‘Abloy Classic’ Pick & Gut using my $3 Disc Pick.

[@thelockpickinglebowski633]

Nice work. Yeah I'm interested in seeing how the pick is made.

[@dazevers]

Thanks mate, I will get the video up next week, with as much info in as poss. Have a great week.

[@chriscapune7873]

Brilliant picking and tool!!! Love watching you pick these locks!! Looking forward to seeing the tool making 😀 Stay safe my friend Have a great weekend!!!! 🐾🐈🐾🐈👍😷

[@dazevers]

Thanks Chris, they are fantastic locks to pick open, the Abloy Classic pick tip are a little tricky to make but well worth the time. I will get the video ready for next week. Have a good one Chris. 👍

[@lmhhunt8939]

That's a great job picking the abloy classic lock with the homemade lockpicking tool👍.

[@dazevers]

Thank you so much I really appreciate it. Have a fantastic week my friend. 👍

[@VicsPicknLock]

Nice work Daz I've never been able to pick that type of lock. Have a great weekend 😁👍

[@dazevers]

Thanks mate, Nice to hear from you, I hope you’re ok. Have a great weekend.

[@chrisevanslockpicking9241]

Beautiful work there Daz mate 👍🏻

[@dazevers]

Thanks mate. I really appreciate it. These Abloy tips & tensioners are pretty tricky to make, but worth the time to be able to pick these fantastic locks. Have a great week Chris.

[@dascue777]

Good job. I’m trying to learn disc locks. Its hard to learn nothing like pin tumbler

[@LockpickingsGal]

Amazing job picking!! Love the pick and can’t wait to see your next video!!

[@dazevers]

Thanks my good friend, I will get the video ready for next week. 😎👍 Have a great week.

[@RookKnight]

Fantastic as always, Can't wait to see that video on your pick. Just an awesome job getting that open👍

[@dazevers]

Thanks mate, I will get the video up next week, with as much info as poss. Have a fantastic week. 😎👍

[@RookKnight]

@@dazevers in excited, I probably won't be able to make one lol, but at least I'll have some directions And thats sometimes half the battle. Take care my friend 👋

[@EdocDab]

Great job as always Daz 👍 Looking forward to the tool making video as well. Have seen a tool much like this made but forgot who showed it. If I had a lock like that I'd sure make one. Lot's of fun 👍🔓

[@dazevers]

Thank you so much my friend, I will have the video up next week. I hope it helps more people to get the tools to pick these fantastic locks. Have a great week my friend. 😎👍

[@BilLVeR]

Good morning my friend. Very nice video and job 👍 Have a great weekend.

[@dazevers]

Morning my good friend. Thanks for watching & commenting, Have a fantastic week. 👍

[@billnormand7470]

Wow! Ablloy classic. Daz , you make that look much easier than it is. Simply brilliant! Homemade tool as well. Another great video. Have a great weekend

[@dazevers]

Thank you Bill I really appreciate it. They are wonderful locks to pick open, they really do give fantastic feedback a lot more than people expect. The most challenging part is to make a pick tip & tensioner to access the keyway. Have a great week Bill.

[@user-xm1nq6oy3u]

Excellent pick Master 👍🔓 Bravo 🙂👍

[@roysammons2445]

Excellent picking skills again Daz. You made a very difficult lock to pick look easy. Some of the gates on the disks looked a bit curved and some flat (angled). Very nice job too on the home made pick. Looking forward to the making video. Thanks for sharing this lock with us.

[@dazevers]

Thanks Roy, they really do give great feedback, & a definite difference between the false & true gates, the biggest issue is getting the picking tip right. I will have the next video up sometime next week. Have a good one mate.

[@TallanPick]

Great work, great picking and great vid Daz my friend, I´m very exciting about these locks and now I will be able to try to pick them thanks to you ;o)) Hope to have time soon to start with them, thanks for showing ;o)))))

[@dazevers]

Thank you my friend, i know you will have a lot of fun with this lock, the feedback is great & your skill is awesome. Have a fantastic weekend. 😎👍

[@waynejoynes589]

Brilliant video Daz, a lot of thought gone into that pick mate . Looking forward to that vid. Stay safe and keep up the good work. 👍

[@dazevers]

Thanks mate. As you will see in my next video, I’ve designed the pick in such away that anyone can make one with the minimal amount of tooling. I will get the video up next week. Have a great week Wayne. 😎👍

[@SesamoPicking]

Fantastic picking Daz, and nice tool! Thanks for sharing!

[@dazevers]

Thank you so much my friend. I really appreciate it, have a fantastic week. 👍

[@PocketWomen]

Very nice picking with that great pick you made. I look forward to the video on how you made it. Have a good week mate, cheers

[@dazevers]

Thanks my good friend. I’ll have the next video ready soon on how I make my disc detainer pick. Have a great week PW.

