Making Professional PCB at Home

In this video I tried to make a Professional Quality PCB at Home.
🔅Order your first PCB and get a $5 coupon - www.pcbway.com/
🔴 Get Altium free trial - www.altium.com/yt/ddelectrotech
❤️Subscribe My New Channel - kzbin.info/door/
C_mi5ZthQaKdkXQm2bnyRDA
❤️Support us on Patreon -
/ ddelectrotech
Similar Videos -
Made My Own Tablet Computer - • How I Made My Own Tabl...
Made My Own Smart watch - • How I Made my own Smar...
Made My Own Smart Glass - • How I Made my own Smar...
------- Follow us on FaceBook ------- / ddelectrotech
------ Follow us on Twitter ------ / ddelectrotech
#PCb#HowToMakePCBatHome#DIYPCB#GlitterbombTrapCatchesPhoneScammer#Glitterbomb

[@MikeSims70]

I have to say ... this is VERY impressive! Sure it didn't turn out professional quality, but you still managed to etch a PCB using laser print quality and LIGHT as opposed to the toner transfer method which is just awful in my opinion. Very nice job and excellent video!

[@SciHeartJourney]

I only build my own boards to test a prototype for low cost. I know I'm going to upgrade the board, so it's not worth having it made until I work out the bugs. But I just "tin" my boards, but I'm aware of the risk of short circuits. I think this silkscreening method is PERFECT for prototypes! Thank you for this video!

[@lpjunction]

For solder mask, a UV cure solder mask is simpler and faster. Screen print is for mass production. But if you need in quantity, just send out to the PCB factory.

[@kmaheshmahi4366]

Hi

[@SHLBEATz]

He again finally realised that he has a channel..🙏

[@elixpo]

Your aim is 10million subscribers now.... Upload a bit more regularly... I literally wait for u dada

[@kabyochatterjee4587]

Ekdom thik bro..

[@Rentaro_dev]

hmm

[@thedankfootballtricks]

Hmmm

[@mrduckical]

I think your a bit high

[@Anumakeupartist780]

@@mrduckical bruh look at T Series India there subscribers

[@pentachronic]

The issue is your exposure/shadow mask isn't opaque enough. Print it twice and stack them. This will make it impervious to light. I'd also use acetate and not paper+oil. Oil will lift the mask off the surface and you'll get light creep around the edges of a shadow mask.

[@larrybud]

can't you just print this on clear plastic?

[@dd884e5d8a]

That’s pretty good! Thanks for sharing your process. Especially the solder mask and silk screen.

[@Karan-Bansal]

At least he remembered that he has a youtube channel 😁😁

[@aptube6754]

STFU he is a hardworking guy

[@HoXDipannew]

True

[@kartavyapanchal2963]

Spammer!

[@raghavasrinandan8950]

Now a days he is remembering

[@GotaSir911]

Why does he forget it so much?

[@MrMinimum24]

Funfact :- After long time he knows that he has a youtube channel 😂

[@suchirbk5962]

No replies?! Lemme fix that

[@faizanalam2986]

He knows everything better then you will ever know😂😂😂😂😂

[@Genius_47]

?

[@fahadakhand6781]

He has lot sub than you😂😂

[@Destiny4CODERS]

​@@faizanalam2986ok

[@saiharsha36]

So much hardwork and dedication!! Hats off brother!!

[@jjfo1980]

Your right. But pcb manufacturers that has all the top machines and can turn out hundreds an hour for such a small cost like $2 this is truly a waste of time

[@ritzcreations7947]

The one and only Successful Engineer KZbinr 😳👍🏻

[@amaanoliyath4875]

Mark Rober??? Linus Tech Tips? Etc.?

[@jacobnavarro9538]

Hacksmith: Am I a joke to you?

[@sajidmohammad3190]

Don't forget ElectroBOOM

[@syedrayyan190]

let's say the Indian engineer channel, so far I have not found another Indian channel like this

[@amaanoliyath4875]

@@syedrayyan190 TECH BOY TOYS??? THE WRENCH???

