DBT4 FWD Recumbent Trike Walkaround

A brand new 2013 build and assembly video! We do a brief walk around on the new DBT4 FWD Trike. We explore the new trike prototype and describe some of the features. More detailed videos will be coming for each section. We raced the new design prototype at the 2013 HPV Race America event velodrome in February 2013 and made a splash at the Catrike Rally! We have been working on new "production" units this year, so stay tuned!
We've been getting a lot of subscribers lately and these new videos should build some excitement of what's to come.
David Bruce
aka scbvideoboy on the BROL forum
www.dbtrikes.com

[@budaramma]

You have done some impressive engineering here and my hat goes off to you. That being said, there are so many possible ware and tare points of failure with so many store-bought parts that have been modified service would inevitably become a nightmare. If this trike is only for you're sole use I see no problem and say well done but if you intend on selling them I truly would have reservations. Its a beautiful bike none the less, well done. I hope over the years you have realized and addressed the concerns I have raised here as its an interesting design. There is a reason multi-wheeled front-wheel-drive anything has been a pain in the azz and that is because if its complexity vs rear-wheel drive. I'm in no way saying the rear-wheel-drive is better just it is simple with few points of failure. If you can produce quality standardized replacement parts to customers without delay I can foresee success but if not I foresee a lot of aggravated customers in your future.

[@seaa3seaa]

Just beautiful. It seems that the front end might be adaptable to many styles of back end. It could even be made into an amazing velomobile. I don't want to take away from what you've accomplished; my mind says WOW and sees potential for wide acceptance, I think you are on to something. Great job.

[@ronarmstrong835]

Well done. Better than a lot of manufactured bikes I've seen.

[@zorroinhell5549]

This trike should be mass produced! What a great build, very original!

[@MJQuintana]

Greatest trike design. I can only dream to have 1 of this. DBT4 is really an awesome accomplishment.

[@scbvideoboy]

Thanks, I've heard from a lot of folks who bring up the velomobile aspect. The split frame concept will allow use of different rear frames as well, one reason I made the front frame and base plate a little beefy.

[@parjacpar3077]

One of best looking home made trikes i have every seen

[@scbvideoboy]

Thanks, can't believe I did that a year ago!

[@parjacpar3077]

I had a project to do and one person thought id do it other thought i wouldnt and it involving eltrical systems . . proved one right and one wrong that i did do it

[@teddylee3465]

Wonderful design.

[@mikeoniones667]

That front derailleur has quite the jump between gear rings

[@happyangus1871]

Can wait to see it test film

[@ggrreeggy]

Would be interesting to see how the pivot point/shock in the middle effects control dynamics and ride at speed.

[@runcycleskixc]

Bruce -- is there a differential in the FWD? Regarding the McMaster universal joint shafts: how smooth is the pedaling? What is your opinion on universal shafts vs CV joints?

[@josemoosbauer604]

What design work and what quality of construction !!!

[@chuckeynewkirk199]

Look Mom no hands street legal got to love it spring is coming

[@Samqdf]

Somehow Dave you have managed to outdo yourself. For a guy who is a perfectionist you seemed to developed and made this pretty quick. I have not seen this type of leading swing arm suspension on a trike before, I wonder why? It seems like a very practical design that can be made to have a low seating position unlike most other designs.

[@bryduhbikeguy]

Love the design overall.Really like the 'modular' aspect of the mid-frame assembly point.I'd like a four wheel for loads,and the 3 wheel for year round use.(it snows allot here, and the front drive would pull me right along).

[@Dare2Doubt]

What a great evolution since the S-327! I wonder though, why mechanical front brakes when hydraulics have so much better modulation, especially when running a dual set-up?

[@kiwiwombatman]

nice engineering !

[@iksralquyuud]

That's awesome! Hats off to you, mate. Would love to see this in production soon. One thing I am really interested in re your design is the stability when going downhill (and I am talking steep slopes here) at considerable speed. Tried doing that with your prototype? Cheers!

[@rogerunderhill4267]

Love it! I would definitely buy this design if it incorporated a rohloff hub gear or a pinion gearbox and belt drive. FWD together makes my ultimate machine.

[@doren8491]

I definitely want exactly as you spec'd

[@user-sr6qx4ht5i]

Very nice! Amazing quality!-Where did you get such axels for front drive and differential? Thanks in advance!

[@chuckeynewkirk199]

Yup!!!@ some took the time!!!

[@thelastwheel]

Considering you had a differential could you go with a driveshaft instead of the chain? Could you imagine a 2-rear wheel driven shafted velomobile?

[@kokopelli314]

really good work and lots of interesting features. Are you planning on making frames for sale?

