What’s New on Midsize Drawer Systems | Everything You Wanted to Know

[@tomorrowtactical]

I'd like to see the platform go all the way up to the bed rails. Its already taking up the whole bed, why not just make it taller and double as a tonneau cover? A bunch of my camping gear is too tall to fit in those drawers, so I'd be compromising a lot of space.

[@prestondeters5093]

I've always thought it would super cool to have a double decker version that would sit flush with the bed rails. Probably extremely difficult to engineer that.

[@samuelwade6935]

That’d be a cool option. I personally love this new one because there’s still enough space up top to throw some plywood, bins, ect and strap it down

[@xavilicious]

I’ve thought the same thing. I’d like deeper droors, my painting gear is too tall as well.

[@tenncutt]

Great idea! A tall option

[@fratdaddy7434]

Could you lay it sideways?

[@codysnell]

I really like my 1.0 system, but I wasn’t sure I would want to do it again. What you’ve done with the 2.0 makes it an obvious yes. Well done!

[@Decked]

🫡

[@Dad_onthetrail]

This is going to be perfect for camping.

[@kyletasik7050]

It would be cool to develop a storage bin that sits over the wheel well for the full length and height of the bed. This would make that awkward space more functional and wont take away to much from the more usable portion of the bed. I think the larger single storage bin is a lot better than the two narrow bins for the mid size trucks. Nice job!

[@calgreco8607]

I was thinking the same thing but above the bed rails like an 8" Tall Deck so I can mount a roof top tent and keep below cab have a drawer on each side.

[@microsnook3]

I'd like to see more of the system, IE: opening the back "ammo cans" and showing the pass through using an object, etc. Also, you mention beer in the organizer part in the front of the drawer, is this water tight? If we use ice will it melt into the rest of the drawer? Thank you. Looking forward to seeing more about this.

[@Decked]

Stay tuned! More coming!

[@jackbriscoe1504]

I wish I would have known about this 6 weeks ago when I ordered the old version, I would have waited for this version.

[@manuelmendoza5238]

Well alright then. This looks incredible, and it looks like a lot of thought and fun went into it. Thanks for the video.

[@jkstormtrooper9617]

Great updates. Makes more sense to do the single larger drawer for mid-size. Since it sits below the bed rails, I can use the trail rail system on my Gladiator.

[@RavensEyeOffroad]

I really like this new design. It addresses several of the knit-picks I have heard in the past on my channel. I ran DECKED in the past and loved it and every product I ever got from DECKED was top quality. I think this design would be extremely versatile as well. I would apply for to become an ambassador, but I don't think my channel is big enough to get considered for it.

[@maxf.2164]

Hi Guys, the old system was available for the Mitsubishi L200/Triton in Germany. Does the new system will be availebel to for the L200? Greets

[@Decked]

It should be! Stay tuned!

[@bobbyhale4599]

Does the drawer lock? I heard you say I need to purchase locks for the stash bins, but the drawer itself?

[@tonyarce5427]

As an owner of the legacy system for a Gladiator… it was inefficient. Can you show a photo of the drawer by itself in a Gladiator bed? I did that with the legacy drawers and it was eye opening!

[@nickaltvater5592]

Are there stash bins in the front?

[@maxtrap1947]

Love the first version for the Chev 3500. Version two looks like it has the option to install a lock cylinder, but I didn’t see or hear that. Great marketing, as always.

[@Decked]

Locks can be added to the Drawers, (Same as our Legacy System) But now you can also add locks to your Stash Bin Lids as well!

[@carlosandrade7439]

Does the new system still end 6'' or so from the tailgate?

[@donbrum2264]

Can you get the firearm dividers in the mid sized deck system?

[@Decked]

We've got some in the works!

[@ScotWithOnet]

This seems like a good system for hauling plywood in a midsize truck since they are all too narrow to fit a sheet between the wheel wells. This deck system gives a wide flat bed. Can the drawer be extended and used to support longer items (plywood, kayak, etc.)?

[@phillipotoole]

Can you access the space in front of the wheel wells?

[@roberthall7929]

When will the single drawer be available for the F150???????

