De-Pinning, Re-Pinning, & Crimping Common Toyota Connectors (Featuring A70 Supra Coil Pack and CPS!)

In this video, I show you how I replaced the damaged connector housings on my CPS and Coil Pack harness!
Tools I used for this job:
Pick tools: amzn.to/3GVTPaE
Wire depinning tools: amzn.to/3XlLyDT
Wire strippers: amzn.to/3HhhOT5 (these are the ones I used i this video, but I also have these, and love them too: amzn.to/3HgdJyr
Crimper tool: amzn.to/3Hel55I
Side cutters: amzn.to/3QUtKO4
Parts:
Connector: www.driftmotio...
Terminals: www.driftmotio...
Complete Repair Wire: www.driftmotio...
This is the digital CPS I am using: www.driftmotio...
Complete Mk3 Supra EWD: www.cygnusx1.ne...
To check out my complete list of Tools, Shop Supplies, and Parts recommendations: www.amazon.com...
Equipment I use for filming:
Phone: amzn.to/3xUkvFd
Camera: amzn.to/3EAuhyp
Tripod: amzn.to/3EBYtJr
Drone: amzn.to/38DgR8P
www.pistonsandpixiedust.com
IG: @pistonsandpixiedust
FB: @pistonsandpixiedust
TikTok: @FayeHadleyOfficial
Twitter: @SupraFaye

[@MrMadaket78]

Not only a great mechanic/technician, Faye has the most enjoyable voice, manner of speech to listen to. Lot of fun and informative videos. Thank you Faye.

[@bobbq9290]

Not only that but Beautiful also.

[@FayeHadley]

THANK YOU!!!!!! :'))

[@jozsefizsak]

That was marvelous, I have to say. Do I have a crimping fetish? I have no idea but I really like doing things properly for the simple reason that I just want it to work and keep working. I'll be depinning a miserable little connector that has been intermittent from the beginning so this has been a nice, empowering nudge. Thank you!

[@FayeHadley]

Oh, so awesome!!!

[@cristodyslexium]

Brilliant timing, I have be doing some crimping for a uhf radio base station project and wanted some tips to help get my crimps perfect.

[@LunarOutlawsGarage]

Great video! This will be a killer mk3 when it is done. Keep up the awesome work

[@projectmustardseed857]

I really enjoy your videos because they are a pleasure to watch , ( professional, in both camera angles and editing) . You make such complex projects appear so simple. Thank you for sharing. You are a inspiration aspiring mechanics.

[@FayeHadley]

That means SO MUCH to me🙏🏻🥲 thank you thank you!!!!!!!

[@johnmbell4642]

Hey Faye, all the luck all the time! you always do a great job of Breaking down the task at hand , filming it so that you can easily see how it’s done and trust me I am literally amazing how many channels don’t do that. If you just did that your channel would be Miles ahead, but combine that with you’re a great choice of topics and your incredible personality, well, what more can I say 🙂🐔🐔🐔👍

[@FayeHadley]

🥲🙏🏻 thank you so so so much!!!!!!

[@JeremyKonzJames]

I've always wanted to know how to do this. I am going to be redoing the wiring harness on my 1985 F350 and I'll need to crimp all the ends. Thank you for this video.

[@FayeHadley]

Oh, awesome!!

[@bobmiller7426]

As always, you have pressed me into being a better person. Now I need to check all my connections on my 2003 Honda, just in case. Thanks. This is the best explanation I’ve seen on this type of project.

[@FayeHadley]

Oh my gosh, thank you so much!! I am so happy to help, that means so much to me!!!!!!!

[@RobertRixham]

As always, I enjoy and learn something new/different with each episode. On another non-related issue, I love the glasses.

[@FayeHadley]

Thank you so much!! I have been wearing them more lately since I re-discovered them from my closet! They are from college - 2006! Who knew seeing well was so awesome?!!

[@malikdigger4544]

Awesome Faye this will be helpful for any Toyota enthusiast.

[@FayeHadley]

I hope so!

[@HOTRODRICO]

@@FayeHadley helped with my gs300 but to be honest I ruined my cam position solenoid connector... hopefully next time I can get it right... one thing I added to the mix is after I crimped the metal connector on I added a dab of solder to the crimp to lock the wires to the metal crimped connector and that thing was SOLID... I would like to also add to those watching the video that this crimper is NOT your standard crimper it's a DOUBLE CRIMP TOOL.... peace

[@rabbibacongrease88]

I bought an awesome ratcheting crimp tool specifically for doing this sort of thing and building custom wiring harnesses and it makes professional crimps

[@drwisniewski]

Thanks for the instructions. I always struggle to know what type of pins or pin styles to get. They don’t seem to be universal.

