Deauther Oled Display DIY

[@Roelox]

Also check WiFi Duck DIY kzbin.info/www/bejne/j2bGoKOIasmhZpo

[@HUNTERJUSTFISHING]

Help where can i find the preference link? Please help

[@Roelox]

@@HUNTERJUSTFISHING Sorry, I am only just reading this now. It is in the description of the video.

[@tinkomusic604]

little fs lib missing not on google plzzz help m

[@Roelox]

Could you describe the error/situation in more details?

[@hrpjdw8981]

Dude, I never comment videos, but you're a f4ck1ng legend, I searched all over the internet for a solution to the problem, my buttons weren't working, and only your video helped, thank you so much.

[@mind-square]

Who would've know that you need to visit website to turn Display on, thank you for showing this!

[@Roelox]

No problem :)

[@MAMUCAhaipotio]

Ami no me lleva plis sos 🆘 pasa link 😢

[@emilka9537]

You are my hero, I couldn’t figure out why the buttons weren’t working for 2 weeks.

[@Roelox]

Thank you!

[@fishmage5828]

Out of all tutorials, yours worked for me. Thank you!!!!!

[@Roelox]

Good to hear! No problem :)

[@alandawi]

Thank you for such a clear explanation. It helped me a lot to develop my first project without so much frustration!

[@Roelox]

No problem man :)

[@rodolfovazquez-t1k]

Este canal deberia tener mas apoyo!

[@Roelox]

Gracias!

[@AmarMohanty]

This helped me with that button issue bro thank you so much for this, I was compiling it for the normal esp8266 board library, With the Deauther board manager it was done along with the define button commands.

[@miadikim]

Thank you very much This video is the most credible I've seen today

[@Roelox]

Thank you :)

[@tonkofonko]

Perfect video bro. Working for me and its total good. Thx man

[@Roelox]

Thnx!

[@nynxo4505]

this has helped me so much!! thanks dude

[@beyond.everything]

Awesome broo , i have the button problem in this , u solve the problem thanks a lot

[@Roelox]

No problem :)

[@beaststreamer4832]

When i search "default" not found default word... What i do now? 4:29

[@Roelox]

Are you searching in the A_config.h file?

[@hackerbodia6508]

Bro deserves more

[@Roelox]

Thnx!

[@itzuleanu]

youre a legend brother thanks a lot

[@Roelox]

No problem brother!

[@HUNTERJUSTFISHING]

Thank you so much it finally works

[@Roelox]

No problem :)

[@almazcarpets]

Great 👍 worked for me perfectly

[@hareeshd5206]

Hi dude one help

[@hakerfreldisffee1817]

No me aparece la libreria deauther, como resuelvo

[@braedenwhitehurst8073]

Got mine connected and everything.. nothing pops up on the .96 inch screen. Any help?

[@Roelox]

Did you enable the display in the web interface?

[@blackhat5076]

@@Roelox brw I have also this problem

[@blackhat5076]

@@Roelox i enabled display interface also but not working

[@Roelox]

​@@blackhat5076 Add my discord Roel#6931 so I can help u.

[@DeepakSakhija]

@@blackhat5076 SDA to gpio 5 and scl to gpio 4

[@channelminecraft2857]

how to reduce the delay on the intro or the beginning when it is turned on?

[@Roelox]

I have no idea.. Sorry man.

[@neftalicabanas9085]

good video, I'm just starting in the world of arduino, but what do you do at minute 4:27??

[@Roelox]

Hey man, I am pressing CTRL + F on my keyboard.

[@neftalicabanas9085]

@@Roelox Thank you very much bro, but I have another question, I did the whole procedure and made the connections with the oled screen.... GND(-), VCC(+), SCL(D1), SDA(D2), but it doesn't give me an image Do you think I made my connections wrong or should I change the screen?

[@Roelox]

SCL is D2 and SDA is D1. Did I put it wrong somewhere? Because more people made this mistake.