[@pavelskripec7133]

Few tips: clean the PCB before use (after cut). Just soap is sufficient. If you want to faster the process, just use ~50°C watter for the acid. And sharpen pen is also good for repairs of broken traces.

[@AjiteshSeth]

can we just appreciate him for his kind of hardwork keep good work up!!

[@SherriMSDRML-qm1pe]

Thank you sir this is quite informative I'm 64 years of age a theoretical scientist and now I am on my next venture thank you so much this is quite informative.:-)

[@JKStudios101]

You Learn Something Now Everyday. 🧠😄

[@Abs0fFlab]

Brother this is amazing. So proud to see one of our own doing this kind of work and educating at the same time.

[@labscience8271]

Salute to this guy's patience. I would've quit first time it didn't work. Respect

[@lameskipslegday]

I like the fact that he never gives up

[@laicanterra3341]

dude the amount of work you are doing is hectic kudos to you

[@IshanSathe]

Very nicely made! This is truly inspiring! And.. totally felt like worth my time watching

[@FinanceRambling]

Great video. Love how you kept attempting to get it the best outcome and showing the issues that will arise. Surely learnt a lot.

[@dani1yell]

He's back again damn I needed my favorite youtuber to upload a video 😊

[@GarageFactorySD]

Do they both work? Its cool to see you make the pcb that way and kept trying until you got better results. I have been using a milling machine to mill out the traces on FR1 boards. Personally I think if you want to iterate on your design quicker, its a good to know how to make pcbs at home and so you can test out your design more conveniently. Of course there are tradeoffs between cost, complexity and time to consider

[@abdurrahim3135]

After a long time, I watched a quality video. Thanks, DD ElectroTEch You are appriciated.

[@venkatasubramanian6267]

Thank you for putting up such an honest video out there. It is an expert show with all the usual shortcomings that usually happen in the workshop. Make it more real and valuable.

[@Sebastian_992]

Great Video again man. Just love the channel😍

[@ihmmani1]

Awesome, informative and entertaining video. :D Could you make a detailed video about the screen printing? I'm looking for something I can use for aluminium case marking.

[@jocic_91]

It's definitely worth it in the long run IF you are using the toner transfer method and tinning traces. Cost per project is ~2$ for single and double layer boards, and you have it ready in

[@kp_kovilakam]

Learn from mistakes. He is one perfect example!👏

[@abhishekpatil5768]

Literally waiting for u sir!

[@jashan8599]

Legend is back 👍

[@ShowemRight]

Much respect to you sir for even wanting to attempt to do such a thing

[@AmazingStuff2019]

This video has explained us that everything on the world we need requires some sort of unrelated science branch (like using Chemistry here)

[@akashpramanik3489]

The person who give you best memories becomes a memory

[@suheelkhan6109]

Bro u have great talent and craz to do the things ... Your way of understanding and doing the things are very professional 👌 Best of luck and keep going...

[@vishwanathk5948]

Hello bro I was browsing through KZbin and a saw your videos . I'm a ECE graduate know many things but experimented very less your way of doing new R&D impressed me and motivated me to start thinking like this apart from my job I'm very excited ❤️. Thanks bro

[@PaulGeorgeedassery]

This is amazing, Congrats!

[@MartinMacGill]

Great effort! I'm with you in that I'd get it professionally made if it's that easy to obtain quickly

[@Alanhallow]

You know what a coincidence means I've been strolling through you channel now Started watching a video about the same time you made this video public Looked the videos of your channel it wasn't updated But got the notification And i became the 1st to view this video

[@abgrafix]

The amount of patience you have is realy commendable brother .. Good job

[@priti3827]

DD electro tech in 2030- "hey guys today we are making a diy satelite"

[@electrohardik8497]

Again, let's go for 3 months 😏

[@GotaSir911]

I wonder what he is making

[@Anuraggoyal4]

3 months passed

[@GotaSir911]

Lazier than before

[@i_love_ar_4789_my_husband]

finally. welcome back

[@drewseefeldt7908]

That is a work of art. Thanks for sharing!

