signage showing you are hauling possible exploding tanks of welding gas on the trucks. Secure the heck out of that stuff.

[@teddysmith457]

All I got to say about all this is Hannah is a hell of a hand and a wife to have around . You are truly blessed Cory.😊

[@jdubyou007]

It's really entertaining to see the huge amount of work y'all get done on the truck in every video. Ain't scared of getting your hands dirty, grinding and working into the night. Mad props to you two.

[@SeansNewWorld]

For the old taillights you can buy just the covers, they are a stock Ford part for stepsides. You two have a safe trip and happy Thanksgiving

[@danw1955]

Heh heh, what a cool old Ferd! Back in the 1990's, I used to drive one of these with a 534 cu. in. V8 gasser. It would literally pass everything but a gas station.🤣 About 3-4 mpg. pulling a 35ft. flatbed.😲It originally had a 4 bbl. Holley with a built-in governor, which we replaced with an adapter and an Edelbrock 4 bbl. and the mileage immediately jumped to 8 mpg. and ran so much better!😉 The one we had was a N.M./Arizona truck all of it's life and was pretty much rust-free. Someone had taken the time to do a really nice paint job on it.. a 2 tone red and white, and the interior was bone stock and perfect! It had a 5 speed and a 2 speed axle, which was geared just right for the big old gas burner under the hood. Some Mexican truck collector spied it when were in El Paso one day after dropping a load of scrap metal and offered us twice what we paid for it, and my boss sold it the next day!😄

[@keithfosbery7489]

I love the welding truck. You guys work so good as a team . I enjoy watching always !!

[@RR-iv6fm]

Good build/ preparation for your event Cory and Hannah. That Fordonational will be a good tow/ service rig.

[@billkasten1004]

You should check state laws , in some states its illegal to transport gas an oxygen bottles without the caps on!!

[@bigrockauto]

Cory don’t want to touch the grease - Hanna bare handed spreads the grease!!! Cory what a …….! Can’t say it!!

[@lorenmeyer5290]

Have a great safe trip! The truck is awesome! Happy Thanksgiving y'all!

[@teddysmith457]

In the trucking industry, those mirrors are known as West Coast mirrors, you can find them a lot at the time at truckstops in the truckstop stores and they are expensive there but sometimes you can find them there. You used to be able to anyway nowadays who knows haven’t been in a truckstop for years, just thought I’d mention that

[@Pure_KodiakWILD_Power]

Even if you take it as is, people will dig it. I still say paint the bumper and grill white. Probably the wheels, too, unless you're gonna put on some pretty chrome wheels.

[@paulsmith6002]

Hannah, good job on those wheel bearings. Proud moment

[@RandyColeman-i4w]

You guys have a safe trip and keep us with the great builds

[@larryreece1403]

I love the Turkey Run! Great event and a good time!

[@GodisgoodLeoIneke]

Have a great and save trip 🙏💪✌️ the truck is awesome ❤God bless!

[@RAAservicesllc]

Love the truck yall are Killin it with this thing, yall may have answered this but where is the 41 dodge.

[@robertstevison1448]

Prayers for safe travels yall !!!! Please take your time !!!! Always enjoy your adventures !!!!

[@632Harrison]

Nice job Enjoyed your video, keep up the great work and I will be looking forward to your next video May Gods Blessings be with you always

[@tommyjefferson9525]

The truck looks like it's running really well have a safe trip love the video you guys have a fun time and keep us in your thoughts thank you

[@sergiogarcia2361]

Checking in with CWC injoy watching your videos.

[@georgegalbraith9899]

Yes I am a Gangster,,lol,, Glad you love the chips they are a staple in Evansville along with Ski

[@cooldaddy3431]

Love to watch your videos guys, don't ever stop to do what you doing!👍 P.s. I missing the bloopers, would be nice to see some.🙂

[@timpellett9701]

Safe travels! We’ll be watching you. Have a great time. Looking forward to the videos!✌️

[@edsecorr7812]

Great job keep up the great work love your videos thank you

[@thebeardedone1225]

I think that drier just needs a check valve screwed in it to stop it after it purges. Kinda likes on a regular air compressor

[@johnrice7350]

We missed you at Daytona. We wanted to see that rig. Hope you guys had fun.

[@tonypatrick9362]

God bless you both and your in my prayers

[@JoeBush-w7j]

Have a safe and fun trip.

[@deniseprettner2020]

Good luck and Happy Thanksgiving.

[@tdetrucks]

Cory the truck looks amazing she has i good eye for what it turned be have a safe trip, the model guy.

[@vicswanby454]

Corey you really need to quit cutting by your body those grinders are no joke... Just trust me on this one. Accidents happen in the blink of the eye and can really be a bad deal. I just had one of those freak accidents happened to me and now I'm recovering from surgery on my left hand makes it real hard to do damn near anything like I'm used to. Thankfully I had a 96,000 surgery to put my hand back together and it will be a good year before I regain full use of it. Just please think about that. I would rather be an example then to see you have to suffer through a recovery process. I like your channel and I like the stuff you do.

