Deep Cleaning DIRTY WHEELS | Satisfying Car Detailing

Today, we're deep cleaning the wheels of this 2008 Honda. Using wheel cleaners, iron remover, and degreasers, we managed to remove most of the dirt and gunk. The wheels were not in perfect condition and there are some spots that are fading and need to be refinished, but overall we're very happy with the results.
- - - - -
FOLLOW US ON SOCIAL MEDIA
Instagram - / setautocare
Facebook - / setautocare
CONTACT US
www.setautocar...
71 Marycroft Avenue, Unit 13
Vaughan Ontario
Please support us by liking and subscribing to our channel!!
For more videos like this let us know down in the comments.

[@SETProtectiveFilms]

Thank you guys so much for watching the video! Let me know if you guys like the video in the comment section! Stay Safe and Ill see you guys on the next one!

[@stevesvids]

Flat off the wheel hub mount areas and the cars hubs with a bit of fine grit paper. Clean off and smear on a thin coat of copper grease. 🙂👍 Extra Pro. A lot of the corrosion on wheels, wheel hubs, brake callipers is from wheel cleaning chemical residues. Too much caustic chemicals. Bilt Hamber Surfex HD degreaser APC has good anti corrosion inhibitors. Great product for all automotive areas. 🙂👍

[@Davidesavoia0908]

Tip: for a more effective action of products my advice is to use first a degreaser, then the iron remover and possibly a tar remover last

[@karenissimocrandall9962]

Seems right

[@ClaimedLocket83]

Tar remover before iron remover as iron particles could be hidden under the tar spots

[@christophermagri3330]

exactly my thought. Actually first a good rinse would not hurt. Rinse/degreaser/rinse/tar-remover/rinse/iron-remover/rinse/ironremoverwithbrush/rinse/gyeontirecleaner/gyeontireexpress

[@amierasycap4870]

@@christophermagri3330 iron remover function ? For rust or something ?

[@StayBlessed87]

Or just some vinegar and baking soda 🤣

[@pizzamagee6220]

I do have to say its nice to see someone do this to wheels that are extremely dirty and not some wheels that get washed every week. I do agree with another comment that a hosing or pressure washing could have been done before the iron remover I don't think its a big deal.

[@wr6392]

FINALLY! ACTUAL SERIOUSLY NEGLECTED WHEELS! 👍

[@SETProtectiveFilms]

I hope I can get some more wheels that’s actually dirty!

[@jmart4166]

I just finish clean my winter rims/tires ... I thought my set were bad ... I used wheel cleaner and dawn soap ... applied turtle wax seal and shine after. Great video ... take care brother!!

[@roscopervis]

Wrong order of products IMO. Wasting expensive iron remover first. Use the degreaser on all the wheel and tyre first. Makes the iron remover far more effective on the cleaner wheel and saves product.

[@SETProtectiveFilms]

roscopervis you got a point sir! I’ll keep that in mind ! Thanks for watching!

[@soldado23]

Finally, I see a car detail that does the details like me: Tire/Wheels Removed and Clean them!! GC = Good Clean!!

[@TripleGAutoDetailing]

Very nice video. Just did this on my Dodge Ram 1500 yesterday. Brush attachment on my cordless drill did wonders for hard to reach spots. 👍

[@JustBuckinAround]

This is awesome you did a great job and you deserve way more likes and subscribers, so I subscribed and liked the video!

[@SETProtectiveFilms]

Thank you for the kind words!

[@RogueScum]

Tip: do an initial rinse of the wheels to get off the loose dirt and grime before hitting it with the iron remover. Iron remover could've taken off anything underneath the grime.

[@budlanctot3060]

Maybe for your situation, but not for every situation. Mine were 2 to 3x worse than these wheels, and I've washed them a dozen times with various chemicals, lots of brush agitation, and have yet to find the "magic bullet". Pretty sure, that once the iron/brake dust has been allowed to remain on the wheels long enough, there is no bringing them back without refinishing the wheel.

[@tdbone35]

Just curious....why use the small detail brush when you could use a powered drill and cone brush to get the bigger surface cleaner quicker with less effort and the medium nylon bristles dont scratch most surfaces

[@SETProtectiveFilms]

Oh yea thanks man I’ll try them on the next one!