[@Decked]

Not in the works currently. However the New fullsize System utilizes 10% more space than the legacy System, for extra storage!

[@lex8713]

Have you been talking with Toyota and will this system work with the new 2024 Tacoma iForce-Max with the larger outlet casing in the back along with optional Air Compressor housing? I’m really interested in this product and I’m looking at purchasing the 2024 Tacoma when it is released.

[@romand123]

I'm looking at buying this draw system and a cargo glide for my 2023 Tacoma. My ARE contractor cap has a tool storage box on one side of the cap so I'm wondering if I can mount the cargo glide off center and over to the other side of the bed to give me some room under the tool box. Is that something you can do or does the glide have to go smack in the center of the storage system?.

[@Decked]

Unfortunately, the CargoGlide needs to be mounted center on the new Drawer Systems. (As we provide brackets that aren't modifiable.)

[@romand123]

10-4, thanks for the reply!

[@MichaelGalletly]

I've been thinking about a Decked system for my '19 Ranger, but couldn't pull the trigger because I didn't think the trade-offs would make it worth it, but this has real potential.

[@Decked]

Check one out in person! They're a game changer!

[@nathanlozier1817]

Is there a way to divide the drawer lengthwise?

[@Decked]

We do have some accessories in the works. Mainly for now, our cases will offer ways to divide your Drawers

[@calgreco8607]

While the updates look great! This will not adapt well for my new 23" Tacoma Short Bed. What would be nice is a full length on top of Bed Rails with drawers on each side. I would need a total Height of 8" tall so drawers would probably be only 5" deep but that is ok. It would have to be able to mount a Roof Top Tent on Top. This leaves space underneath for Power generator, Frig. Cooking station on a pull out. Just an Idea?

[@kodynielsen7056]

Have the legacy in a ‘23 Ranger and love it. The extra space does look nice but opening the drawer and then boxes to get to tools on the farm sounds miserable. Really like the dividers in the legacy system. Still looks like a quality made product like the others.

[@Decked]

🫡

[@devincutting3198]

Is it possible to have a rubber mat on top of the drawer system resting in between the tie down points on the unit? Love the new design, can’t wait to check it out

[@Decked]

Our new Battle Mats have cutouts for the D-Ring Tie Downs, as well as the Stash Bin Lids!

[@jeffthrobodeen]

While the overall system is not waterproof (water etc can get in the bed of the truck) is the big assed drawer waterproof, if weather strip at front of drawer is properly installed?

[@Decked]

Our System is 100% weatherproof!

[@CulinaryMalcontent]

Does it still work with a Leitner Forged bed rack for a 2020 Tacoma? 🤞

[@Decked]

Sure does!

[@richardxue8277]

Will this decked drawer system compatible with the deck slide on top of this drawer??

[@Decked]

Yes, and even more compatible! The CargoGlide will bolt directly to the D-Ring Tie Downs. No more drilling required!

[@richardxue8277]

@@Decked will you have a video on that?

[@tenncutt]

I saw someones video that said they needed to lower their tiedowns in their 18 Frontier which required drilling their bed. Is this required on a 22 Frontier? My 22 Frontie also has the factory rails around the bed, these aren't an issue are they?

[@Decked]

The factory rails shouldn't be an issue! If you have 4 tie down locations in your bed, you won't need to drill!

[@thereelangler2391]

Can you buy or partner with the Bolt Lock people so I can use my truck keys for all the locks?

[@tenncutt]

How far does the drawer extend beyond the tailgate when open on a 5ft Nissan Frontier?

[@Decked]

Check our tech specs out on the website!

[@michaelduncan2759]

Hello, will there be gun racks available for the mid size Big Ass Drawer?

[@Decked]

Not in the immediate future! It is in the works, but it'll take some time!

[@ryoc2138]

I'd love to see you guys develop a gasket that goes around the outer edges of the Decked system to prevent stuff from falling down between the system and the truck bed. Every time I drop something within a mile of my truck it somehow manages to fall down in that gap.

[@mavrikmavrik3032]

Can you fit long rifle cases in the drawer? It’s hard to tell if the drawer opens enough to get 2 or 3 cases into it.

[@Decked]

Yep, you should totally be able to fit 2 or 3 rifle cases!