[@FayeHadley]

They ABSOLUTELY ARE NOT universal!! I had a friend who does mostly American muscle cars try to de-pin one of my connectors and he couldn't get it !! Don't feel bad! What I recommend is going to a salvage yard and snipping off a bunch of connectors for the types of vehicles that you're interested in learning about and just practicing on junk connectors! That's what I did, and it really helped so that when the time came to do mine I didn't break anything!

[@tjwhite6705]

Super informative and great video. Well done

[@FayeHadley]

Glad you liked it!😀

[@carloquinn5233]

Wow, I just did this on a VW 10 pin connector. I could not de-pin it with the de-pin keys kit, so I ended up cafrefullllllyyyyy removing each pin using a speed variable Dremel to cut the housing off. Took a very long time but got it done. Once off, I just pushed them back into the new 10 pin housing. Thanks for the video Faye.🙉🙊

[@FayeHadley]

Oh my gosh, that sounds like so much work!!!!

[@icanfartloud]

A female mechanic not obsessed with perfect nail polish. She works hard for the sake of it, not for the tube glamour. Kudos Faye

[@FayeHadley]

HAHA your username!! And thank you :))

[@bobbq9290]

I was looking at that to and I Love it.

[@regularguy8592]

hey the really hot chicks like her don't have to worry about nail polish and such😉

[@Jason-ms4gb]

Allied Wire & Cable is an excellent source to find replacement wire.

[@AustinKamuela]

Somehow someway in the near future this video is going to help me tremendously when im rebuilding my 7MGTE so, thank you in advanced Faye!

[@FayeHadley]

Heck yes!!!!!!

[@baggins1]

I need all that stuff. I miss Fry's Electronics

[@baggins1]

@@klwthe3rd that'd be great. I do have an electronics supply (old school) about 40 miles away. Just recently recognized need for pin tools and such.

[@JimmyMakingitwork]

Nice work Faye! Have you seen the kits with changeable inserts for different wire sizes? Pretty neat, ratcheting for a perfect squeeze every time. Also work on small or larger wires.

[@bestgirlsdad]

Thank you Faye. Your videos are always so pleasant and helpful. I need to replace the connector for the low beam headlight on my daughter's 2005 Camry XLE and couldn't figure out how to de-pin the wires. Your explanation is just perfect. Wishing you a blessed day.

[@billyhorton5779]

Great video, very useful information Faye!

[@FayeHadley]

Glad it was helpful!

[@seanhohlt1017]

Need more power out of my 14 Corolla. What are the best internal mods or anything else you can recommend?

[@yanikstaley7405]

I am very impressed!!!, dang it, I have been red necking wires all these years with needle nose plyers, paper clips, ground down picks, and screwdrivers. If I had known, there was an easier way I wouldn't have dreaded doing wiring. Thanks for the insight. I'm going to go get me some new tools.

[@FayeHadley]

Heck yes!!!!🙏🏻

[@GiletheCarGuy]

I knew this would be informative and helpful. Now those vintage Toyota connectors on the MKIII Supra aren't so "foreign" looking ;)~

[@gjgp225]

There's a tool for that !!!

[@desolatemetro]

Nice. I stepped up my 12v wiring game to redo the lights on my FJ. Got all the supplies to make and depin connectors, the proper TXL wire (in multiple fancy colors!) for wiring the switch plate, etc. I love this stuff. Being able to make your own connectors is so nice. For wire protection, I like the braided wire wrap which you secure at both ends with adhesive lined heat shrink. It does a good job and looks really professional. I saw your post about the store in San Antonio on insta so I know you've seen all this stuff but I'm just geeking out! 😁. I live in NH and might actually make a pilgrimage to that place the next time I'm in TX for work. Nowhere like that around me so I have to order everything.

[@theylied1776]

Before I was exclusively a Toyota guy, I had a 2007 Frontier. I had an engine fire and Nissan quoted me $1,500 to rewire the entire engine bay. The wiring harness alone was $950. I'm a special kinda stupid, so I decided to do it myself. I was really lucky because I found a local salvage yard with a wrecked Frontier with the wiring harness that I needed. It took me almost Two Days to install the harness and Two more Days of rechecking every wire, its connection, and pin. I had that Truck for another 200k miles with no electrical problems.

