DC SuperShine Battle of the bars - How to polish aluminum (Episode 2)

Hey Guys in this video I chose 3 popular companies and wanted to see which bar worked best for me.
DC SuperShine Battle of the bars - How to polish aluminum (Episode 2)
with Koccur Yellow, Marpol C106 and Jackson Lea/Ozborne Yellow
Huge Thank you to Denny at Rainstrick Farms for letting use their location to shoot today. :)
For UPDATED Products and tools plz visit my website www.dcsupershi...
My Favorite Tools:
Dewalt DWP849x Variable Speed Sander Polisher bit.ly/40yLWS9
High Speed Backing Plate bit.ly/3QF8ADA
Flanges bit.ly/3MGxRMy
Rake bit.ly/3MJdqPg
My Favorite Products:
Sand paper bit.ly/467S7xC
DC Super Shine One Step Cut and Polish bar bit.ly/49wW69R
DC Super Shine Blue Finishing Bar bit.ly/3udKEjj
DC Super Shine Heavy Cut Buffing Wheel bit.ly/47tuZL0
DC Super Shine Flannel Finishing Wheel bit.ly/47ocEiE
Liquid Metal Polish bit.ly/3sohoWF
DC Super Shine Kits bit.ly/40AdhmI
Video: Jack Sliter
Editing: Jack Sliter
Facebook: / dcsupershine
Instagram: / dcsupershineofficial
Tiktok: vm.tiktok.com/...

[@rubenparedesjr3412]

Great information. I like how you test things out, and you seem to give us your honest opinion, no gimmick

[@DCSuperShine]

Hey Ruben! If you’re the guy that left me a message on my Voicemail today!!! Thank you!!! Very much appreciated m!! And thank you watching :)

[@rubenparedesjr3412]

@@DCSuperShine cheers from Florida friend.

[@user-un5my5bw4j]

I use the Marpol C106 pink bar regularly for my first cut on aluminum. I actually switched to it from Menzerna 439T. Its a little greasy but not like the Menzerna 439T which is extremely greasy. Never tried the yellow jackson lee, i believe the yellow is can be used as a one step

[@joec5649]

Hi this is Joe Chevalier I like and watch a lot of your your videos and I've been doing polishing for couple years now and I'm starting on a lumina box dump truck it has some clear coat on it now I'm just wondering what grit and all that I should do with it I talked to you before and year ago so you help me out quite a bit and I did a airstream with your help it turned out beautiful I trust your word and then most of these other I really appreciate it

[@DCSuperShine]

Hey Joe, I’m pretty sure I remember you! If the whole box has a clear… 🤯😩 you’ll need to strip it first or if you want to sand… test what works, I normally use 180 to remove coatings… but if you can get away with starting at 320 on something that size it will save you lots of time… I hope that made sense. Thanks for watching

[@joec5649]

yeah I'm trying to get your address or phone number where I can order some of your supplies

[@michaelguthrie2723]

Another great video Denny. Question for ya. What would you use just to touch up on wheels and tanks? Truck washes are pretty tough especially tanks with scratches. Thanks

[@DCSuperShine]

Depends on how bad the scratches are. If they are light often you can get them out with liquid metal polish. If they are more pronounced then polishing by machine might be need… sometimes even sanding again. Hope this helps. Thanks for watching!

[@rtz549]

They make gloves for aircraft riveting that are padded to handle the vibration.

[@rtz549]

On that polisher, undo the 4 big bolts on the aluminum end. You can add grease to the ring and pinion in there to make it more quiet and run more smooth/less vibration.

[@DCSuperShine]

Has nothing to do with the grinder. It’s the pads! All good I won’t be using those pads anymore. I have my own now :)

[@markhutchinson8474]

Yeah guy you're full of shit and it also causes a huge mess and it will have nothing to do with vibration crazy statement from a guy that doesn't do it everyday

[@user-un5my5bw4j]

Thats exactly what i do to my polishers. It will make any polisher run quieter and not heat up so much. Hell most grease from the factory in them looks like its just vasoline. I get all that out, clean it good with carb/choke cleaner then i load it up with Castrol Pyroplex Blue high temp grease or what i really like is Chevron Delo blue grease. Regreasing a polisher with quality grease is an excellent tip for anyone

[@rolandocastillo85]

I've been using marpol for over a year now I was using mendzera and thinking about switching back that marpol likes to leave cutting line even on color I use that crx green to finish

[@DCSuperShine]

Like I always say! If something is working why change it? Thanks for watching

[@stevelarson5136]

where does one buy a rake like yours

[@DCSuperShine]

Most aluminum polishing retailers have them. If you can’t find any send me a message on fb

[@stevelarson5136]

thanks very good video's

[@DCSuperShine]

Thank you! And thanks for watching

[@naveenmanuel1563]

How do they compare to Menszerna? SS polishing videos would be nice

[@DCSuperShine]

I’ve been using Menzerna for years… I no longer use Menzerna! And not sure what you mean by SS polishing? :)

[@naveenmanuel1563]

@@DCSuperShine SS- Stainless Steel

[@DCSuperShine]

Lol I knew what SS meant … just forgot for a min… getting old! :) Thanks for watching! Much appreciated :)

[@robertmoore9559]

Great video Dennis, have you tried the green heavy cut Marpol? I’ve sanded to 800, cut with the Marpol purple pad/ green cut bar(C64???) rake my pad and do a quick dry pass…. I find it to be a great finish, for a quick single stage polish, a quick pass with their flannel and super gloss (finish) bar, happy clients all day long. So many variations of bars and pads to use, comparison vids could go on for days LOL!!! Love watching you video! Great work!!!

[@DCSuperShine]

Hey Robert, did you mean the C94??? If yes, I have used it and it’s good but not great for my style of polishing. And yes absolutely battle of the bars could go on for quite a while! I’m just trying to do the more popular brands and bars… :) Thanks for watching!

[@user-un5my5bw4j]

I like Marpol's bars specifically the C106 pink bar and Volax finish blue bar. I use to be all about Menzerna but Marpol works better for me. I will try the C94 green bar with one of my 10" Marpol purple wheels too