Deep Dive into SOLIDWORKS Hole Wizard

[@jenniferpeterson1762]

for a fully defined hole position, wouldn't you also need to specify the positions in the y axis?

[@lka55364]

I always get show custom sizing with completely differnt hole selecting once I trying to edit the hole that already applied. Is there way to get that issue out?

[@hughdiamond729]

Really simple request... I'm new to Solid Works and I've been asked to create a part. Steel block 100mm x 25mm x 10mm with five 10mm holes in it.... I've created the block. Struggling to create evenly spaced holes.. Help??

[@morphixmonarch]

You could use the linear pattern option to create a set of evenly spaced features.

[@joemaletta2767]

In SW sp2 what is the work around for the reamed hole size call out in hole wizard fit " press fit, clearance fit, nominal fit" there is no change on the drawing, every dowel hole is nominal ?

[@MisterBinx]

I wish someone would show how to fasten things together.

[@sudhansumtripathy]

Hi Sir, I have my 3D sketch in SS and when I click on the whole wiz the image is much more bigger than the sketch , what would be the solution. I tried doing one more sketch and extrude it and all the other extrude works fine with the hole wiz except the 1st one.

[@rwmatress551]

I am reverse engineering a part. I do not necessarily know the industry standard hole of which I require. Rather I know the dimensions of the counter sink and bore itself. Can I manually enter than information?

[@hawkridgesystems]

Hi Reed, thank you for your feedback! Can you fill out the form here: bit.ly/2DNqU9N and our engineers can reach out to you directly.

[@IanChandra-x8g]

ily

[@Hotshotracer91]

Watch how to use hole wizard tool in solidworks: kzbin.info/www/bejne/poPbnqqdjs6AhJo