[@nigelbarton8350]

Excellent video, also all good tip on buying a second harness to get correct colours etc. I did this when I redid the entire loom on m 1972 MGB GT bare shell rebuild, great or adding extras like hazards and fog lights. Mind you I bet your engine has more wires than my whole car 😳

[@klwthe3rd]

The one thing i can say about Faye and this channel is that she doesn't scrimp on showing you ACTUALLY how to perform a procedure. I'm soooo tired of watching channels where it goes from broken to new in 1 sec without showing the actual process. You can't LEARN if you don't see each individual step. We're not mind readers. lol

[@FayeHadley]

Thank you so much, Kenneth! That is absolutely my goal. I want to make videos for the "past me" to learn from the "future me" - filling the void on what I wanted to be able to learn easily from the internet. Your comment validates me so much, thank you!!!

[@klwthe3rd]

@@FayeHadley You taking time to reply to my comment validates me as a valued subscriber. Creators are so worried about their videos becoming "boring" 😫 if they show each step. I say that's insane because if we can't learn from the edited (watered down) content, the whole video is a waste. So honestly you are in the 1% of KZbin creators doing it right. Plus you're super sexy too. 😘

[@725josie]

You and Dave (from Haltech) are my new favorite people on KZbin, such quality content! Love the technical explanations and why's behind the do's or don'ts. Fixed a wiring harness for my car with this vid, and got some neat tips and tricks along the way. Thank you!

[@michaelrobertson8795]

I've been wanting to get me a set of those pin extractor tools to remove the pins out of the connector. Great video,!!!

[@FayeHadley]

I have bought a few different types, and honestly, the pointy pick tool (sometimes I shave it down more to make it even pointier) and those little keys from Amazon are ALL YOU NEED. Less than $10 for both.

[@crnutsmotorsports]

I just finish doing a Molex connector project and it kicked my butt. There were no good You Tube videos about those pin type.thank you for the education. Next time Ill be able to do a better job in 1/2 the time.

[@FayeHadley]

:')) thank you so much, that means so much to me!!!

[@bobbq9290]

Queen of Pixies

[@davepelfrey3958]

Excellent tutorial on the wiring. I need to replace some bad connectors on my1997 C1500. The Hadley girls look healthy. I hope they are laying eggs, with how expensive they are now. Peace and Love.

[@FayeHadley]

They finally started laying again after they ALLLL MOLTED at the same time and lost their mojos HAHA! I have been giving eggs to friends and family!! We get about 10/day now again!!

[@akmcosdc]

new video is a nice end to a Thursday night graveyard shift :^)

[@FayeHadley]

Whoa! Graveyard, that's hardcore!!!!!

[@akmcosdc]

@@FayeHadley done it for 25 years!

[@msbeauford1]

Faye, Thank you so much for an excellent tutorial. I used it to repin my 2005 Land Cruiser Knock Sensor connectors. You are awesome!

[@FayeHadley]

Glad it was helpful! That makes my day!

[@yunggai]

If you need new wires like the CYP CFK with a shield cable, Prowire USA have them listed per Gauge/wire wound cut to length. I think they sell them in Tefzel.

[@FayeHadley]

So awesome-- Thank you for the tip!!!

[@rickproulx6667]

Working on a 4age engine something I deal with when replacing a new one.

[@dannyboystudios6604]

Great video Faye! I’ve repaired quite a few wiring harnesses over the years. Same issues you showed here. I made my own de-pinning tools from timing belt tensioner pins. They are made with strong steel and less prone to bending. Just had to grind them to shape. Now if I can stop loosing them….🤣

[@FayeHadley]

That's so awesome!!! Do you sell them??

[@gearheadgregwi]

Instrumentation nerd here. A topic near and dear to my heart. (We wake up screaming MOLEX in the middle of the night😅😅) Super-duper important on the marine stuff I work on!!

[@FayeHadley]

BAAHAHAHAA !!

[@gregslair4278]

You crack me up. You take the most light hearted approach to automotive mechanics I've ever seen.

[@_1fine99jeepgrandcherokeewj]

I wouldn’t have been able to figure it out if it wasn’t for you! Keep inspiring❤️

[@FayeHadley]

Thank you so much!! SO glad it helped!!!!

[@ranger178]

wow a faye video haven't seen one in a while.