[@maksisdify]

I usually use small detail brush to clean small spaces like where bolt goes or other tight areas

[@CL4SSiCS]

I think a small detail brush is safer...

[@meanpaintandbody]

They r a set of $100 rims I think is more for the video

[@Kevink4240]

Now that is a nice treatment! Well done bro. You made those rims and tires look fresh new and shinny! 🤝

[@allanhuggett1705]

A good tool to get into the crevices on the back would be a dremel tool with a softer tip :)

[@SETProtectiveFilms]

Thanks Allan !

[@jorgenvonstrangle000]

Everyone: *uses car wash self serve brush with soap to clean the face and tires* Me: hold my bucket and brushes and wheel and tire cleaner, iron remover, and my tar remover

[@Southsidefulldetail]

Dammn I love watching videos in KZbin I love doing the same thing I been doing this since I was 12 years old since right now I'm going to my 38 years old on July well sending lots of blessings from down south pharr Texas

[@daibennett9224]

I’ve never used iron remover first but I will from now on for sure,good job

[@SETProtectiveFilms]

Dai Bennett yup give it a try! Thanks for watching !

[@masterspin7796]

Cheaper to buy some new wheels...add some *bling*...nice work you did!!

[@SETProtectiveFilms]

I wish I have the money for new wheels lol. Thank you for watching! ✌️

[@frazerparker2297]

So satisfying!

[@SETProtectiveFilms]

Thanks for watching! Happy new year!

[@ramirocruz8265]

Here's my way of doing this. 1 high pressure washer only water. 2 super power (agitation a must, some wheels require 2 this step 2 times) 3 iron remover 4 super power again 5 ceramic coating Turtle wax. Hybrid ceramic coating 1. 6 tire dressing 303. Blessings from LA. Bendiciones 🙏🙏🙏

[@SETProtectiveFilms]

Thanks for checking out man! Stay safe !

[@yu_yung09]

Lest hit this video 1million views guys btw nice clean up

[@SETProtectiveFilms]

Franklin Ardiansyah wow thanks for watching! Maybe one day!

[@sahilhussain2686]

Tip use a jet wash it could get most of the dirt of quickly with out using or wasting any of your products

[@franciscojavier3745]

Me ha gustado mucho como lo has hecho.muy bien.

[@SETProtectiveFilms]

Thank you Amigo! Stay Safe!

[@paulhughes3961]

Those wheels were very neglected, and without using an abrasive polishing wheel you did a pretty good job.

[@AQUALUXAUTODETAILING]

great job man!!

[@SETProtectiveFilms]

Thanks Boss!

[@Sharpidiot]

This has inspired me. Thank you for the demo.

[@JanKowalski-bj7ob]

cleaning winter wheels ....make sense xd

[@SETProtectiveFilms]

Hahaha should we do it again this year?!

[@dzat2636]

Oh my.. i really love this

[@davemurray2631]

I really don't know why this kind of video is so relaxing but I love it

[@SETProtectiveFilms]

Thanks for watching dave!

[@MikesAutoDetailing]

Great job

[@SETProtectiveFilms]

Oakley Auto Detailing ayy thanks for stopping by !

[@MikesAutoDetailing]

@@SETProtectiveFilms any time, everything.... see you on the next video

[@mrnic3guy305]

You got busy but I’m using a drill with some kind of attachment brush and pad

[@tonys623]

Zero naught steel wool works great for wheels that dirty and corrode.

[@SETProtectiveFilms]

you got it I ended up using them on the other wheels it!

[@alangligor]

Cool video! Keep it up!!

[@SETProtectiveFilms]

D Q Details! Hey thanks for watching our video! See you on the next one 😁

[@alanbarraza3977]

This was really satisfying!

[@pehassan160]

I did not see you’re putting chocks to the opposite wheels, for safety measures

[@SETProtectiveFilms]

some 2x4 is all I have haha

[@anyquratulain3522]

Excellent work

[@gercyg5549]

Awesome videos!!!! Keep it coming.

[@SETProtectiveFilms]

Thank you gercy ❤️

[@mozart4733]

Good to see someone scrubbing the tires aswell. I cringe when i see people "deep" clean wheels, not bothering to clean the tires, and then proceed to dress said tires.