[@thecatinthehata3910]

Ugh...you fixed all of the complaints that I've had with my old mid-sized version. Any suggestions on what to do with my old one now that I'm probably going to buy the new one at full price? BTW...thank you for acknowledging that taking the old system out of the bed is a huge pain in the ass. It really, really is.

[@Decked]

Shoot us an email at [e-mail]!

[@skadelbai1]

Can we still order them with the two sliding drawers?

[@Decked]

Not for the midsize truck, no

[@LandoCortez]

Whats the measurement between tie downs? They seem to be a little too narrow to easily strap down 4x8 sheets of plywood with very little wiggle room. I would be annoying having to center sheet goods every time.

[@Decked]

Fullsize - 52” Mid Size - 46.5”

[@xavilicious]

Can you get this new model setup with the one big-ass droor for the 22-24 Tundras?

[@Decked]

Nope, that's only an option for midsize trucks. Tundras are full size, which get our new and improved 2 Drawer System

[@jenk0062]

Is it possible to mount a bedslide on top?

[@Decked]

Check out our CargoGlide! They can be mounted on top of the Drawer System!

[@lja3657]

3.0 I want a slide out tray on one side and the drawer on the other.

[@hbjeff36]

So the area that used to be ammo cans is definitely not watertight right?

[@Decked]

The Stash Bin Lids are actually lockable, and waterproof now!

[@hbjeff36]

Yeah, but if they lead to open bedspace that will just have water coming over the edge of the deck

[@mrhackett1984]

Looks like the Decked 2.0 drops payload on the Gladiator by 1000lbs? Original could handle 2000lbs, but newer is only 1000lbs?

[@Decked]

Yes, the midsize System is now 1k. This is to better match the payload of a midsize truck, which is rarely 2,000 pounds

[@mitchelodeon]

So the drawer length is only 36" on a 5ft bed?

[@Decked]

Depends on the System! Dims are listed on every product on our site!

[@Watchdog_UFOtestpilot]

Called today to see about whether to wait or take the discount n the older version. Glad I waited. I’ll be placing my order shortly. Keep up the good work, you guys make awesome products.

[@Decked]

🫡

[@TacoRancher]

Very cool - but I thought it would keep guns etc dry if raining

[@GAJake]

Can you make a ford maverick version?

[@Decked]

In the works!

[@GAJake]

@@Decked Awesome! I’m sure the smaller bed makes it more difficult

[@rubenstones8684]

any coupon codes out there?

[@Decked]

Same low price, 8 days of the week!

[@christopherwhitebread7100]

What about the gun racks

[@Decked]

We'll be releasing new Piecekeepers soon!

[@davidjames4914]

Everything is better for accessibility other than the single drawer. Unfortunately i am now going to have find another option for a bed storage system. As a outdoorsman the ability to separate gear and equipment from side to side is a barebones requirement. The last thing i need is to drive 8 plus hours away to out of state hunt to find my bowcase beat to shit and the sight shifted or damaged because of things moving in the single drawer. Had a great product before that couldve been made better by the small changes, now i cant even consider this as an option

[@Decked]

Check our site for Legacy Drawer Systems. We're selling them while supplies last!

[@michaellamoreaux1825]

Only see a few problems. I did not hear about any organization in the big draw. One big draw to have things slide around. The ammo can need a close out panel. Do not want things to try and fall out when I open the tailgate.

[@Decked]

The passthroughs have stash bins, that are included with purchase!

[@futurefesty90]

Hear me out. Make one for the last generation of ford ranger. They were the same bed style for like 20 years and there's still a butt ton of them on the road.

[@kylewhitbeck3578]

Hopefully you guys are throwing free hats or shirts into these day one orders👀

[@Decked]

Not yet, but we should have new merch available soon~

[@axs017]

Please make one for the 4Runner 😢

[@GAJake]

You can probably make your own since you don’t need weather proofing since it’s an suv m.kzbin.info/www/bejne/l3rMn2WopppjbqM

[@stevenallen8357]

Cool accessory but won't fit my '83 FSJ Cherokee.

[@timstromer8781]

Make that for the full size

[@marshalllapenta7656]

Nice Although I could build a better compartment system for less money!