[@Czasnabudowanie]

HELP!! I am at the stage of connecting to the network. Instead of the network name pwnet I have the name deauther (I work on macbook all the time) when I enter the password "deauteher" as in the film I cannot connect to the network because the network does not have an IP address and secondly it requires a WP2 password do you know what I mean?

[@Roelox]

Hey man, there should be a network called "pwned" with the password "deauther". Could you contact me on discord, my name on there is roelox.

[@neftalicabanas9085]

hello, a question in the last part after giving "reboot" the oled screen does not turn on, and I already checked all the connections and they are fine as well as the screen. Do you know what could be the problem?

[@neftalicabanas9085]

Do you have a page where I can contact you privately?

[@Roelox]

U can contact me on discord, my name on there is roelox

[@neftalicabanas9085]

@@Roelox OK, thanks a lot

[@felipezxc1]

Could you share the 3D printing project presented at the end of the video?

[@Roelox]

Files: drive.google.com/drive/folders/1hOwY2rBeck8A_9g6uL0Vb677g8SvkBsG?usp=sharing NOTE: The hole in the case was too small for the usb cable to fit in, so I made this bigger after printing. The link is also in the description.

[@channelminecraft2857]

Bro, make a tutorial on how to code with the Arduinodroid , because I don't have a laptop or computer

[@Roelox]

My Samsung A51 Androids version is too old for ArduinoDroid :(

[@bestbeliever9513]

thank you thank you soooooooooomuch bro 👋👋👋👋

[@Roelox]

No problem! :)

[@senid8818]

bro, thank you so much!

[@Roelox]

No problem bro!

[@kermitinmountain6371]

Hi, just a questions regarding to switches: the up, down and select. Are all of the switches are either closed or open contact? Thank you.

[@Roelox]

Normally open contact

[@pacod7_kny451]

i did all said in the video but with a wemos d1 mini, it keep saying an error in the arduino ide output page

[@Roelox]

What is the error message?

[@pacod7_kny451]

@@Roelox raise FatalError('Failed to connect to %s: %s' % (self.CHIP_NAME, last_error)) esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header

[@pacod7_kny451]

@@Roelox can you help me fix it?

[@Roelox]

I think you selected ESP8266 somewhere in the config or settings. If you are using a Wemos d1 mini, make sure your settings are set to the Wemos d1 mini and not the ESP8266

[@Roelox]

If you have discord you can add me Roel#6931 And I can help you further.

[@HTWwpzIuqaObMt]

Are the pins the same for the esp 8266 with pre attached display?

[@Roelox]

I would have no idea sorry

[@HTWwpzIuqaObMt]

@@Roelox i think it will work since the only attachments left are the buttons

[@Ponhareesh-et4lw]

My nodemcu a bit bigger it covers exactly 10 pins leaving no space for wires

[@ziolekanimations2312]

Hey what app are you using for sheme making (its at 0:14)

[@Roelox]

Hey, I used Tinkercad for the diagram, but I also just editted the ESP8266 and display in it. Because I couldn't find that in Tinkercad lol.

[@ziolekanimations2312]

@@Roelox thanks and how do you power the bread board ( yes i know that you connect a USB to a ESP 8266 but how many V)

[@Roelox]

I just used a standard USB cable, I think thats like 3.3 or 5 volt.

[@ziolekanimations2312]

@@Roelox rhx

[@ziolekanimations2312]

​@@Roeloxmy ESP 8266 board only flashes light 2 time please help

[@vehelix]

Can you drop the stl for the case you made and demostarte how you made it please.

[@Roelox]

I will try to find the file this evening.

[@vehelix]

@@Roelox Thanks , i wanna learn how you soldered it and assembled if possible.

[@Roelox]

Sorry man, I couldn't find it.. I do have a picture how it looks from the inside if you want.

[@vehelix]

@@Roelox yes, that will help.