[@RuneInternational]

nice pick. too bad it is so hard to get picks for the classic and the profile keyway.

[@dazevers]

Thanks Rune. I will upload a video soon on how I make my disc pick, & the Abloy tensioners & pick tip. I’ve not made one for the profile keyway yet, that’s my next project. Have a great weekend my friend.

[@TheButchersbLock]

Great picking mate. That is an awesome tool you have made and I can’t wait to see the video on how you made it. Stay well mate👍🇦🇺😊

[@dazevers]

Thanks mate, I will get the video ready for next week. Have a great week. 👍

[@JoguroPick]

Gran trabajo, amigo Daz. La ganzúa está perfecta Y eres muy bueno con las cerraduras de disco. Gracias por compartir. Saludos. :)

[@dazevers]

Thank you so much my good friend. Have a great week. 😎👍

[@Gazz_R]

Awesome picking, pick and lock. Looking forward to the 'Pick making vid' :). Thanks for sharing Daz and have a great week mate.

[@dazevers]

Thanks mate, I will get the video up next week, with as much info as poss. Have a great week mate & stay safe. 👍

[@Gazz_R]

@@dazevers That's great:)

[@lockpicka69]

very nicely picked like always and looking forward to your next video and hope you have a great week

[@dazevers]

Thanks mate, I will get the up sometime next week. Have a great week. 😎👍

[@dominicparadis]

nice job !!! You got me hyped on making myself a pick now.

[@dazevers]

Thanks my friend. I will get the video of how I made this pick uploaded this week. I’ll also go through this Abloy tip & tensioner. These locks are such fun to pick. Have a great week. 😎👍

[@lockhackeruk900]

Very nice indeed. I have yet to pick an abloy.

[@dazevers]

Thanks mate, they really are fantastic locks to pick. The pick tips are a little tricky to make but not too bad. I will get a video up next week. Have a great week. 👍

[@adamacromen]

Nicely done👍

[@dazevers]

Cheers mate. I really appreciate it. Have a fantastic week. 😎👍

[@ieyasumcbob]

Wonderful stuff! Can the cores on all Abloy Classics be taken out like this?

[@CoxysPicks]

Awesome job Daz 👍 Those locks are still mind boggling to me. Great job 👍 Have a great weekend buddy 😎🤘

[@dazevers]

Thanks mate, they are great to pick, & really do give great feedback. You too have a fantastic weekend.

[@Lockpicker1973]

I love that pick mate. You did a GREAT job on getting that lock open. I still haven't been successful with disc detainees.

[@dazevers]

Thanks mate I really appreciate it, I have a video going out later today on how I made this pick. It’s really easy & cheap to make. Have a great weekend my friend.

[@Lockpicker1973]

@@dazevers Thank you for all you do for the community. Have a great weekend too 😀 😊

[@JONSLOCKPICKING]

Great workmanship on the pick. One question what steel are you using for the picking tip? Or what’s the best steel to use? And great picking as always 👌

[@dazevers]

Hi mate, I’ve used Stainless & mild steel for the picking tips & found that the mild steel is by far the best, it’s a lot stronger. I get mild steel tube 6mm OD 4mm ID . The tensioner is made from a 4mm injector pin. I will get the video ready for next week with as much info in as poss. But if you have any specific questions just email mate. 👍 Have a great week

[@hillbillylocksport5547]

Damn that pick is bad ass!!! I'm making one right now...might have to redesign lol

[@dazevers]

Thanks mate, i will get the video ready for next week to show how I make mine, so I hope it helps. The Abloy tips are a little tricky to make but worth the effort to be able to pick those awesome locks. Have a great week my friend.

[@hillbillylocksport5547]

@@dazevers ordered an abloy Kik cylinder and I'm still working on my set of tools ... My buddy rook knight got me into disc locks and I love em.. ohh yeah if I don't use too much more solder I'll be right around 3$ too.. that should be a challenge for people... The three dolla tool

[@tipenengapuhi]

Great stuff Daz

[@dazevers]

Thanks mate. The Abloy tips & tensioners are a little tricky to make but worth the time to be able to get these locks picked open. Have a great week mate.

[@KeylessEntry]

Very nice homemade DD pick👌 Would love to see the video on how you made it. I have a couple of profile cams with butterfly discs I'm struggling to make a tool for. Have a great day my friend👍😀✌️

[@dazevers]

Thanks mate, I will get the video ready for next week, & make sure I have as much info on the pick & picking tips/tensioners as poss. But if you need an specific question just email, I’m always here to help. Have a great week.