[@FayeHadley]

And I've put out 3 "shorts" too since my last video!🙏🏻

[@johnhorun2530]

Fortunately, I live in an area of the country that's kind to wiring, but bad when it comes to rust. I think I'd rather deal with bad wiring...

[@FayeHadley]

Me too! (the rather deal with wiring part)

[@ronaldkirby9299]

Enjoyed video this something I've wanted to learn. Thank you!

[@FayeHadley]

Sooo glad it was helpful!

[@brandendyer4638]

Miss hanging with you Faye.. se Portland FES days with Jerry

[@FayeHadley]

Oh my gosh, Branden I was just thinking about you the other day when I was sanding my Supra all day alone in the shop, doors closed, listening to old music... reminded me "I miss my Supravisor!" HAHAHA hope you're well :))

[@jorgerea939]

You are so awesome, love your background music, and I got to add that tool to my bag of tools. I had always wonder if those had the option of being repaired, now I know that they can be fixed. You are so awesome and funny, 🤩

[@FayeHadley]

Glad it was inspiring to ya haha!! Thanks for the kind words :))

[@dnlmachine4287]

Read "The Hadley Hens" at the end, thought it was the music maker. But then there were actual hens, and the hens were good. There was music, and the music was good. So I rewatched the video numerous times, and the video was good. Stay gold.

[@bradjohnson6919]

The Factory Toyota service manual almost always shows the connector and the factory part number. If you find a broken connector but don't know what it goes to, they even have a page of connector pictures so you can match it up. Toyota has the best service manuals out of all the manufacturers.

[@FayeHadley]

I agree!

[@robertfarris7375]

Love your work Faye!! That engine is looking awesome.

[@FayeHadley]

Thank you@@@

[@zenzeypher]

Got it, thank you. Only channel that covers this connector.

[@FayeHadley]

Glad I could help!!😀

[@MrDanielSoliz]

Awesome as usual!!!!👍👍👍👍🙌🙌🙌

[@FayeHadley]

Thank you Danny!!! You're so awesome!!

[@fredswanson156]

Your smile makes everyone 😊 great video. Thanks for your time.

[@FayeHadley]

AWWW haha!! My pleasure 😊

[@scottfreeman3748]

Great explanation of wiring how long have you been wearing glasses 🕶️ looks good

[@FayeHadley]

I have had these same glasses since 2006 HAHAHA!!!

[@williamwatson8496]

So if your negative terminal on the battery has a ground wire attached to it, do you still attach your cable to the negative terminal or do you attach it to bare metal in the engine compartment? My instructions on mine were unclear. Thank you in advance.

[@FayeHadley]

Bare metal in the engine compartment is always the best option!!!

[@atticstattic]

Neat, I feel I've really made a connection with you, itsFaye!

[@FayeHadley]

:)) haha!!!

[@roknrolbilly]

FAYE!!! always nice to wach you work.. your the greatest!

[@FayeHadley]

Thank you! 😃

[@GuysWithRides1]

Excellent video, Faye! It was my first time ever pinning electrical connections and your video was an excellent resource when I replaced all of the Bosch fuel injector connectors in my 1985 Porsche 928S Barn Find.

[@danielsmith-ze3wy]

Thanks for the video

[@FayeHadley]

No problem! Thanks for watching!!!

[@borgsimpson935]

Awesome tutorial, thanks for the tool crimper suggestion.

[@FayeHadley]

No problem 👍

[@borgsimpson935]

@@FayeHadley Miss Faye, haven't seen your tutorials in a while. Always awesome. Stay Gold, keep striving. Kudos....

[@bigsarge2085]

✌️

[@recklessdrivinginsingapore]

Stumbled upon your channel - very clean and straightforward presentation. I saw, I came, I subscribed.

[@cgonedfishing]

Love Love Love this! And so much Love in your work! Enjoy the weekend!

[@FayeHadley]

Thank you so much!

[@NBNracing]

I come from an aerospace wiring background, I’m impressed with the quality of the crimps from your tool. Now for the mansplaning portion of the comment, if you can stagger the splices on the other side of your plug it will make the harness close down a little nicer. Keep up the hard work. My wife and I love all the different projects your are into.

[@bigdredre3725]

She did stagger her splices on the coil connection

[@revolutionzerox]

Aha I needed this. Got a tweaked harness made and my cps wiring is of course hammered. Didn't want a driftmotion pigtail. What I want to do is rebuild the guts of it to. It's been rumored back in the forum days about getting a dizzy from the same period and pulling the guts to rebuild the cps. I need to hang out at my parts store to confirm. But!! Thank you so much for the PNs!!