[@Roelox]

drive.google.com/drive/folders/1hOwY2rBeck8A_9g6uL0Vb677g8SvkBsG?usp=sharing NOTE: The hole in the case was too small for the usb cable to fit in, so I made this bigger after printing. (Case and cover .stl file included^)

[@ozjager]

Hey do you know if an oled display which uses SPI interface is also connectable via default mosi and sck pins and maybe with additional pin decelerations ?

[@Roelox]

I would have no idea, sorry. Maybe this can help you deauther.com/docs/diy/display-setup

[@Tinkoplayz]

bro help i made all project but buttons not working i change buttons type but still problem plssss solve

[@Roelox]

Hey man, add me on discord and lets fix the problem :) My discord is roelox

[@gamerzexpopoint]

In Swith connection the other wire is connected to ground?

[@Roelox]

Yes

[@Panda-px1hb]

Im not able to get deauther in board types and also can i use 16x2 screen also not able to find any tutorial with any 16x2 screens

[@Roelox]

You can use the displays listed on this website: deauther.com/docs/diy/display-setup For the board problem. Did you add the link to the Boards manager urls in preferences?

[@fredmunyao787]

Thanks it worked for me

[@Roelox]

Nicee!

[@Chronos-s7w]

the deauth ,when I start deauthing it doesnt have response how to fix this

[@Roelox]

Try to adjust some settings in the web interface

[@Ahnaf_Ishaque1344]

Bro i have a esp8266 board with the 2.6.1 spacehuhn deauther. On the website i have connected each button properly but it doesnt work. Pls help me 😢😢

[@Roelox]

Did you define the buttons in the code? (4:23). If you did and it still doesn't work, add me on discord, my name on there is "roelox".

[@Ahnaf_Ishaque1344]

But bro I use the esp master flasher. So can I just edit the code then just flash everything as done ?

[@Roelox]

Iguess, I have never used something like a esp master flasher. Is it like the esp web tool? If you can't figure it out just add me and I will take a look.

[@uglybo1717]

The oled keeps showing like a staticky screen and I can’t even see the original

[@mrtn]

and how do you turn this into a portable watch

[@Roelox]

Attach a small battery and some straps Iguess

[@mrtn]

@@Roelox where do you attach the battery?

[@MsLuis735]

In my display I have the pin VCC GND SDA and SCL Connect everything as it says in the video and it doesn't work for me on the display

[@Roelox]

Did you enable the screen in the web dashboard?

[@MsLuis735]

@@Roelox Yes, I followed the steps as in the video

[@Roelox]

Sorry for the late reply. Do you have discord, so I can help you further. My discord is Roel#6931

[@Kol_X]

I can't get it to work with a 1.3” oled display, it displays random dots around the screen, can you help me?

[@Roelox]

I will help u, add me on discord. My name is roelox.

[@Kol_X]

I solved this problem by changing “erase flash: sketch to sketch + wifi settings” and then flashing it again

[@ishu8323]

black screen seeing only blue dots at left side of display pleas healp

[@Roelox]

Hey, add me on discord or join my discord server so I can help u. discord.gg/rvPvqVFrUc

[@techy_thanos]

Up, Down and Ok switch is not working 😞 Please help me 😭

[@Roelox]

Did you define the buttons?

[@techy_thanos]

Yes D3 (GPIO 0) for Up D5 (GPIO14) for Down CLK (GPIO6) for Ok Am I right??? But still not working 😢 Is there any option to enable??

[@Roelox]

If you followed my video u should define them like this: #define BUTTON_UP 14 #define BUTTON_DOWN 12 #define BUTTON_A 13

[@techy_thanos]

​@@Roeloxthank you. I will inform you after testing 😊

[@giovannibavai2783]

Hi bro great video! I have a little problem, I followed the process but when I turn on the oled screen, the writings are all choppy and not distinguishable. the displays work i have verified. Do you know what the problem could be related to? thanks in advance! take care

[@Roelox]

Hey man, thank you! Do you maybe have discord, that would be easier to check this problem. My discord is roelox

[@Karol8c]

Sir the wifi connetion is not showing "pwned" network. can you help me?

