Deebot M80 Won’t Charge, Manual Troubleshoot No Help

[@PrintStick]

Wow I cannot believe it , this worked ! I could not even find the battery replacement I was ready to buy a whole new machine - thank you so much

[@arlianaarmstrong]

I literally tried everything and even called their troubleshooting dept after I tried everything and they were no help. This completely fixed it. So thankful!!

[@thefixer8387]

THAT, is exactly why I posted the video. Thank you for the nice words.

[@mirimiri524]

My problem was a bit different. Mine just shut off with no red light or beep while cleaning or charging. I called the company and they gave me some troubleshoot which is for sure on their manual. Didn’t work. I tried what this video shows a couple of times and now my debit is cleaning like a magic!! Thank you!

[@amyclare5528]

I was having the exact same problem with my deebot, tried adjusting the battery prongs and it worked perfectly! Thank you for sharing this info.

[@gottabekidding8626]

Nice! Same deebot (M80), same issue, did same fix, and it's no longer going to the trashcan!! Thanks!! :-)

[@thefixer8387]

So glad it worked.

[@getbackusa6161]

You are the best! I rebuild my battery, and there is no improvement. Unit was on its way to the trash when I stumbled on your video. Thank you so much.

[@ThePathbauer]

had the same problem, also a 1 year and a half old vacuum. Thank you!

[@thefixer8387]

Excellent, I hope it stays functional for a long while but these tools don't last forever. They have a lifespan. I eventually swapped out the brush motor to extend to life of mine. That vid is on my channel as well. Thanks -

[@ThePathbauer]

@@thefixer8387 Yeah the only issue is that I can't get spare brushes and accessories in my Country 😥

[@thefixer8387]

@@ThePathbauer That means you're going to have to take good care of what you have to make it last as long as possible. Hopefully they will be available in the future.

[@kathieperry5009]

Thanks, it worked! I've been looking for the solution for a while.

[@AmuckPVP]

Thanks, I ended up putting a wooden stick under the metal prongs & hot gluing it so I don't have to do it again.

[@bharathkg]

Wow that trick magically worked on my M80 pro Deebot ! i thought i had to trash my vacuum now it gets a new life.

[@thefixer8387]

If the metal contacts can't make contacts with the battery then there's no juice. This happens with a lot of different battery powered equipment so check this first before throwing stuff away.

[@tonylomazzo5100]

Thank you. This video helped me fix the problem!

[@hectorcastillo3943]

Mine did not charge, it was able to locate the charging station but not to charge when it got on top of it, I tried the same, pull the connector pins a little and that solved my issue. Thanks.

[@thefixer8387]

So glad it worked for you. Good to save some money and fix your stuff isn't it?

[@lynnburkett8513]

Thank you so much for sharing the fix you found from another video. It worked for my M80 also! The battery contacts stopped working after an accidental flip over of Deebot. Hooray!!!

[@shek9]

Great video first one I've found close to what I'm looking for my yeedi mop and vac . With no help from yeedi. I found ecovac makes my battery. Mine saws low battery and then just goes off. I'm trying to find a simple way to recharge it.

[@nightsong1975]

Thank you so much - worked like a champ!

[@corythompson7115]

Thank you for this video. You saved my deebot from the landfill

[@thefixer8387]

Cory Thompson so glad it worked. funny thing is, now mine seems to have a belt or cog issue and makes an awful noise when it runs. Looking for answers now on that. I will try to fix that and get a new video posted for that problem ASAP.

[@128bhandari]

Thank you so much... mine is also just over a year old and ecovacs was not at all helpful.

[@gcoppinger]

I watched you demonstrate what it was doing when you tried to change it and said “yes! That’s it! Did he figure it out?!” and was pleased to see that yep you sure did. Thank you so much for making this video. Our Chinese robot maid is back in business!

[@thefixer8387]

Glad it helped.

[@MrCarmasterAndrew]

Oh, its a real magic! It works!!!! Thnx

[@Hamilton_x_x]

I have been trying to find this fix for my Deebot for about 2 months! Had the exact same battery issue and was so close to buying a new battery (but couldn’t find one!) Back to clean floors again.

[@rafaelmadrigal9038]

Its giving you a code. Clean all your brushers and remove all the hair from them. The sensors are picking up restriction in the brushers. It did it to mine.

[@thefixer8387]

I cleaned everything I could as well as I could before taking the steps in the video. It didn't fix my issue but i will say keeping it clean is important and I would try that first. Thanks for the comment.

[@SimonMi]

Thanks for the video!! Problem fixed!

[@JordanMazaira]

just removing the battery for me was enough to get it to charge again.

[@mr_tom_1_0]

I would also clean the contacts using a pencil eraser, while I was at it.

[@shilumada5691]

Worked!!! Thank you so much

[@chegolata]

Thanks a lot!!! It is working now!!!

[@MiniMukbangs]

Genioussss thanks for this! It worked

[@jonathanquick6366]

I'm gonna give it a shot now. But the battery is currently on sale for 19.95 on ecovacsparts.com

[@tonym1416]

Thank You. That fixed it.

[@thefixer8387]

Awesome!

[@DougMD]

Great tip! I'm trying it now. Mine appeared to charge then died seconds after launching the vac. Could still be the battery. I found a battery on aliexpress for $50 with shipping. It's also on Amazon $70 but still ships from China.

[@thefixer8387]

That slow boat from China will take a while. I hope bending the contacts will work for you.

[@pmsr9667]

I have the same issue. I got 20 dollar battery n replaced it but even after battery replacement it’s not working.

[@dougrodgers132]

@@pmsr9667 it never worked. I threw it away. Good luck.

[@pmsr9667]

@@dougrodgers132 thanks a ton for letting me know. I won’t waste my time and money on it then.

[@funwithaanya1185]

My Deebot discharged, went to the charging dock but did not charge. Now it is absolutely dead. Any tips on what I should do now?

[@melaniiefviper9721]

Its working thank you :)

[@noblink4619]

Hei, mine beeping just once when docking, any idea what’s wrong?

[@Lilly-wp3ci]

Thanks for video

[@laupoko9445]

thanks

[@NginesChannel]

It worked thanks

[@Magstar757]

I've realized maintaining this stupid thing is much more annoying than just pulling out a regular vacuum and vacuuming yourself! I'm done with all this useless technology!

[@vishnumurtypenta5396]

Telugu

[@vishnumurtypenta5396]

Telugu

[@vishnumurtypenta5396]

Telugu

[@vishnumurtypenta5396]

Telugu