Dell B2375dfw No Menu Won't Print Reassemble (FIX)

This video is part 2. In part one we show you how to disassemble the printer to get to the SDcard slot behind the Logic Board. This video shows the reassembly.

[@kenrodocker9148]

I know this video is older, but this saved me several hundred dollars on a new printer! Thank you! FYI, I also did bend the connector frame. I removed the 4 screws on the logic board, released the cabling to the left side connectors from the loom clip and was able to lift the board enough to remove/install the micro SD card.

[@rossmckenzie6983]

DUDE!!!!! This is an AWESOME video! We used the B2375dfw as a copier only. At 10 years old, when this happened, I was ready to take it to the junkyard. I was dubious, but it worked perfectly. Great directions!

[@michaelwrisley]

Wow...worked like a CHARM! Thank you for taking the time to post this. Printer was DOA after years of great service....now it's back in service!

[@amandac3546]

Dell told me that I would need to replace the entire unit. I ordered a $6 8gig micro sd card and it totally worked! Thank you so much!

[@quickstartbusinessservices6188]

You are welcome

[@joexman6194]

Thank you , I put a 32 GB sd card because I could not find any lesser than 32 GB ! Work great ! thank so much !

[@unomebabe2]

THANK YOU so much! I just replaced the sd card in my Dell B2375dnf. Your video made the process so simple and easy.

[@ashishmehta1554]

Great, thanks a lot, I work out at sea on a ship, and was able to install it all by myself. back in business.

[@MichaelCox]

Worked for our Comptroller's printer. You may have to check the wifi connections if you're operating wirelessly on a network, but even that worked after fixing the settings, resetting the printer, and resetting the PC which used it.

[@quickstartbusinessservices6188]

Great to hear

[@piotrn4246]

Thank you for help. Works great.

[@quickstartbusinessservices6188]

You are welcome

[@kencolosky9672]

It worked great - I was able to use a class 4 - 16 gb i had laying around. Thank You !!!

[@quickstartbusinessservices6188]

Welcome Ken!

[@chasgantz7728]

Thanks!!! Very easy to install!! Works great once again!

[@quickstartbusinessservices6188]

You are welcome

[@user-xk8vg3bz5h]

where can i find a image to flash the old card myself with a new not broken image

[@rbarkin]

new card has a mounting error how can I get it to work?

[@cartridgeworldscarboroughm7908]

Will changing the Micro SD card get rid of an error code for pick up roller? We changed the roller but the message remains. Thanks.

[@quickstartbusinessservices6188]

No.

[@DeeFPV]

i put a new sd card in and still do not have no screen

[@victorcardenas324]

Did you charged any information on the SD card???

[@quickstartbusinessservices6188]

No.

[@chasgantz7728]

Just install the card. the machine will do the rest