[@Roelox]

Sure, do you have discord? If you have, add me, my name on there is roelox.

[@ModernRetroRider]

Hi sir, I did this and it worked! however, one question is how to add RGB led? what is the pin out and the code?

[@Roelox]

U added me on discord right?

[@bluesquid2291]

its a bit of an old-ish video, but do you thinl you could tell me what oled screen exactly it was you used, seems perfect size

[@Roelox]

0.96 inch I2C SSD1306 OLED display

[@bluesquid2291]

@@Roeloxthanks, does the colour (blue or white) matter at all?

[@Roelox]

​@@bluesquid2291no it doesn't matter

[@SuuuHam]

from where u brought the link that u pasted in the preferences?

[@Roelox]

Hey, I got it from here: deauther.com/docs/diy/installation-arduino/

[@fabian_ftn6604]

One Question, so If I want to use it how do I power it? Do I need to have it connected to my pc/laptop for it to be powered and work? or could I just use like a 3.3v battery after setup?

[@Roelox]

You don't need to connect it to your laptop or pc. U could for example use a 3.3 battery yes. It just needs power in order to work.

[@andre-rvj3]

Button don’t work, please help me

[@Roelox]

Hey, take a look at 4:25, you need to define them in the code.

[@vishalbeniwal8631]

How can i remove this from my esp8266 if needed and make it like it was new???

[@Roelox]

Iguess just flash an empty project

[@yairzigdon1273]

can i do the same project with an lcd screen? like the blue ones

[@Roelox]

No, you will need an oled screen for this project.

[@vid_da-m1y]

Working How to add resistors? Which pins to connect?

[@Roelox]

I have no idea... Why do you want to add resistors?

[@vid_da-m1y]

@@Roelox I just make it working with nodemcu v3 (ch340) with 12x12mm push button, sh1106 i2c. Sometimes, it gets stuck on scanning.., or button not working, not showing display, each randomly occured. I dont know why, guessed the power is not enough.

[@Roelox]

That could be the problem yes, but sadly you can't give more power with a resistor.

[@marc187erz]

Hi, my problem is, that there is no wifi like pwned what did i do wrong?

[@Roelox]

Hey, maybe double check if the files are correctly flashed or maybe flash it again?

[@marc187erz]

@@Roelox ok, I'll try it thank you very much for your fast reply

[@verqlickt2088]

Yo, I can't get my buttons to work, I need to define them, how?

[@Roelox]

Look at 4:25

[@psa4350]

If I wand use spi monitor Which headers should I connect?

[@Roelox]

deauther.com/docs/diy/display-setup GND GND VCC/VDD VCC / 3.3V SCL/CLK/SCK GPIO 14 (D5) SDA/MOSI GPIO 13 (D7) RST/RES/RESET GPIO 5 (D1) DC GPIO 4 (D2) CS GPIO 15 (D8) or GND

[@psa4350]

@@Roelox thanks a lot🙏

[@DARKFF_pc]

yo bro can you help me i coded the program but oled screen is not working i dont know how to fix pls help asap i am subbed wifi is working and pwned is showing but oled not working pls help me

[@DARKFF_pc]

and i am not using bread board but i did connections the same

[@DARKFF_pc]

pls reply

[@Roelox]

Do you have discord so I can help you better? My discord is Roel#6931

[@Roelox]

Btw, did you enable the screen in the dashboard?

[@DARKFF_pc]

@@Roelox i send freind request

[@Ansh_Krish]

Bro can u help me my oled screen is not working Would wait for ur reply

[@Roelox]

Hey man, make sure that you enabled the display in the webpanel. Check if these connections are correct: SCK/SCL -> D2 and SDA -> D1. If this doesn't help, add me on discord: roelox

[@LucasDroper]

I did everything like the video but the buttons don't respond. Does anyone know what can it be?

