Programming Car Remotes for Hyundai Elantra 2007-2010: Step-by-Step Guide

Program Hyundai Elantra Keyless Fob with Xtool D7 Scanner | Video Tutorial
In this video, I'll be showing you how to program car remotes using a D7 scan tool by X tool. I personally bought this tool and it has been extremely helpful for me. I'll provide links for you to purchase the tool and the remotes that I'll be using in this tutorial. I'll also be doing a screen recording and using a camera to give you a clear view of the process. I'll start by plugging the scan tool into the OBD2 port under the dash and then walk you through the steps of going through the system selection and transmitter code saving. I have to say, programming remotes for remote starts and alarms used to be a real nightmare for me, but with this tool it's so much easier. I've used this tool on other jobs as well and I've paid for it with just one job, it's definitely worth it. If you have any questions, please leave them in the comments below and check out the link in the description for more information about the tool and also check out my playlist of videos about the 2007-2010 Hyundai Elantra, you might find some valuable information there.
Elantra Playlist:
• Hyundai Elantra
Amazon Links:
Key Fobs:
amzn.to/405b5mQ
XTOOL D7:
amzn.to/3XF1JMW
Disclaimer for DC Auto Enhancement
We are doing our best to prepare the content of this site. However, DC Auto Enhancement cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DC Auto Enhancement shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DC Auto Enhancement. For these external sites, DC Auto Enhancement cannot be held liable for the availability of, or the content located on or through it. Our Privacy Policy was created by the Privacy Policy Generator. Plus, any losses or damages occurred from using these contents or the internet generally.
2007 Hyundai Elantra
2008 Hyundai Elantra
2009 Hyundai Elantra
2010 Hyundai Elantra

[@bhf4u]

do you know how to program them with out the tool? there used to be a video but i cant find it .

[@DCAutoEnhancement]

I looked but it appears that there has to be some type of programming tool. I am pretty sure you can do it with a much less expensive tool. amzn.to/3IoGNnp

[@DimasGroup]

Hi, how can I know the Hz of my remote? I lost both control. I will buy a new one to programming but I need the Hz that it works.

[@DCAutoEnhancement]

I would think if you buy the ones for your year make and model, you shouldn't have an issue as long as you have a programmer

[@proanswers]

Do you have to have 2 remotes ? I only have one, and its not the orginal, yet hyundai oem.

[@DCAutoEnhancement]

I bought two, yes.

[@proanswers]

@@DCAutoEnhancement seems that you should be able to program just one. I have a topdon Pheniox lite 2 scanner can't get code saving to reprogram remotes.vey similar to xtool

[@mohammedkhalid1648]

I recently made a new remote for my avante hd but the problem is after turning off the car there is a click sound that make the car respond to the remote but sometimes when i turn off the car the click sound does not happen so the car does not respond to the remot how to make sure that the click sound happen everytime i turn off the car?

[@DCAutoEnhancement]

This is the first time I programmed remotes to this kind of car. I ont have a lot of experience with it. Did you use a programmer if so, what kind was it?

[@xDJLAFx]

can you program a used remote from a different car?

[@DCAutoEnhancement]

I don't see why you couldn't

[@yorkieandi]

Just had a locksmith program a new spare remote for my 2007 Hyundai Elantra. Checked out the spare remote before I paid him, as it is working as intended. After he left, I attempted to use my original car remote, and found that it suddenly became disabled, as it was working fine an hour before he programmed my new spare remote. Anybody out there know why???

[@DCAutoEnhancement]

When programming the new one, it may have deleted all prior remotes. He could have programmed the new one and the old one at the same time to ensure they both worked. I'm guessing he was unaware that you still had one that worked

[@yorkieandi]

@@DCAutoEnhancement Thanks for the info.

[@husseindab]

Hi can the D7 unlock the keys ?

[@DCAutoEnhancement]

Do you mean can it program the keys for immobilizer?

[@husseindab]

@@DCAutoEnhancement is it possible to use a programmed key from another car and reset it to program it on another car ?

[@DCAutoEnhancement]

@@husseindab I don't think so just because of the part that is inserted into h ignition switch. But if you swap the whole ignition switch, you could program the new key to the car. My car doesn't have the immobilizer on it.

[@husseindab]

@@DCAutoEnhancement ok great how do you think about Xhorse VVDI Key Tool Max PRO

[@DCAutoEnhancement]

@@husseindab this one? amzn.to/3Y4LpET looks like a good unit especially if all you are going to be doing is keys and remotes and don't need to do any diagnostics.

[@perfectkeyshop]

Can you give me vise I am 2 years experience of locksmith

[@DCAutoEnhancement]

I'll do my best, what can I help you with.

[@maryjane9842]

@@DCAutoEnhancement you just did, he told me to inform you, thank you! HHO 😇

[@DCAutoEnhancement]

@@maryjane9842 what did I do?

[@annshoemaker1568]

Hey dude. You look like President Zelenski of UK, just saying

[@DCAutoEnhancement]

I wish I was as good at fundraising as he is! 🤣