[@justinmize4316]

Need an old Lincoln Shorthood welder for that truck.

[@terrysteelman6860]

Still a sharp looking old truck

[@lpayne0]

So cool when you opened that box and it had a 12 pack of ski they are really big in our area so the next time you go to lake cumberland and get close to Hodgenville you can have a ski and smell our butts from a mile away, your friends from Arrowhead BBQ!!

[@DirtFloorGargae]

You guys like them trucks, you should go over to what the rust, there is one over there with a service bed a v6 of all things .I think he said owner I selling all cheap alot of trucks but that one was very cool and had a crane on the back

[@DroooooopDead]

Looks amazing you two

[@teddysmith457]

Corey needs to get a short bus ha ha ha😂

[@davidechols6797]

Good luck be safe on your trip

[@Kangenpower7]

What engine are you running? And the transmission? It looks like a lot of speeds! Great looking project. I wonder what miles per gallon you are getting.

[@tlr-nut7275]

DT466.

[@MrVonklous]

48:48 the cats even got their treats, lol

[@RANDYSMITHOU812]

You should have the caps on your cutting torch set

[@paulbrooks9327]

Safe travels guys 💪👍

[@vinniegillotti9347]

You should’ve talked to crossroads and got the rubber grommets for your tail lights, or got the ones that rivet on

[@DennisN1959]

praying your trip goes well. Don't forget t have fun!

[@stevensilver1014]

God speed safe travels enjoy

[@brentpowell8322]

Love the West Baden Hotel!!

[@RandyDayman]

Cory safety glasses shield cannot replace an eye. Hope to meet up with you guys sometime safe trip. God bless frim Ontario Canada

[@garymeyer1162]

Could Hanna shift not useing the clutch?that might make it easier for her🤠 2:28

[@tlr-nut7275]

I only use the clutch to start and stop. Easy to shift those without the clutch.

[@ericpeterson9051]

Corey do you know that it's illegal to drive around with no caps on your oxy and acetylene tanks

[@kevinpulliam8029]

Can't imagine driving that that far would be so uncomfortable

[@lisaplummerhattabaugh1302]

Oh my…. You both have your hands full with these builds but you always figure them out! I’m only a phone call away if u need extra help. And you dont have to film me😉momma isn’t photogenic. Lol

[@mikebuckley5740]

Corey you need to take those bottles and put the caps on before transporting please

[@MichaelMaxim-ft5sv]

Lots of work. SAFE TRAVELS

[@robertstevison1448]

Guys just take a step back please !!!! I have found that when something is fighting me to hard just take a step back !!!! Sometimes a deadline will cause to much stress just take your time and let it happen !!!! Take it from an old guy !!!! You will get there !!! Please don't let these challenges make you make mistakes that will cause trouble along the way !!!! Just seeing from the outside yall !!!! No pressure no mistakes !!!!! Pressure leads to mistakes !!!!

[@mocreekin6976]

Love y'all videos I was just thinking it would be awesome to see a colab with sleeperdude

[@RaymondCoggins-xd2re]

Looking good sure wish I could be there

[@pinkladybikermamma3603]

LIKE THAT YOU JUST DRIVE THE TRUCKS AND SEE WHAT COMES DOWN THE ROAD WITH THE BUGS

[@tarbaby6571]

Love it

[@baconcreek609]

Mag drill for the win

[@daveandrews6085]

Traveling mercies 🙏

[@timsutterby9899]

Save heartache the headache save it til its proven bro , age comes wisdom.

[@MacsSpecialitiesMotorsports]

6:15 Safety Third! lol

[@barryadams68]

Those are 53 to 60 Ford stepside brake lights.

[@ronaldsteveson76]

Won't y'all knock that clutch out going all the way to the floor?😊

[@gregorycatren3442]

Hope you have an awesome trip trouble free...it's not legal to have your gauges on your bottles....

[@brentlance2379]

They are never fully finished are they???

[@Pure_KodiakWILD_Power]

No artist ever is 😂 We just kind of pry our hands off the work and call it good enough....

[@jamesmallinger9555]

P.S.have a great trip 😊

[@rcracer55o]

U guys need caps on ur welding tanks in case u crash so U don't blow up..

[@kenhall3159]

put the caps on those tanks or dot will grab you

[@fredk.2001]

Pet the fur-babies for us!

[@terrysteelman6860]

Use wheel bearing grease not ep 2 grease

[@alkennedy1124]

Coming from a guy that dose not jam gears at all, ,,, you should not jam and or Force the gears in the in to gear, thanks BigAl California

[@taylorneilson3326]

You guys need to practice not using the clutch. First and Reverse should be the only time you use the clutch

[@jonathanbrogdon9067]

Mineral spirits will clean up that window crap better than anything we at daytona if I see you I will yell!!