[@Roelox]

Hey, did you define the buttons in the config file?

[@Roelox]

Take a look at 4:25, u need to define the buttons. #define BUTTON_UP 14 #define BUTTON_DOWN 12 #define BUTTON_A 13

[@LucasDroper]

@@Roelox thanks

[@josealbertopeinadosanchez7010]

What display are you using SH1106 or SSD1306 ? I´m using a Wemos D1 mini pro and display didnt work but the APP yes

[@Roelox]

SSD1306

[@lanphuong1698]

My buttons don't work, can you help me?

[@Roelox]

Did you define them? Also add me on discord name: roelox

[@HUNTERJUSTFISHING]

I could not find the board (deauther esp8266 boards

[@Roelox]

Did you add the link in preferences?

[@HUNTERJUSTFISHING]

Ill try and let u know​@Roelox

[@HUNTERJUSTFISHING]

​@Roelox and where is the link?

[@Roelox]

​@@HUNTERJUSTFISHING In the description of this youtube video

[@HUNTERJUSTFISHING]

Ty​@@Roelox

[@GsRauL]

Hello my oled does not turn on, I think it is because it is the oled i2c model instead of sck , it has slc help me please, try everything and nothing

[@GsRauL]

oled is: vcc - gnd - scl - sda

[@Roelox]

Try to define DISPLAY_EXAMPLE_I2C in the A_config.h file. If you don't understand add me on Discord so i can explain it better. Roel#6931

[@MAMUCAhaipotio]

al entrar ala pagina donde se enciende el led pongo la ip y no aparece

[@Roelox]

¿Estás conectado a la red pwned?

[@BinduMurali-e5i]

How to add neopixel light?

[@Roelox]

GND GND VCC VCC/3.3V DIN GPIO 9 (SD2) deauther.com/docs/diy/display-setup

[@BinduMurali-e5i]

@@Roelox bro the up down ok buttons is no working. I already connected to D5 D6 D7 please help

[@Roelox]

Did you define them?

[@gamerblaze8974]

Can I also use an esp32??

[@Roelox]

No, you can't use an esp32 for this project.

[@FLVINZ]

Can you make a video with rechargeable esp

[@Roelox]

With a battery? You can just use a powerbank haha

[@SV_49Edit]

Nothing popup on oled display

[@Roelox]

Did you enable it in the web dashboard? Also add me on discord so I can help u better, my name on discord is roelox.

[@ramchandranaik6655]

Do we need to connect to pc when use have to use it

[@Roelox]

No you don't need to connect it to a pc, the deauther just needs power in order to work.

[@vehelix]

Question. How'd you solder the buttons to the case

[@Roelox]

Glue!

[@vehelix]

@@Roelox what I meant was, how did you connect a jumped cable to a button with 4 pins

[@Roelox]

@@vehelix i don't really know how to explain but, 1 pin for the input (connected to the ESP8266) and 1 pin for the GND (I connected all the buttons GND wires to each other + display GND wire and connected 1 GND wire to the ESP8266)

[@absolutelynothing9150]

My oled doesnt turn on and cant even find the pwned wifi

[@Roelox]

Add me on discord: roelox or join my discord server discord.gg/rvPvqVFrUc

[@xxac37xyt]

Hey my esp8266 has and oled screen on itself will that work too?

[@Roelox]

I am not sure about that, you will maybe need to modify the code to get the display working. But it shouldn't be that hard, just changing some pin numbers.

[@xxac37xyt]

okay ill try then @@Roelox

[@Roelox]

Goodluck!

[@guillermosg7950]

Nice video. Are you working with the esp8266 or esp32? If its not the esp32, can I do this project with esp32?

[@Roelox]

Thnx, I am working with an esp8266 and I don't think you can do this project with an esp32.