[@laurabenevelli6783]

It's a really great design. Have you thought of trying to make it out of carbon fibre to lighten it up? It is strong and would take off some weight.

[@omarmedda8593]

Bellissima

[@craigrmeyer]

Believe me I'm impressed, but can you elaborate a little, please, on why you went through all this effort? I can tell that you really wanted to see this to completion, but can you tell us more about what your motivations were? I'm just gobsmacked here.

[@armenfeuchtenbock2471]

Super.

[@juananzola4165]

good a question could be made double type transmicion that is the tracera and at the time of this in the mud work with the rusticos that with a lever they put the vehicles to go out and walk easier in the mud I wait for your answers and if you can about drawings or something done as an example

[@rdkuless]

are the front wheel drive flex couplers like a pto on a tractor..?

[@canamm]

Now that is a beautiful piece of machinery! It's a shame it's so heavy, perhaps some carbon is in it's future...?

[@yourrightiamwrong9643]

A very fine work. Doesnt look home made at all. Are you thinking about building a more allday everyday trike?

[@buynsell365]

Great looking machine but where is it? The website you list is not working.

[@craigrmeyer]

And finally, where did you get the green and yellow polyurethane springs/dampers from again? And also the metal pieces that press against them?

[@chuckeynewkirk199]

Chinatown

[@Migueldeservantes]

It looks to me like a truck load of money have been spend in the design/manufacture of this beautiful machine.. I really hope you manage to reappear it!

[@slavyan8171]

Nice project! And ... weight?

[@Dare2Doubt]

37 lbs

[@davidnguyen5215]

Where you can find a dealer for or you have to order online 😍

[@GreyWolfeOutdoors]

I know this video is 6 years old but, dbtrikes.com is no more. I wonder what happened?

[@craigrmeyer]

Did you cook up that suspension mechanism yourself, or did that come from elsewhere? If elsewhere, I'd sure appreciate knowing where that was.

[@chuckeynewkirk199]

Its state-of-the-art computer aided engineering with a little finesse a whole new frontier but try to add the suspension and you add a ton of weight I like it slick lean with new Concepts that's my opinion no big deal

[@data9309]

@@chuckeynewkirk199 check out the David Ashenbrener recumbent tilting trike

[@brucewmclaughlin9072]

Wot's this no road demo? Nice trike although uss is a bit more to my liking.

[@zorroinhell5549]

I wonder, how much would a trike like this cost made of titanium?

[@myperspective5091]

Did you you settle on a price. $4000-5000?

[@robappleby583]

Well it's beautifully made, but why? Much more complicated than a conventional rwd design, and the steering/suspension seems overly complicated with four headsets... I'm not seeing the utility. Also does it have a diff? I wonder whether the fwd design suffers from wheel slip on loose surfaces. Anyway, well done with the fantastic fabrication quality.

[@chuckeynewkirk199]

Breaking the law breaking the law and now we're trying to get to Mars but yeah man power to Traverse the universe is based on man's foot power weights and measure gravity polls all of us

[@Martin-xb2rz]

Are there CAD files available?

[@elotroespectador]

How much it costs, you can send it to an address in Miami

[@supremeflagship8965]

That is an awesome trike. I wonder, what are the advantages of forward wheel drive compared to a rear wheel drive setup? I suspect that you can't climb steep hills with this setup (while climbing hills 60% of trike + rider weight will be distributed at the rear wheel). So would it make sense to go 3WD (three wheel drive)?

[@truthseek1790]

Good thinking 99, if a little difficult to pull off! That would certainly cap off an already beautiful trike especially for those with traction problems in the snow..

[@data9309]

Utah Trikes made a three wheel drive.

[@carlashley5706]

Hold on did U say front wheel drive thats nice that way different tell me more......?

[@carlashley5706]

Question..? Will U ever build an fattire trike or 4x4 quad......?

[@armenfeuchtenbock2471]

Hello liebr Mr. I want to buy a fahrreder from her. Please what does it cost?

[@arrowblades8295]

all i can think of while riding is "please don't break, please don't break"

[@scbvideoboy]

LOL maybe you should create a real profile

[@jacklemon4816]

I like you video and you created... #DavidBruce imagination for me for make one like yo do. Can you send me detail of you bike front wheel.. please sir

[@thebentley71]

if it had rear steering it would not need trans axles

[@benwhite3227]

That’s exactly what Sidewinder Cycles did.

[@OmarLozadaBrio]

Cuanto vale

[@kmsebike27]

zo'r

[@arrowblades8295]

did you purposely make it complex so that no one can copy your design? Or so that someone on a long tour can break down in BFE, and not be able to fix it until they get a replacement part... that you need to cnc machine in 3 days and send to them fedex overnight? and by then they are so pissed off sleeping and waiting in a cockroach infested hotel....