[@samcanter1806]

Corey hands always black🥴

[@edwardsmith-uk8tf]

that welder truck looks killer, dont forget the safety caps for the Acetylene and oxygen tanks. have a safe trip

[@alkennedy1124]

Just make sure you put the safety caps on the bottles, thanks BigAl California

[@phafinley3052]

You guys are brave LOL

[@michaelrichetta638]

Amazing people the both of you and the work you get done in the amount of time spent. Safe travels, great video, CWC gets things done !

[@carlstephens-tm7zj]

Cory you need to put the safety caps on those torch bottles. Anytime you transport them from your cart or anywhere. And I hope Hannah put some weight in that can so it doesn’t blow out of the holder. Ya’ll need to think about safety first when transporting stuff

[@paulbehne914]

The bottles need to be capped, secured and PLACARDED or the DOT Man gonna getchall.

[@ohhiguy]

In addition to DOT concerns, your personal well being is at stake. The way I understand it, one fitting broken off can cause a bomb like explosion, and the other makes it a bottle rocket and flys thru the air.

[@davevoorhees5994]

Yep! I don’t tend to ever call out mistakes but that’s a definite safety concern.

[@seantbr2019]

Carl you need to mind your own business

[@jasonanderson6714]

Cool rig/video.safe travels enjoy the show.

[@tomweber8729]

Happy Thanksgiving 🍁🦃 Have a safe trip and fun time

[@tomweber8729]

Looking forward to the video 😎

[@announcementman9399]

Great job on all the detail work getting the Welding Rod ready for Daytona. Happy you are getting to go and lots of prayers for a safe trip there and back🙏Prayers that the truck runs well with no issues. Have a Blessed Thanksgiving and enjoy the ride🥰

[@stansmith1911]

It sounds like a In-line 671 Detroit. 6+1 Eaton trans. Yes Cory some of those air dryer do that. Good looking N model Ford. That brake valve is hard to get to. Back in 1974 I made a stubby wrench for the air line to that valve. I still have that wrench today. As long as you do not lay those tanks down you can transport them safely. If you lay them down it becomes a hazard. Then they must have caps. I like your channel. When I was young my wife worked right by my side just like Hanna. She helped me rebuild an inframe job on a 8v71 Detroit and she was pregnant. She out worked two men and she was a tinny little thing. I have a 1966 c50 flat bed dump. I have to do the brakes on the next go round. I hope you all made it ok.

[@kenstevens5675]

Looking great. Hope you’re having a great time in Florida.

[@alkennedy1124]

Thanks guys hope you are Hana good happy thanksgiving, thanks ,,praise Jesus Christ grace amen 🙏 thanks BigAl California

[@JSK91606]

Hey guys! Love watching you two work together! Hannah I know it's a silly question, but what brand of boots do you wear? Safe travels in FL... have fun!

[@rodztorations5869]

I have a set of tale light lenses for the tail lights that have the funny shape. Nos. Y'all can have them. I'm in Louisville I can send them to you or if you all are coming down this way I can meet you all.

[@RushingForwardAdventures]

Awesome truck, Hope you have a safe trip, but for God's sake remove the torch regulators along with your Argon bottle regulator and install the transport caps. Several have commented on the torches but the welder tank also needs capped. If you have already left for Daytona I am sure there will be several gas suppliers along route where you can get some. Enjoy watching your channel but you really need follow some safety practices.

[@kawrider750]

Shouldn't you guys have CDL's to drive vehicles with air brakes and / or busses?

[@Randy-ru5rk]

Hey homies another great video you two together are a bomb never a dull moment for sure!!

[@Smokeroux]

We late to the show. (Just in from deer camp) GREAT VIDEO !!! HAPPY THANKSGIVING to YALL TOO 🦃🦀🐟👍🏼🏁🏁🏁. What was the cat eating from the box?

[@m.hildanhildan41]

Keep go on❤

[@FloridaCrackerKustoms]

If y’all need anything near Jacksonville Fl on your trip or a shop to work on your rig if anything is to go wrong feel free to hit me up. My shops always open to fellow car people. Look forward to seeing y’all at Daytona, the car club I’m a member of is the biggest club inside the show.

[@phafinley3052]

You need new brushes for your grinder

[@DyeDoe]

Cory what will you build without your eyes? 4 god sakes wear safety glasses!!!

[@richardpugh3434]

Most people don’t learn till it’s too late.

[@destinationyeahya4404]

Just found you guys today… binging and loving your efforts! Rusty gold pieces of art. Keep up the great work. 👍

[@vernthomas6802]

Hanna you are a dream wife !! Great job, safe trip guys ! Happy Thanksgiving !!