[@guillermosg7950]

@@Roelox thanks bro, do you hace a discord Channel/Instagram or whatever? I would like to follow you

[@Roelox]

I only have a private instagram, sorry man

[@crissgill6505]

Can i use esp8266 ch340G to upload this same code❓

[@amaldeep3791]

Thanks a lot brother...❤ How can i turn off flip display ? i tried changing #define flip_display false But not working

[@Roelox]

No problem man! It will be #define FLIP_DIPLAY false

[@Szprej0]

screen size?

[@Roelox]

0.96 inch Oled

[@Szprej0]

0,96?

[@Szprej0]

@@Roelox thx

[@kalashnikov_47z]

I used ESP8266 Lolin But display working Button are not working please help

[@Roelox]

Did you wire everything correctly? Also add me on discord Roel#6931

[@kalashnikov_47z]

@@Roelox I use apk version which direct installs deauther to board

[@Roelox]

@@kalashnikov_47z Try the method I am doing in this video, maybe that will work.

[@kalashnikov_47z]

@@Roelox I'm trying now If it success i will let you know 💪❤️👍

[@Roelox]

@@kalashnikov_47z Goodluck!

[@jernejmarolt2260]

@Roel i cant conect to esp's wifi

[@Roelox]

Doesn't it show up? Or wrong password? Or What is the error (message)?

[@hstvgaop1678]

My screen is upside down how to fix it!!

[@Roelox]

Use #define FLIP_DIPLAY true (Yes its DIPLAY and not display)

[@DharmendraSingh-mk9gr]

Please tell me bro how to do this by mobile I don't have computer 😢

[@Roelox]

I have never done it, but maybe this can help you: hackaday.io/project/183433-how-to-program-arduino-and-esp-using-mobile-device

[@prod_jay2132]

Can we use esp32 instead for this project?

[@Roelox]

No you can't use an esp32 for this project.

[@prod_jay2132]

Is there a code available for esp32?

[@Roelox]

the esp32 doesn't meet the requirements to perform a deauthentication attack.

[@kianserwelas900]

Do you connect in 1 GND to all buttons?

[@beaststreamer4832]

Yess

[@FLVINZ]

why my tft not working? is there any setting for tft size? btw i play gt hehe

[@Roelox]

Huh, tft size?

[@FLVINZ]

@@Roelox the OLED

[@Roelox]

@@FLVINZ Did you enable your screen in the web dashboard?

[@dedimulki1380]

Mr. Can modif deauth+ eviltwin+phising ?

[@Roelox]

Should be possible, but I have no idea how.

[@axelowgeneta226]

Bro i just want to ask for oled 7pin display, is it just the same step? Pls help thankss a lot 😇

[@Roelox]

I think it will be diffrent, because in my video I am using a I2C display and a display with 7pins is a SPI display. I've actually never done it with a SPI display, but u could take a look at this: deauther.com/docs/diy/display-setup

[@axelowgeneta226]

I already did this tutorial bro but the problem is it's always restarting, i did every step in the video, it happens every time i choose the SPI example in tools

[@Roelox]

Yeah tbh, I also always had problems when I selected the SPI or I2C examples. add me on discord: roelox . We can try some diffrent things.

[@axelowgeneta226]

Sure bro whats your dc

[@Roelox]

​@@axelowgeneta226my discord username is: roelox

[@kianserwelas900]

Can i use wemos d1 mini?

[@Roelox]

You can use the LOLIN (WEMOS) D1 mini, but I don't know if there is any difference between a normal wemos d1 mini and the LOLIN one. deauther.com/docs/diy/supported-devices

[@eliotbenjamin4]

Bro my switches are not working 😢

[@Roelox]

Add me on Discord or join the discord server so I can help u

[@AaronSmith-f2r]

Bro, my screen is staticing, is cuz it uses sh1106 ?