[@jl5177]

Safe to say the etailing brush was goosed after? lol Mint vid mate, enjoyed this. Just got soem STI wheels for my WRX, gonna be doing this to them in about an hr :D Subbed my bro xD

[@SETProtectiveFilms]

enjoy man!! thanks for watching! :)

[@MrDjohboy]

Great vid, but wouldn't it be easier and faster to have a drill with a cleaning brush on the end?

[@SETProtectiveFilms]

Mr. New Stuff yup definitely! I have one I just forgot to use it 😂

[@whomitmayconcern]

Tracklist please? Amazing music.

[@Florian-qx4xi]

Fore those who wants to totally rim restore, you can sandpaper with high stone ratio 5000 10000 ,then you can get rid of these stains from the inside of the rim, try out first on rim you have , you can get more money for that, if the Customer wants a restore, maybe for sell this car

[@SETProtectiveFilms]

Good Tip Florian! :) Thank you for sharing your knowledge

[@sneekzonlock1170]

well done!

[@Racer_kmk]

Quick question, can you use conventional paste car wax on your wheels? I mean, some wheels are clear coated…?

[@NewarkNative25]

Hey, what is the name of the stands that you put under the car to hold it up?

[@SETProtectiveFilms]

those are called jack stands

[@NewarkNative25]

Ok thanks.

[@budlanctot3060]

Pretty nasty, neglected wheel barrels. Unfortunately, mine are even worse. Original/previous owners ignored mine for probably 14yrs. That iron/brake dust can permanently damage the wheel finishes when it's allowed to remain on wheel surfaces.

[@jeffreywillis3066]

Is there a way to get rid of the pitting after all the brake dust is removed?

[@simonemurgia9195]

Are wheel cleaning products that remove iron dust effective on brake disc? Mine has iron accumulated for at least 4 years, brands like Maguiar's, carpo and similar can do a good job?

[@SETProtectiveFilms]

Hey ! i believe if its on the break disc itll be tough and will take too long to remove , but im pretty sure itll help a bit if youre just cleaning it.

[@roymwale1967]

What Brushes are you using?

[@DJJumpdancer]

The Wheels need a respray :D

[@SETProtectiveFilms]

Haha yup👌🏼

[@anthonymansell6716]

Time for a vapour blaster... job done

[@saucysimpson259]

Blasting the bulk of the dirt off the wheels first would have been a huge help

[@dram615]

Great video! what kind/brand of floor tiles are those?

[@SETProtectiveFilms]

Hey David thanks for watching! They are from Swiss traxx

[@stephenwhitemore1719]

Small thing , alloy wheels should have stick on weights on the inside of the rim, hidden behind the spokes. Stay well, stay safe

[@SETProtectiveFilms]

Thank you Stephen!

[@None-kv7sd]

If they have a lip on the outside of the wheel then you damn well hit weights on there. Unless the person states otherwise.

[@joshuaderas6600]

Great video but once I saw those where Honda rims I clicked off 😪 smh

[@SETProtectiveFilms]

love scars lmao 😂

[@jasondeal298]

Should have used a tar remover and a clay bar. But they do look a 100% better

[@SETProtectiveFilms]

Jason Deal thanks for watching man! But yes to clay bar ! I just didn’t want to use it on this wheels since it’s just my daily! And sadly I don’t have any tar remover at that time.

[@stevenquintanilla9795]

@@SETProtectiveFilms definitely invest in a tar remover. One of my favorite products and worth the cost! I love carpro tar x. My car stays outdoors and gets lots of tree sap on it because of the area I live in. Tar x melts it right off, none of the other typical detail products I use have any effect on it

[@SETProtectiveFilms]

@@stevenquintanilla9795 stoner works fine too and i also have gyeon tar but just ran out! will put car pro tar on the next to buy list!

[@stevenquintanilla9795]

@@SETProtectiveFilms nice! Sorry I misread your original response as you don't use a tar remover. I'm sure those you mentioned work just as good as tar x. I was actually wanting to try Stoners as it's cheaper than tar x

[@shemmo]

i wouldn't trust a bit to the plastic floor under the jack stands

[@reaper_halo6010]

I would’ve use dawn and power drill brush

[@rrpinsanfrancisco8598]

Thanks for the tips. I found a great wool wheel brush on Amazon that works great on my Maserati GranTurmiso. Any recommendations on a wheel degreaser?