[@indromitarelaxingvideo6056]

Hats off to your patience and dedication

[@realfakibazz9737]

Awesome 👍😊👌 bro keep it up and love from BANGLADESH 🇧🇩🇧🇩🇧🇩🇧🇩

[@samarpitahuja6125]

Electronic legend is back 🔥🔥⚡⚡

[@dammdaniel9953]

Thank you bro learnt a lot of new things form your video i have worked in a lot of electronics projects as well . You have managed to impress me by your hardwork and efforts

[@kanp5114]

Great video mate, amazing to know the process and capability to do this at home !!

[@iuhere]

you forgot to mention the shipping charges as usual just like any other youtuber. No one mentions the actual cost of getting the pcbs ,I suppose because they sponsor the video. Anyways was worth giving a shot type video, nice one.

[@Dragon-xd9em]

Because every country has different shipping costs

[@iuhere]

@@Dragon-xd9em doesn't matter, you cannot list all as a creator unless you dig for all the info practically the norms change every now and then as per government intimations but here you are sharing your experience not the world's that is what is missing , not just in this video but almost all creators. Very few are left who share all data for complete transparency which is nowadays taken for granted while making videos. This results in more clutter on youtube as well as if practiced will reduce the same(clutter) and bring you content of a better quality. I do respect these creators but then feel sorry for others whose video production quality is nice but sponsored content is not handled well especially when you are looking for long term relationship with your viewers. Hope that solves all/any immediate queries about the context of my original comment. Objective was to compliment content while being honest about missing parts. But then who cares, 😂 in this whole youtube I am just another viewer writing stories in comments who nobody might pay attention to. Nevermind. Have a good day ahead! 👍

[@RAndrewNeal]

Good video. But I don't think your mesh count is fine enough. For those fine details required for a PCB, you'd want a mesh count closer to 300. Also, you can print the mask for the traces with the screen as well; no need for that photosensitive stuff.

[@user-qn1oh6kl9s]

You made that look pretty easy! I can barely solder/de solder pcbs. I'm still learning about all the devices that are used. Capacitors, resistors, inductors, transformers, diodes, bridge rectifiers and don't even get me started on Ics! Which are basically super small circuits completely integrated onto a microchip. I've been reading up on transistors,thyristors,mosfet,jfet ECT. Electrical engineering is fascinating but at the same time extremely Humbling! I'm an electrician and it's still rather difficult to understand everything. Great video.

[@lts_Sam]

He is real hardworking man Salute for you 😁

[@cranerclassiccars892]

Hey brilliant vid, really great, learnt a lot, can't wait to build one. You were a bit harsh in the comparison. Look forward to seeing one you make reeeeallly carefully...

[@willmorrison1022]

Don't waste your time. At this point, making aboard is more an exercise in just doing it, not anything practical. Get the Chinese to do your boards. They do a GREAT job and charge far less than your time is worth. Trust me, I've done up boards for DECADES and can't stand the idea of doing up another one. There are far better ways to spend your time than doing that.

[@doctorpanigrahi9975]

@@willmorrison1022 :(

[@osa1121-]

He finally has his password back!! Lol

[@vsreddy4520]

Only some understood your comment Lol

[@osa1121-]

@@vsreddy4520 i subbed to u

[@osa1121-]

@@vsreddy4520 umm Hello vasu reddy As u know golmaal mai In the comment I meant that he had forgotten about his password of his Google account And now he uploaded cuz he remembered his password

[@viankhan7969]

Bro we all love u. U r the best tech youtuber ever. Pls never leave the utube.

[@sgiridharan6171]

Awesome da, though you give a long gap for each video but your videos are perfect !!!!!!!!😍😍😍👍👍👍

[@monemrahman5866]

বাংলা চ্যানেল এর কথা ভুলে গেলেন নাকি? বাংলায় আরও নতুন ভিডিও চাই। Love from Bangladesh.

[@elixpo]

Yes! Excatly.. he is not uploading there because that channel did not reach 50K subs

[@onetechoneburner2157]

First comment love you sir from Himachal Pradesh. India

[@user-ace96plays]

I'm amazed seeing your patient...