[@Roelox]

I think by default it uses the SSD1306 display, but you can define the SH1106 in the A_config.h and that should work. If you don't know how, add me on discord: roelox

[@AaronSmith-f2r]

@@Roelox I've sent it, i would be much appreciated if u help me with this one man

[@Roelox]

I've added u :) ^

[@yesiamuchihasasage197]

my deauther buttons aren't working

[@Roelox]

Did you define them?

[@yesiamuchihasasage197]

@@Roelox i took a look in the aconfig file and it seems so

[@Roelox]

Do you have discord so we can find out what the problem is? My discord is Roel#6931

[@yesiamuchihasasage197]

@@Roelox yes mine is dead_user_zxczxczxczxc#2050

[@sabagloveli807]

Hey, how can i flip the display?

[@Roelox]

I think if you add "#define FLIP_DIPLAY true" under // ===== DISPLAY ====/ in the A_config.h file it should work.

[@sabagloveli807]

@@Roelox it’s already written, i changed it to false but nothing changed on the screen.

[@Roelox]

@@sabagloveli807 Okay maybe try to add "#define FLIP_DIPLAY true" under #elif defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER)....... If that doesn't work add me on discord Roel#6931

[@crissgill6505]

Can i use esp8266 ch340G lolin to upload this same code ❓ because i cant found cp2102

[@Roelox]

Yes I think the ESP8266 CH340G should also work.

[@crissgill6505]

@@Roelox too fast to reply ❤️ thanks brother

[@Roelox]

It is btw really easy to find the ESP8266 cp2102 on ali express^

[@crissgill6505]

@@Roelox okay but i just brought from Amazon.... Ch340 ... Wrong one ....😅

[@Roelox]

Ch340 does also work^

[@shashankreddygamer6272]

Bro help me I had a Button issue plzzzzz help me 😞

[@Roelox]

Sure, do you have discord? add my discord Roel#6931 so I can help u further.

[@merab1nad1radze]

​@Roelox bro I have problem to with buttons can you help

[@Sami-khanYT]

Which link is the code?

[@Roelox]

This is the link to the code: github.com/SpacehuhnTech/esp8266_deauther I have it in the description, but I think it needs to be verified or something.

[@Skuert]

у меня кнопка ок не работает что делать ?

[@Roelox]

Проверьте правильность проводки.

[@Skuert]

100 раз проверил, и отдельно от всех подключил ​@@Roelox

[@Roelox]

Add me on discord, my username is roelox

[@CodesExplorer-hb1wr]

I try it with no display and no buttons it working i control it on my phone

[@CodesExplorer-hb1wr]

@Ujjwal Hacker yes

[@MikeeOkk]

Is this also for v3

[@Roelox]

Yes it should be the same, but I haven't tested it yet.

[@MikeeOkk]

​@@Roeloxi need help the display doesnt work i tried everything i tested the display with a simple display it works but not on the deauther

[@Roelox]

@@MikeeOkk Double check that SCK is connected to D2 and SDA is connected to D1.

[@MikeeOkk]

@@Roelox yes it is connected all the connections are fine im using a i2c ssd1306

[@MikeeOkk]

@@Roelox my display is voc gnd scl sda

[@rodriguezfranco3839]

Those deuther are not working anymore since almost every modem now is 5ghz someone needs to step up the code and harware to keep up with the advance of wifi

[@Roelox]

Yepp.. But u could always buy a wifi adapter with monitor mode and packet injection that supports 5GHZ and deauth with aireplay-ng.

[@rodriguezfranco3839]

@@Roelox oh damn that would cool af , could you do a video explaining a bit more about it?

[@Roelox]

My adapter only supports 2.4GHZ.. :(

[@DillemaFixer]

Display is not working(

[@Roelox]

What kind of display are you using?

[@DillemaFixer]

jmdo 96d-1

[@DillemaFixer]

@@Roelox Can we switch to Discord for convenience?

[@Roelox]

Of course

[@pheanoukma]

same my display aint working