[@SETProtectiveFilms]

Hey! You can try the P&S brake buster it’s cheap and it works great . And some Iron or fallout remover. That’s pretty much all you need to clean your wheels! Thanks for watching

[@aarong678]

Would a steamer be easier and faster?

[@shadricksimms]

What type of brush is that your cleaning with?

[@Tommy369x]

What nmd are you wearing?

[@SETProtectiveFilms]

I don't really know what is called. so much colour way are coming out now a days

[@Tommy369x]

@@SETProtectiveFilms It's nice, your video and shoes

[@طعنةغدر-ث8ت]

You need harder and bigger brushes for rims

[@sammyn9345]

Harder is bad They cause scratches

[@Mr240SXR]

Is it okay to use wax on painted wheels?

[@SETProtectiveFilms]

Yess Sir!

[@smiley9061]

Who ever had that car ran over some people

[@SETProtectiveFilms]

lmao

[@Zenobiusz.]

Got some dirty wheels to clean but never so badly like yours. Did you use tire dressing both side or outside only? I always use wax to protect the rims, even cheap fk1000 is better than nothing. For me looks like these rims need to be restored anyway. :)

[@AndersTPetersen]

Would have rinsed the wheels after using the iron remover, you are rubbing all the dirt against the wheel and therefore scratching it..

[@SETProtectiveFilms]

The wheels needs to get refinish . And Might as well get all the iron remover stay there and use all the cleaning power it has. If it’s a better wheels of course we’ll wash it a diff way. Thanks for watching 🙏

[@peteredwards9147]

First thing we do is to remove the plastic centre cap

[@XaSxDAVE]

Do you have drainage under all your garage flooring? How are you able to wash on top of it?

[@SETProtectiveFilms]

Dan hey yes! We do have a drainage . Swiss trax are pretty easy to disassemble and to put it back I just vacuum it once a while n

[@insauceeweetrust9519]

What beat is that at the end ?

[@hbkakqn]

What’s brand/tools did you use to take off the lugs?

[@SETProtectiveFilms]

Hey man it was a Mastercraft kit

[@hbkakqn]

SET Auto Care Thanks, I still couldn’t find it. I’ve been trying to find tools like that for awhile. But I liked the video!

[@kennyman338]

Tuner lugs on stock wheels 🤔

[@SETProtectiveFilms]

Haha thats all we have !

[@_Hangman]

Good effort but it's refurbishment time

[@SETProtectiveFilms]

Yup they do but I don’t think I’ll be spending money for that! Well just keep it clean!

[@histriamagna1014]

oN 6.56 i see a dangerous crack on the tyre near the rim. That tire is gone. Change it.

[@jimthompson909]

Come on man where’s the impact? 🤦🏼‍♂️

[@Deathkiller-xw5gn]

I got one that may stump you what about a set of alloy rims with 35 years of wear how would I clean those

[@SETProtectiveFilms]

Deathkiller1408 0 damm 35 years ? you can still give it a good clean but It’s not going to come out 100% . But that will probably need to get re finish sand blast and spray a new paint/clear

[@iludry6510]

Do u guys know anything thing about Bugatti cause my dad broke his gear ⚙️ shifters

[@cruzzindodge]

Will the same products and process work on black wheels?

[@SETProtectiveFilms]

cruzzindodge sure it will! You can use some degreaser/wheel cleaner , and some iron remover. You will also need a softer brush or it’ll scratch the finish of ur wheels.

[@styleautodetailing]

🔥👍👍 top

[@SETProtectiveFilms]

Thanks man!!!

[@awesomeamber1702]

Why not a powerwasher?

[@singhsandhu6365]

Let's be true...nobody searched for this

[@MrOndrof]

I did

[@doozeschanyt9554]

If you see a dog that's black and brown running towards your car move your car cause its gon sh*t explode on your wheels

[@SETProtectiveFilms]

😂

[@doozeschanyt9554]

@@SETProtectiveFilms lmfao

[@carmoto-ky5lv]

Show us the way you are sitting is very important

[@scuffyxd7789]

Bro the thumbnail look like gold rims lol but it aint hahahah

[@SETProtectiveFilms]

ScuffyxD lmao 😂

[@danielbroad8363]

use straight up acid on rims that knackered not high end detailing products

[@SETProtectiveFilms]

Haha but where’s the fun on that? If use that it’ll be. 1 min video 😂

[@charleslincoln5357]

I wash and wax every couple weeks But I think I’ll do this on rims also now

[@Jack2421992]

At the beginning step it is much more rational and appropriate to have power washed the looser debris and caked on dust before using rim cleaner. That way you don't have to go back for seconds with the rim cleaner if that is your usual M.O.