[@gumnahs]

Wow !! Awesome 👍

[@harshsenghani55]

Sir plz Upload video Every Day..

[@pvcuber1232]

Made programming videos also if you know

[@saraazar223]

Excellent video. Legendary effort. Thanks for the video👍

[@akshaypatole4929]

I really appreciate all your efforts... Nice video

[@vivekvarma6863]

Hello Sir, Vivek here I have also interest in technology and I am doing JEE preparing for computer Science. But sir I have to become like you, so sir which think I have to do? please sir can you tell me 🙏

[@theconfusedhamster]

Legends watching In 2023

[@Upbeat_Impact]

Man , you never give up. That D Scientist In You ! Hats Off ! World needs more Geniuses like U Bro !

[@silverismoney]

I thought that was a really great PCB. All the at-home methods including some of the $4,000 conductive ink PCB mill/printers produce something along the same quality. Great for testing a design before manufacture I guess. Nice video, good work.

[@akshayyadav5914]

Are you iitian?

[@SUPRAJITMUSIC666]

I think

[@Deadwindshadow]

awesome, love your content! make more1!!!!

[@jobaptist]

informative and honest with no bs..

[@delrstudio.2252]

I wish you all the very best... This is a very important lesson.

[@kenrock2]

I guess the person who asked this question they just go off order direct from PCBWay instead after watching this video process.... lolz but i have to say that this guy is a legend to built a PCB manually with everything at home This is very educational for people who are really curious how PCB are made

[@mehdiardavan]

Excellent video. Thanks a lot. I learned a lot.

[@leaf_blueleaf]

thank you for putting this on youtube!!

[@rafaelasuncion6076]

Thank you so much sir for your talent... It is so enjoyable to watch your content. I am from the Philippines.

[@Antebios]

Wow! I learned so much!

[@devanshdave416]

Hats off to your hardwork for such an informative video!!

[@jaysondibbyo8744]

Love from Bangladesh.🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩

[@tanjir7116]

Amy daki oll day

[@jaychavan4710]

You make lot of efforts for a single video 👏👏👏

[@subhabrataray4786]

Damn bro! That's lot of work. Thanks for making it.

[@abhaygoswami5652]

Love the way he talks!!

[@himanshuhero]

When The World Needed Him The Most He Appeared!!!!

[@andrejwalilko634]

thanks for this video, you convinced me to just go with the pcb manufacturer XD

[@CombatCrayfish]

Great job!

[@donaldktrump8942]

itna information wala content youtube par hai hats off man

[@outcastzeroone]

a suggestion, you can use a 50/50 mix of Vinegar and Hydrogen Peroxide with a small amount of salt to etch boards. It stays clear, works just as good as Ferric Chloride, and makes it far easier to monitor the board during the etching process.

[@jkadofo]

Excellent. Much respect 👏🏾👏🏾

[@anirudhyabatabyal9949]

Amazing !

[@codefrite]

BRAVO. Thank you for sharing !

[@qdaniele97]

With a small CNC you can skip all the manual steps except applying the mask resin (and that too becomes easier as you've just to apply an even layer, a second pass in the cnc will remove the excess resin above the pads).

[@SamTech007]

Thank you, very informative video

[@vivekvarma6863]

Wow sir great work and knowledge👍

[@whistleimpossible7036]

I would tell my children that their was a legend who was PCBway himself

[@dattatreyaambetkar7252]

Thanks for demonstrating the pcb making procedure ( latest) . tks sir.

[@dinakarjanga6710]

Persistent pays off......good job

[@BryanDenham]

nice work thats awesome

[@vijayvenkatesh9583]

You are inspiring 👏🏻👏🏻👏🏻

[@herbie_flair]

Lotta work!. Ordering one is better than making one. The instruments for making will take more time to delivary.

[@bitcat3909]

We all know that. We just want to know if it is possible 😀

[@hmx_mrx]

It look so satisfying 😍😍🥰🔥