[@revolutionzerox]

Hold up... am I that dense I haven't seen this connector on DM... eh blonde moments. Been a long week

[@FayeHadley]

No, I totally understand! Honestly, I had to call them to verify, sometimes their website is hard to navigate!! So glad this was helpful to you!!!!

[@shirmworm]

Thanks - well done!!!

[@jesusgarciajr.182]

Oh my God! I love Intertex. I go there all the time when I need anything for my wiring jobs I do on classic cars and hot rods. Your absolutely right. Anyone who loves to do wiring will love that store.

[@FayeHadley]

HAHA hey Jesus!! We missed you in the LIvestream on Friday! And it is SO FREAKING AWESOME! That was my first time going and it blew my mind!

[@jesusgarciajr.182]

@@FayeHadley I missed y’all I know. Been a crazy last few months for me, but I’ll try to do better and join in next time.

[@frederickdominguez4829]

Nice. Im building a motorcycle harness. Do they make small profile connectors and where could i get them. Thanks, i love chickens

[@wademiyataki9221]

If things are in good shape and you just need to remove oxidation, there’s a product called DeoxIT. Cleans and helps protect the connectors.

[@peterskowronski6248]

Great video, thanks. I have been having a major squirrel attaches on my Toyotas, Camry and 4Runner. Right now, my MAF sensor cable has been chewed in half down behind the engine, going to be a pain to get to, but that will just be a splice. My 4-runner has 3 or 4 weirs chewed off right at a 15 pin connector on my transmission, leaving me will virtually no room to access the connector. Toyota tells me they never de-pin and replace just the bad ones. But I figured there must be a way. Have any recommendations? :-)

[@tonyg-2jz82]

My mind is blown 🤯 @ around the 1120 mark I've never known/understood what that part of the crimp tool was for and how to properly crimp those stupid female connectors used on all Toyota/Scion/Lexus cars! The soothing music and cute/likeable nerdy car chick is the way to go! P.s. I've broken so so many poor connectors and incorrectly sloppily crimped those things for the past 6-8 months! I look forward to redoing these now

[@TLCHobbies]

Came across this trying to figure out how to depin the 3-pin circular alternator pigtail of the harness (female). But this is still relevant info for depinning my other connector like the IAC valve connector on my 2JZ-GE. Where did you get the red rubber seals from?

[@thevandivers]

Good Stuff! :)

[@FayeHadley]

Thanks!

[@boris9331]

Nice video, love it. One thing I have noticed when cars get of age, some connector terminals get loose mainly the female ones where they don't make good contact with male onces. I remember on my 1JZ-GTE Soarer when taking a hard right U-turn the car would stall. I wiggled a few connectors, finding the TPS sensor connector seemed to have bad contact. I used a sharpened piece of metal to a fine point to bend the female terminals inwards so they hugged the male terminal better, after this no problems. Wiggle test can reveal a lot.

[@rippingandflippingcards4135]

I depinned the connector. Question is, the metal pin is 21mm long and has a opening on one side. Everything I saw on amazon is roughly 11-15mm long and not all have the opening. How do i source the correct metal pin?

[@rolandsmith2141]

Mad as a box of frogs......excellent information with entertainment just how i like my tech. Definitely subscribing because of the nail varnish 😂

[@westdetailworks366]

Good video , love you Faye

[@viewer2325]

loved your presentation. I need helpful suggestions to disconnect the taillight male and female wire harness on a 2000 Toyota Tundra. I cannot find any information about it. I can't tell how it's put together. Do you have any suggestion? LOVE your look girlfriend.

[@maralynthomson4375]

7.00min in is when the yaking stops and the depinning begins

[@FayeHadley]

Thank you!!

[@garyvanremortel5218]

Contact is the term regardless of gender. Male and female contacts are pin and socket respectively. Plug or receptacle refers to the type of insulator/housing/shell (plug usually the more movable, receptacle more fixed).

[@ceecee4823]

Hi Faye, can't believe this the first time I've came across your video. I'm also a mechanic. Though I only work on mine and my family's cars. And I have a small flock of chickens too. Good job with the video!

[@HOTRODRICO]

helped with my gs300 but to be honest I ruined my cam position solenoid connector... hopefully next time I can get it right... one thing I added to the mix is after I crimped the metal connector on I added a dab of solder to the crimp to lock the wires to the metal crimped connector and that thing was SOLID... I would like to also add to those watching the video that this crimper is NOT your standard crimper it's a DOUBLE CRIMP TOOL.... peace.