[@danemaddalena9674]

You can use this on steel wheels

[@Blackberry0672]

Dish soap and water & a scouring pad will do the same thing

[@melted_pistons]

And scratch/marr the finish, you want the chemicals to do 90% of the work

[@alanjenkinson7812]

No clay bar. I wouldn’t put those wheels back on with the backs looking like that

[@SETProtectiveFilms]

I hear you man . The wheels are no where near perfect. Didn’t want to waste a clay bar to be honest . Plus it’s our shop car 😆.

[@maximusalvarado3875]

He’s probably tired after all that

[@BelLavoroAutoSpa]

Why the detail brush and why not a wheel brush? Just seems like way more work for no reason.

[@SETProtectiveFilms]

M_Spoon Vacuums & Detailing I do use wheel brushes and have bunch of them . But there is something about the detail brush I just like using them !

[@BelLavoroAutoSpa]

@@SETProtectiveFilms Gotta do what works for you then. They came out great 👍

[@josefe82]

limpiador de chimenea y listo

[@OnkelBenz86]

If you don't wanna waste your time just skip the first 3:30 minutes.

[@dylanmostovoj6952]

0:59 like 🫳

[@طعنةغدر-ث8ت]

I think you need something harder than this brush

[@SETProtectiveFilms]

Looks like I do need one haha. Thanks for watching man! 👊

[@طعنةغدر-ث8ت]

@@SETProtectiveFilms hehehehehe you look like drawing with brush not clean at all

[@SETProtectiveFilms]

@@طعنةغدر-ث8ت 😂 haha it’s an art

[@طعنةغدر-ث8ت]

@@SETProtectiveFilms this is war art i think hehehe

[@LuisCarlos-vw3ux]

Aqui no Brasil temos produtos melhores que esse pra limpeza pesada de rodas e motores de veículos!

[@carlosgueddes729]

No disrespect my brother but you lost me on this one the inside of those barrels are not remotely clean ,they need a good clean a good ironX clay job then Polish good wet sand it’s not good to show a half job .. just saying.😔

[@SETProtectiveFilms]

carlos gueddes fair enough. but all I wanted was to clean the wheels not to bring it back to 100% finish. claying and polishing was definitely not worth it . The finish of the wheel and coating was already peeling off. Appreciate you for watching . Maybe next time we can do a real wheel cleaning video!

[@VictorSilva-dw2xq]

Your not showing us or saying what you're using duh

[@Devo1987]

I'd rather throw my rims in a engine bay cleaner lol

[@SETProtectiveFilms]

lmao

[@ratj4715]

This is a lot of work for some really crappy looking rims. They look much better but not wroth the work.

[@SETProtectiveFilms]

Dave J yup! But hey it’s clean now and you watched our video 😃 thanks man! ✌️

[@ratj4715]

SET Auto Care Their clean but still are crap rims. And I was hoping you show something different that I could use on a nice set of rims but any moron could do what you did. lol 😆 they would’ve to be some really really nice rims to go threw all that work.

[@brendankavanagh8419]

I mean if someone pays you to detail crappy rims, you detail crappy rims lol

[@ratj4715]

Brendan Kavanagh I really can’t see someone paying him to do this to these rims. Who would. I take it he was just using these rims to show us how to do it. But like I said I don’t know if I would go threw all this for almost any rim. And I do go kind of crazy on my own car. I probably just got done probably cleaning my wife car for like 4 to 5 hrs on it. It near perfect but not taking the rims off to clean the back of them. Lol. I must say I did think about it before but talk myself out of it. It would’ve to be something that hardly ever drove at all. But even than probably not.

[@nurnabilah1921]

Eh. The roi on the washing and filming crappy rim seem good if it could get you 400k+ views and ads money in. :)