[@KeylessEntry]

@@dazevers Really looking forward to the video😀 I'm finally getting around to making my own DD picks or modify my cheap Chinese ones. I'm sure I'll have plenty of questions along the way lol. Really appreciate your help and have a great week also✌️

[@countrybowwow]

Hello, my friend. Your video is fantastic. Thank you for sharing a good video. Take good care of Corona's health and have a happy day.👍65

[@dazevers]

Thanks you so much my friend m, I really appreciate it. Stay safe & have a great weekend.

[@ccmogs5757]

Nice version with that removable core , good one mate :)

[@dazevers]

Believe it or not I’d been after one like this for ages, so very pleased I got one. Also please I managed to get it picked. Have a great week mate.

[@DonzLockz]

Awesome as usual Daz. Sorry, I wasn't getting notifications buddy. Cool how you make your own tool too my friend. :)

[@dazevers]

Thanks Don, I have a video on how I make this pick, going out today. Have a great weekend mate.

[@lockpickingindependentant-2919]

Un'apertura super 👍

[@dazevers]

Thanks my good friend. Have a fantastic week. 😎👍

[@obijanjebrave]

Professional level video my friend as always, but that could not be said for Abloy, since I don't see the point of not putting all disks with false gates?!? I don't think that would increase the price of manufacuring.

[@dazevers]

Thanks mate, I was a little surprised to see that not all disc’s had False gates I must say. But I guess they think that getting the tools in the lock first was a big enough security feature.... not in my lab 😊 I hope you are well my friend, Have a great week. 👍

[@BrummieLockPicker]

Excellent picking Daz 👍

[@dazevers]

Thanks mate, these are fantastic fun to pick. Have a great weekend. 😎👍

[@BrummieLockPicker]

@@dazevers I’m a good few leagues away from them type of locks

[@Uniquettt]

@@BrummieLockPicker but not for long i bet with all the great tutorials available 👍👍👍👍👍👍🔑🔐🔒🔓🏆

[@Djohno2701]

It’s hard to get hold of those ejector pins!

[@philthejet]

Great vid, thank you. If you could send me your mailing adress and your logo, I will gladly make you some stickers to thank you for all the lockpicking education you put on KZbin.

[@huxleypig69]

You made the tool but please don't forget who designed it. Capt hook made a different tool and there are a couple of other designs that work too.

[@dazevers]

The design of the pick tip & tensioner work an absolute treat, they are also great fun to made, even more so when these locks pop open easily :) . The profile pick that capt hook made works well to, I’ve made a different one than his, but of course they both get the job done. Thanks for watching & commenting I really appreciate it. Have a great weekend.

[@Libralocksmith]

Like this

[@jamessones4044]

These are the BR keys. Cost me £100 for a copy. The closest thing I will get to a mortgage.

[@tarehjernetarehjerne4082]

Great job with your pick. Is your tensioner one piece? Also I refuse to believe that is a $3 pick :)

[@dazevers]

Thanks my friend. Yes the tensioner is one piece, it’s made from a 4mm injector pin. You are probably right about the $3 it is probably more like $2, I will have a video up next week on how I make my DD pick & the Abloy tip & tensioner. Thanks for stopping by I really appreciate it, have a great week. 😎👍

[@tarehjernetarehjerne4082]

@@dazevers right. The ejector pins. I make mine from rods and they are super annoying, was about to ask how you did it. Also just in materials that would be like $16 for me. You got a good source

[@dazevers]

Those 4mm ejector pins are truly fantastic & ideal for these tensioner. The picking tip I make from a bit of 6mm mild steel tube. admittedly they do take a bit of time to make, as yours do I guess, but well worth it to get these locks open. I will put as much info as poss into the video, but if you have any specific questions just ask. 👍

[@Leonslockpad]

great job Daz mate you sound a bit ruff hope your ok🤟😎🇬🇧😊👊👍

[@dazevers]

Cheers Leon, Have a awesome week mate. 👍

[@David_11111]

YAY

[@dazevers]

Cheers mate. Have a great week. 😎👍

[@MKHITARIANVahram]

👍

[@thumperlockpicking9269]

Nicely picked, ì really want to see the making of the pick. I got the Chinese picks to and need to see how they are modified. Thanks for sharing

[@dazevers]

Thanks Thumper, I will get the video ready for next week, I’ve designed the pick in such away that anyone can make it. 😊 Have a great week. 👍

[@lpm55]

Wow your good I’m a lock picker my self but your good iv picked on of them before tho

[@dazevers]

Thank you so much my friend, I really appreciate it. Have a great week. 😎👍

[@SamolPramanik]

340 scooter Tala Khula Dam Koto Kotha power Jai Kim to have a Jana.

[@SamolPramanik]

Tala Gula Dam Koto Kotha power Jai.

[@SamolPramanik]

talagula Dam Koto comment box

[@JourneymanRandy]

Nicely done Daz. It seem well made that lock. Have a great weekend.

[@dazevers]

Thanks mate, I hope you’re well & have a great week. 😎👍