[@nickd920]

I thought De-Pinning, Re-Pinning, & Crimping was a private thing in your home?? Sorry, I couldn't resist.

[@dreednlb]

I bought the "correct" tools for de-pinning and I've still tore up several connectors and not freed a pin yet. 😭 🤦‍♂ You make it look so easy but my damn pin tool bends before the plastic clip will move.

[@ronniebenoit4081]

FYI.... copper and brass wiring will weaken and lose conductivity... you definitely need to learn some diesel diagnostic

[@ericx7476]

I had trouble finding these type of videos these whole past 2 weeks, now that I’m done crimping & repairing suddenly these types of videos are all over my KZbin homepage 😂 😑

[@scooterprint]

Great video! I’m gearing up to tackle a flying lead type harness on my 2JZ swapped Tacoma. I was going to reuse a lot of the connectors from the factory harness but after a closer inspection I realized it was in rough shape with a lot of missing insulation and brittle connectors. I found Ballenger Motorsports online that sells connector kits, but no information on what kind of crimper was needed to crimp them. Glad I found this video though! Definitely going to pick up one of those crimpers you used!

[@jamesfrazier3293]

Love ya videos Faye. You are a cutie. I mean no disrespect.....have you ever considered joining a platform where you could do the same vids, but maybe naughtier. I'd pay 4 it. I still love what ya do. Just a thought. You're great!!

[@SanJo408..]

Ur the best !!! This just happen to my b16 v tech solenoid the wire just broke cleanly off hopefully Honda still carry’s the housing n lil metal pieces

[@dougmead7669]

I have a 2005 Toyota Tacoma. I've been chasing a ground on my Tracker boat trailer side lights, and suspect it's in the cannon plug, truck side. How do I remove the wires from inside the plug, to inspect? It's the 7 pin cannon plug. I've seen other videos where you remove two set screws and push the wires out through the front of the plug, but this cannon plug doesn't have the set screws. Do you have a video on this? or can help me out?? Thanks again, and love your videos!

[@RastaJediX]

Wow perfect timing I found this video, because I need to rebuild the passenger door speaker on my '15 Corolla. I used Toyota battery terminal cleaner and a small pick to clean out the connector, but I'm gonna have to get some new wire because the old was so corroded I had to cut it back significantly. Is a common problem with this car. But screw paying $201 with employee discount for a full harness!

[@mattodom6367]

I bought my first supra when I was 15 it was a MK two and it was my favorite car I’ve ever owned. I love that thing I had a lot of issues with electrical connectors that would just blow off when I was driving there was this old dude who live right down the road from me Who was a Toyota 4 x 4 expert and he was really good at it he had a huge bit of property that he lived on that was basically like a well organized junkyard. Most of his storage was old school buses filled with amazing parts, and slightly organized more than you would think by seeing the property, I had a few problems with my Supras and he could drive me in his giant truck that had 44 tires on it to a spot where he had parts and he gave them all to me for free I eat I always came up asking to purchase and he’s like just keep itdon’t worry

[@ronniebenoit4081]

FYI.... copper and brass wiring will weaken and lose conductivity... you definitely need to learn some diesel diagnostic. Not insulting you at all 😎

[@regularguy8592]

thank you so much! I have a 93 Toyota 4x4 pickup I'm installing new souped up motor in and so many of the connectors are falling apart and need to be replaced this was very helpful

[@Mark_Linford]

Now our Faye is an Auto Electrician 😁

[@FayeHadley]

😅😅😅

[@SWAYLAB]

Thank you, Faye! This was really helpful as I’m attempting to rewire some connectors this week 😅

[@deano.8699]

Excellent DIY!! Awesome Job!!

[@FayeHadley]

Thank you! 😊

[@kcmurphy7367]

Great info. If anyone is searching & wondering - the tiny clips discussed at 6:20 or so is the same style as inside the air temp sensors on a 5th Gen Camry.

[@richardzenzola652]

Great videos. Always wait for the next one

[@FayeHadley]

More to come! Thank you :))

[@regularguy8592]

ok did my first connector today on 93 toyota4x4 pickup, it was a 3 wire plug going to the alternator, Had to stand on my head up under front end so that made it a good bit harder but all turned out well. I bought crimps and the little rubber insulators from your posted link and pliers from one of your other links, never would have gotten it done without you Faye! 😍😉