[@Decked]

Do you make your own soap too?

[@DavidRogers-vf7vg]

Why would you take away the dividers. I’m not trying to open 5 things to get to one tool.

[@Decked]

Crazy that 1 tool can be in 5 boxes at once!

[@LawnMM]

Needs to be 2-3" shorter its still eating too much vertical space in the bed for a drawer

[@Watchdog_UFOtestpilot]

No. You want a cargo tray. 2.5” deep drawers wouldn’t do the rest of us any good. My solution to the elevation issue, is to put a double wall stainless steel locking canopy with side doors. That gives me the drawers, space on top the deck, room for guns/supplies/equipment/etc., in my cases/bags, and I can go to work, or the range, or a week long rifle training course, or a camping trip, or whatever I want to do. If the drawers were ~3” deep, there wouldn’t be a point to having them, IMO.

[@LawnMM]

@@Watchdog_UFOtestpilot it's like 8" high now, shaving 2-3" doesn't make it a 2" drawer Maybe that's what YOU want, I'll take a smaller drawer, I already have a cabinet at my house Your solution is great 👍 if you want to spend another $2-$4k on top of the deck to make it work, enjoy

[@Watchdog_UFOtestpilot]

@@LawnMM I’ll spend whatever it takes to set whatever I’m setting up, to work for what I need. Sorry your disappointed. I’m super stoked.

[@LawnMM]

@@Watchdog_UFOtestpilot not disappointed, just not sacrificing 80% of my bed space for a plastic cabinet 30-40% and we'd be talking, it's too big 🤷🏼‍♂️

[@DAMANIAC432]

We lost the bottle opener! 😭

[@sapperROSS]

Beer tastes better in cans anyways.

[@DAMANIAC432]

​@@sapperROSSsaid no one 😂

[@southpaul48135]

Cleary not available on web site

[@Decked]

They're available! However the single Drawer is ONLY available for midsize trucks!

[@polotov7]

Like the new design but not making it water proof is a deal breaker. You made bigger for storage but then storing my stuff in those boxes takes up storage so what’s the point? Just make it water proof and be done

[@Decked]

Our Systems are 100% weatherproof

[@corbindallasmultipass]

"free accessories" lol YOU just upped the price. ANd free shipping is not free, again, you upped the price to INCLUDE shipping. I remember when these use to be closer to 1k... 300 for shipping and 1-200 for the bins... nice new price. Please make it possible for the price to be less for people who do not want the bins!

[@Decked]

Shipping IS still Free! We redesigned the System from the ground up. Making it better than before, therefore we raised the price a couple hundred bucks. Well worth it!

[@corbindallasmultipass]

@@Decked I remember these before shipping was included. It's not free, you must included it in the price. These use to be around 1k before shipping and the accessories were an option. The price now simply includes shipping and the accessories.... They are not free

[@scottburleson4882]

wHat's a wHeel?

[@p.VAZ.]

KiCK ASS 🎉🎉🎉🎉

[@patrickmanfred]

LIES. The drawer does not go all the way to the cab as he says in the video. Tacoma version drawer is 11" shorter than the system length. Why? Also why doesn't your marketing guy know this?

[@garrettlang1900]

Send me one lol

[@pablogarcia526]

Customer service?🤔 what’s the phone number 🤯

[@Decked]

[e-mail]! Shoot us an email!

[@pablogarcia526]

@@Decked already order the system for my Tacoma I’m waiting for it thank you but it’s better that you guys have a phone number

[@lovablepersona5000]

These drawers are junk and the worst part about it is the company does not stand behind their product at all. Period. Go for a more quality system like goose gear.

[@spatialized24]

So overpriced

[@Decked]

The System itself comes with 2 new and improved cases, 2 improved dividers, our drawerganizer, free shipping AND a Lifetime Warranty. All for 1600 bucks. Sounds pretty damn good to us!

[@scottparker9341]

I've wanted a Decked system for awhile now. After watching this video, I am no longer interested in one at all. Thanks decked, just saved me $1200!!!

[@Decked]

Why's that, Scott? Care to elaborate?

[@mindbullet556]

What’s the issue?